Nice to watch step by step. Good job nick.

Nice work on sourcing those sliders and a well presented installation.

Looks great mate. Great vid as always.

Thats so strong to protecting the car sids .. good working

you just levelled up

Looks way better Nick and obviously will do a far better job of protecting the truck. Cheers Steve

Ohhhhh mean one man looks good keep it up over of to New Zealand hit same mean as mud

We need an oil catch can video definitely

@LowRangeNick

4 жыл бұрын

Stay tuned guys, catch can has been ordered and I will be putting together a video in the next few weeks 😊👌

Nice...👍🍻...

Nice one, I wish I had seen the video before I did mine. I got Opposite Lock sliders and they use a U bolt to hold them in place. They are well made but hard to fit around the chassis on the fuel tank side. Brake lines are in a bitch of a spot for U bolts at the back.

@MrHayleynick

5 жыл бұрын

they are xrox brand, good sliders but I remember the same issue fitting to a triton.

Hey Nick, what is the width of the side steps from the furthermost part of the door to the end of the side steps? Need to see if there is enough room for my foot. Btw fantastic videos, great work mate.

Hey Nick, As you went with flat rock sliders rather than 20 degree angle one, any reason you didn't consider the side steps with rails that attach to the bull bar for better side protection? as I'm looking to get the rock slider, good to get your opinion

Highly recommended under body protection to your vehicle if you don’t have it yet. I’m surprised Isuzu don’t sell their vehicles with a factory ones.

Nice set of rock sliders I am thinking on a set for my 2017 hilux their web site mentions a flat top option I guess they are wider but also a checker plate top is that what you have the standard plus checker plate regards Mike

@LowRangeNick

4 жыл бұрын

Hey Mike ! They are a great rock slider and step. Very very strong. I got the standard flat step with checker plate on top with the satin black textured finish.

Fc in thailand

hey nick were can i get a pair for my d-max. loving the vids

@LowRangeNick

4 жыл бұрын

Cheers Hayden! Just google SCFabworks and it should bring up there website. You can order them online 😊

Looks good! Are you going to add a bash plate to replace the plastic under tray?

@LowRangeNick

5 жыл бұрын

yeah definately :)

I really like these sliders, think I'll get a set, do you know how much they weigh?

@LowRangeNick

4 жыл бұрын

About 30kg each I think 👍

@taichiworld

4 жыл бұрын

@@LowRangeNick Cool thanks :-) You thinking of fitting any rear protection? Or do you find the small bum on the MU-X is pretty out of the way?

@LowRangeNick

4 жыл бұрын

@@taichiworld Havnt had any issues with damaging the rear bumper it has a pretty good approach and departure angle. Its alot of extra weight as well. Not looking at fitting one in the near future. 😊

@taichiworld

4 жыл бұрын

@@LowRangeNick Yeah I'm in two minds, it's is extra weight, but only about 33kg for a Kaymar, once you remove the 34kg weight of the tow bar, even the cost is only about $1000 more than a good tow bar. But then if you don't need it any weight and cost is a waste I guess. Glad I found your channel as you seem to have set up your MU-X very similar to how I want to :-) Can I ask how much lift did you get out of your suspension upgrade and what size tires are you running? I like the look of it, and seems to go really well off road :-)

@LowRangeNick

4 жыл бұрын

@@taichiworld 50mm lift and 265/70r17 tyres 😊

👍. Do u happen to tow with it? If so what do u tow please? Ie caravan, trailer, weights & how does it handle?

@LowRangeNick

Жыл бұрын

I only tow a small box trailer. Most I've towed is around 1t. You don't even know the trailer is there with that sort of weight.

Hi Chris have a 2019 Mux I have a question. I was at glasshouse Mountain and I had found out the hard way going down a ledge and my side step has been bent upwards. Would my side step protect my vehicle or around the drivers side doorwas the damaged step. What should I look out for to check for damage

@LowRangeNick

2 жыл бұрын

Hi Scott, the factory side steps are made of thin aluminum and bend easily. They can damage the sill sometimes when they get bent. You could remove the side step and check for damage or bend the step back into place while it is still on the vehicle. Your best bet would be to get some good rock sliders if you are going to be doing more off-roading. :)

@scottcarder9543

2 жыл бұрын

True Nick, It's funny because no one really calls them rock sliders as I was told insurance companies don't like them for some reason. I'll keep searching for steel tubing that will look after both the sills and a little of the door. By the way your Mux looks dope yo 👌 🔥 🙌

would it be pretty much the same to fit them to my Dmax

@LowRangeNick

4 жыл бұрын

Yep, pretty much the same!

Boring old question Nick - do you happen to know the weight of the rock sliders and that of the original side steps?

@LowRangeNick

5 жыл бұрын

Hey Benny ! Thats a good question. I dont know exactly but i would think the standard steps combined would weigh maybe 15kg or so and the sliders approx 40-50kg combined. 😊

Hey mate do the dmax steps fit on the mux?

@LowRangeNick

3 жыл бұрын

I'm not sure Dave!

Hey mate, are these the standard size or the fat bars? Also is that the Sahara finish?

@LowRangeNick

4 жыл бұрын

Standard size with Sahara finish. 👍

Are these the flat or angled up ones? My eyes aren't as good as they used to be, appear flat?

@LowRangeNick

3 жыл бұрын

They are the flat step.

Are they ADR airbag compliant?

@LowRangeNick

5 жыл бұрын

Yep

@noodlefoo

5 жыл бұрын

@@LowRangeNick Cool.

What made u choose that brand?

@LowRangeNick

5 жыл бұрын

Because they are built solid A/F and well priced 😋 they are also made down on the Gold Coast.

How much money have u put into the car since u have got it including the wheels ect

@LowRangeNick

5 жыл бұрын

Couple of grand 😂

How long did you wait for em ?

@LowRangeNick

3 жыл бұрын

About 4 weeks.

Why don't you get a pick up truck like isuzu d max!

Hey mate, are these their standard or fatboy rock sliders?

@LowRangeNick

4 жыл бұрын

Standard 👍

was dat PPD ?

@LowRangeNick

4 жыл бұрын

SCF - Southern Cross Fabworks Rock sliders

Are these the scf standard rock sliders or the "fat boys"?

@LowRangeNick

5 жыл бұрын

They are the standard sliders. I think the fatboy ones would look a little silly on the mux because they are massive haha

@michaelgooley229

5 жыл бұрын

Oh OK no worries lol. I wasn't sure that's all