All these tools and he uses channel locks, he is one of us 😂

@johnbaum1000

9 күн бұрын

and the wrong direction 😂

@BumDogSuMo

9 күн бұрын

I came to say the same thing and there was your comment in the #1 spot!

@stanceworks

9 күн бұрын

I am a man of the people

@philmariop

9 күн бұрын

Those are parallel pliers. Hellasweet.

@danielgarrett1155

9 күн бұрын

Sorry to feel this way. Love the channel. But, watching him use those "left handed" pipe pliers, the wrong way, is so very cringy. First suggestion, only use Knipex. Far and away superior to most all brands. Secondly, turn them around . Give them a chance to work the way they are intended. I belive this is the reason most would see their use as "not correct". They are a perfectly good tool to use in this case, if used properly. Again, I love the channel. Don't change anything. Except the direction of the pipe pliers

The car alarms going off on the dyno pull is hilarious, you know its loud-loud

@familiewisse832

9 күн бұрын

We raced a mazda RX7.....when on the dayno....it cracket the tailes in the toilet 😁😎

Seeing 12V-13V means no charging. A used battery/good condition on its own should show 12.4-12.7. A working charger should show 13.5V to 14.5V, with highest number when the battery is discharged. When the battery sucks more power from the charger, the charger understand that the battery is empty and increases the charging voltage to about 14.5V and lowers it to about 13.3V-14V when batter is charged. If it doesnt lower the voltage it will cook off the electrolyte in the battery pretty fast. Hope this can help some young guys out there.

did anyone else have anxiety watching mike touch the lath chuck as it slowed with a long sleeve shirt on?

@philhodgson4752

9 күн бұрын

I was literally looking for this comment! So sketch. 😮

@stanceworks

9 күн бұрын

Yeah I definitely broke the rules there. :(

@b3nsb3nz

9 күн бұрын

Haha knew someone was gonna say something

@AggressiveSharter

9 күн бұрын

​@@stanceworks Yeah, for the love of whatever fantasy figure you believe in, do not touch the chuck, ever! And please, do not wear loose shirts/hoodies while on the lathe, you will lose sooner or later :/

@rbdesignsnh

9 күн бұрын

@@stanceworks not looking to shame, just want to make sure all the appendages stay where they belong. I've seen too many OSHA training videos regarding lathes.

I'm just a guy building a car in my garage, but the gremlins you've chased are very relatable. Good motivation on those days where it seems its all uphill.

17:20 “Certified Good Enough” SuperFast Matt would approve. 😂

The fact that you're setting car alarms off in the parking lot while inside doing pulls is wild. Poor Andrew's ear pro still not being enough while tuning though speaks volumes for just how loud this thing is.

@mrflippant

9 күн бұрын

Dude needs to learn how to properly insert his earplugs; they work better when they're fully in place.

This car really gives Hot Wheel vibes, maybe a collab with them to get a limited supply printed of this car? :)

every time i watch Stanceworks i see Kermit the frog not Mike B its part of what keeps me coming back and i smile the whole time i watch 😂

@frankowl8692

7 күн бұрын

I think the same. It doesn’t take anything away from Mike but it’s just a hilarious observation.

Number one reason I like watching Stanceworks is Mike finishes his projects and teaches us a thing or two along the way.

I love the fact that you are/and have always been so honest in everything you show. SO many youtubers hide their errors, mistakes and problems, to show/release a rose tinted video that is frankly false and not true to life. Continue to Keep it real Mike, I know you always will. Sick Burnout by the way.

@marco12535

8 күн бұрын

Exactly, and this way us viewer can learn something valuable on the troubleshooting procedure!

"I know it's just a burnout" he says after not doing JUST a burnout. That was a sick burnout!

It is something epic in this, seeig imho one of the most humble and calm car guys on yt, to wake up and choose violence, that sweet, beautiful sounding violence, in just a blip of right foot. Mike, You are amazing

All hail the long sleeve flannel as the fabricator's lab coat.

I love how you process / present these videos - just like the TV shows I used to watch as a kid. Great build, great work guy!!!

That was a lap weld on the catch can bracket, not a butt weld. Much stronger for sure, and it looks great!

@mattbettany1174

9 күн бұрын

I had to come to the comments section just to check I got that too 😆

@stanceworks

9 күн бұрын

Hah! Said it backwards and didn't even notice. Good looks though, it's definitely a lap weld, not a butt weld.

@mattbettany1174

9 күн бұрын

@@stanceworks I do the same with my kids names 😂

@odie0815

9 күн бұрын

@@mattbettany1174 why are you lapwelding your Kids together? - they will never become independent this way ;)

@mattbettany1174

9 күн бұрын

@@odie0815 😂😂😂👏👏👏

I thought I heard some thunder the other day, then I realized it was Mike's Model T burnin rubber! I absolutely love this thing and have watched every episode numerous times. This thing is epic! It's the ultimate in sketch yet absolutely beautiful at the same time. A true work of art! Thank you for truly seeing this thing through to the end. After all, it was the truck that turned me onto your channel in the beginning. And now I've binged every edit you've made and uploaded. Sick, sick truck man! And thanks for doing what you do.

Love this thing. No way this would be legal in the UK. I watched on my computer with the sound channelled nice and high through my stereo and the neighbour complained. Imagine it in real life!!

Bravo with this build man 💯👌🏼 it’s just amazing 🙌🏼 That burnout was a symphony! Hearing it sing was worth the wait 👌🏼👌🏼

Henry Ford, 06/01/1927 - The Model T was a great educator in this respect. It had stamina & power. Mike - Had stamina & power? Hold my beer.

That GK Fit though 😮‍💨

That is one seriously angry piece of machinery. Great to see it all together again!

That’s a sweet modern take on a “hot rod” well done!

The emotion captured by the burn out is similar to when you get the Ferrari running for the first time. I was genuinely excited and happy for you hitting these milestones. I know you do this to share your work, teach us, and you really enjoy the process. And that's also why I follow you and your work. But that burnout captures so much raw emotion. I watched from ~37:48 to the hard cut over and over and over. So cool to see this thing laying some 11's. Fuck Yeah Mike!

Hi Mike, As I am sure you know, there are some great (and quiet) in-tank fuel pumps are on the market that can easily support that power level.....Just in case that air-raid siren pump you have now gets intolerable. Maybe also rubber-mounting it would help. Love this build!

Mike you videos are so easy to watch. I love your naration technique over the top.

…aaaand, now I’m buying a spark plug gap tool. Never knew they existed, but I will save time beating the plugs on the workbench! 😁 Thank you, Mike for your semi-dumbed-down, thorough explanations on your builds-love the vids, love the channel!

That chassis flex on the burnout...

@tylergeosano4043

9 күн бұрын

Looked pretty stable to me, even caged chassis will flex. My caged e30 will flex about a half inch upwards behind the front towers when I jack it up by the front core support jack point (partial tube front end, caged interior, no cage tie in to towers per rulebook). Anywhere where the cage doesnt triangulate will likely move, and where it is tied in, will flex but in a much less noticeable increment. The model A looked great under load throughout this video

Great video. I'm still shocked this channel doesn't have more subscribers, some of the best car content on YT imo.

Devon here from South Africa. I need that damper because I guessed the horsepower wrong. Jokes aside, been loving the content coming from you guys

Nice to see you finally send it. Thanks for posting

Boy that engine SCREAMS... Just imagine a FF Daytona Coupe with that thing under the hood... My dream American car.

@blucheer8743

3 күн бұрын

I was thinking the same thing! Those Daytonas are awesome Mike should build one of those and flip it they are sweet!

@davegerrard6857

23 сағат бұрын

The FFR aren't all their crack up to be! Superformance is a much better way to go!

Now I want to see this thing go down the quarter mile.

I came to this channel for this build. I loved it, all the ups and downs. Can't wait until the next build.

Why was I this stoked about watching Mike do a burnout in this thing for the first time??? 😂😂😂

Sounds brutal! happy you've stayed persistant and reached this point.

You can take all the tools in the verse and throw them on a project, but if it’s not fun and interesting it’ll never get done! Son this was fun and definitely interesting as it seems to get done finally. Congratulations!

This car is so wild, always love the updates on this one, thanks Mike.

Awesome roar from the truck! Love it!

Your builds are always in depth and impressive

Definitely a cool built.. can tell it took alot of work,time and cost!! Keep up the good work!!

What an episode!!! Thank you for the content sir!!!

Love it, that was one solid burnout for the first one it's done, not only skilled fabricator, but skilled driver too :)

Congrats. Always feels good to finish off a project with a burnout 😁

Love this build, so many cool touches. I keep pausing the video to look at things I didn’t notice earlier…WOW. Would be awesome to see it in person someday. Congrats!

That wasn't just a burnout. That was a monster asserting it's dominance in the wild. So cool to see the project come together.

Limiter bashing is like Crocs of the car world. Glad you found second gear there.

That thing sounds all the right kinds of grumpy! That smile at 36:33 says it all... Congrats!!!

👏🏼 Work of art 😍 757HP is driveable 👍🏼 job well done 🤜🏼🤛🏼

Great work! Such a beast!

Very nice work, congrats.

That H&R Damper would look so good on my wall, maybe it will balance out the upstairs neighbour stomping around 😅😅

been itching for a new Stanceworks upload. haven’t even watched it yet, but 40 minutes of fresh content has me stoked 🙌

You kinda sprung the competition prise on us! Shocking you would consider doing such a dampner of a thing! Love the model A by the way! CONGRATULATIONS!

Such a flintstone looking car, it's great. Which reminds me, did you know the people of dubai don't like the flintstones??? But Abu Dhabi do!

She's a ripper!!! Congrats on finally getting to do a burnout. Can smell it from here. Merica!!!!

I came to your channel because of this car…..It’s still my favorite…congrats!

dude, i had to turn down the volume on this video so bad, otherwise my speakers would’ve explode… this is such an insane and amazing build! greetings from germany

If I won the lottery … I wouldn’t tell anyone …but there may be signs 🤣 (this would be #1 - FORD TRUCKS ARE THE G O A T!!!) Great to see this build getting buttoned-up - What a BEAST!

"WHAT'D HE SAY?!" "WHAT?!" "I CAN'T HEAR YOU!" "BURN OUT?!" "OH, BURN OUT!" "IT DID IT!" Long over due!

One of the best builds on KZread

Just can’t unsee those angled rear bars. Too rock crawler on a street rod. Square em like a truck bed. You are doing what you were meant to do all along, thank you for sharing your Adventure.

just ordered my skate deck and beyond stoked to throw it in the shop!! #motivation

Also that dyno pull audio was an absolute dream

17:57 That’s actually the main reason I watch. 👍 I’m a big fan of your video style.

Sad to see the car go, but I'm very glad it's doing great!

Mike, I just grabbed a Deck! Keep up the great work!

As i understand the pursuit of a perfect build. I verry much apreciate this video as it's a more hands on real life stuff that works great despite the 8/10 look aspect of it. Good one 👌👌

Well done , great project , great sounding ford engine

What an incredible episode! Forever my dream car! And that standie at the end, sheeeesh! Mike I hope you do some Merch with the Model A, posters, shirts, I would buy it all!! Incredible content as always!!!

I love all the technical stuff😂😂😂❤

Wow. Love the episode. Tell your Mom, Dale and Steph say Hi!

just ordered a board! keep up the good work sir!!

What a ripper. Awesome!

Somebodyyy buy that thing, I want the M1 right nowwww!!! ❤😂Go Mike!! Greetings from South Africa! 🎉

36:10 the way it blows the bushes out of the way 💨 🙌

Dude lemme tell ya mike this is epic and the journey has been insane. My wife and I were able to work out me going into auto-tech school this coming sept because of all the drive and everything your videos have made me have. Like you said a million times - if you can do - why cant I? my little 2 car garage (affectionately nicknamed 'The Fockery Lab') is already home to a couple projects - 1 of which is my jump into fabrication in the form of a 92 Toyota Previa that I wanna sorta make like a Prerunner van out of LOL big fan brother. Came a LONG LONG way

you are my customization guru

I want the damper because it's impossible to be depressed when spring comes around!

Mr. Andrew is a beast when you got the kind of cars that you got in your garage and they have a technician with that much experience with computer and wiring electrical problems. Is God sent when you gonna finish the truck and put the wing back on the back, it looked a lot better, and the way that car is built with the power that has put the back onto the back of the truck. I miss seeing that vehicle I think it’s the best one if you will finish it…😳😳😳

I don't want the damper, I'm just here to boost the channel!!

That damper would be awesome to hold my hopes and dreams!

Your burnout has now opened the eyes of every aspiring rapper as a potential buyer as soon as they hit it big.

My Lord if I ever had the cash to buy a hot rod this would be it. Insanely cool ride.❤

Great episode. Lots of funny moments, intended and otherwise. Andrew wearing the respirator and “ignore the fact that I’m using a steel wrench on AN fittings”. 😂

loving the model A...call it "Old Smokey" cause it certainly does smoke the tires!..

Sick burnout bro, love the truck, can't wait to see the Ferrari

As much as I hate everything Ford, you have built a beast my friend. Simply awsome from build to video production!✌️

Congrats to the winner, I was pretty close but no cigar 👌

No rant just pure madness to have the valvecover not be -8 orb. That man typo'd in the factory and no one noticed or I'm Santa 😂

love your videos brother!

@TomBudin

9 күн бұрын

greetings from australia

Can we start a campaign to get Mike and this car a Gumball 3000 entry. Could you imagine this beast blasting past all the high end exotics.

New vid hell yeah

knipex smooth parallel jaws so nice

Machine in action

Heck yeah man

a love that mad maxx model A!

I'd like the shock assembly so I can tell my wife it's the only part left over after finishing my current project "must have been an extra"

Woah, my wife has been dying for me to find One Of The Old Dampers Off Of This Model A for our living room wall for a while now! She'd be stoked if I put this up without telling her!

Dang, my guess was really close…to the first dyno pull. That thing is sick. Strapped to the dynopack shows how small the car is compared to the engine.