Check-out all the other D-Max content here -> kzread.info/head/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB

After a year of pretending I didn’t need this tail gate lock, I finally gave in. And ordered one. Full of confidence in installing this because I have a very thorough video to Guide me. Thanks again Adam.

This looks like a great product. It should be standard on all new vehicles as well as easy up/down tail gate assist.

Had a small issue with this one (I got my car on Thursday) I cannot for the life of me get the loom through that bloody rubber grommet on the firewall. So I have stopped and reset and I will look at it later. I also put in the tailgate storage, bit of a pain getting the alignment sorted correctly, but it is in and finished now. Tailgate struts, on the left hand side, one of the screws was so tight it stripped the face, so now I will have to drill it out and replace it before I can put the left side strut in. Fuel filter in and done, putting the inline adapter into the original pipe, what a pain. Window module in and done. Perfect. Bonnet struts in and done. Munji hard intercooler pipes, in and done. Rear indicators and rear lights replaced with led's. Have the catch can and the UHF sitting on the table, but I'm a bit over it now so I think I will go out and have a few beers with mates before I continue. Don't think I would have got through it all without your excellent videos, so thanks for the help mate. Got an EGR Dust Defence Kit on order, as well as well as some MaxPro Floor Liners.

So informative! Should have turn on/off button for some safety features e.g when towing. Cheers Champ!

Thanks for this video, I will be doing this soon. And you have good quality audio, a rare thing on KZread :D

@VideoShowMeHow

2 жыл бұрын

Still trying to improve 👍

Love it! One of the first things I will be doing to my XT when it arrives along with the tail gate assist. Would love to see a catch can set up next. Loving the videos 👌🏼

I just installed the tailgate lock thanks to Adam it was much easier. Cheers Wayne

@VideoShowMeHow

2 жыл бұрын

Good news 👍👍 Congrats again on winning the giveaway

Hey mate love your work bought one of these today, watched you video literally installed in under 30min .. great information when installing found this so easy to install after watching. Great work can’t wait to see what you install next on your DMAX so I can do the same.. cheers

@VideoShowMeHow

3 жыл бұрын

Thanks mate!

I agree the tailgate assist and the x-terrain should come with with tailgate central locking as something that makes it more appealing and value for money!

Great video - I believe that both the tailgate and roller shutter should have an integrated automatic locking system as a standard item on the top of the range Ute now days.

A great mod for a great vehicle. Can’t wait to get this and the tailgate assist installed when my MY21XT arrives. The after-market market would suffer if all these extras were added from factory and the new DMax range certainly have a lot of inclusions, but a proper fully automatic central locking system should be standard. Great vid, too 👍🏻

Great instructional video. Best part is your work boots mate!

@VideoShowMeHow

Жыл бұрын

Safety first 😁👍

When putting the original lock metal parts together, push the actuator into the metal part as far as you can get it. If it doesnt go in far enough it wont lock properly. With the rear tailgate liner, once you have unscrewed the four screws just unhook the right or left tailgate bar and slide it out rather than trying to fight with the rubber seal. Prevents damaging the seal. As far as the grommet goes in the firewall, I would not pop it out, just cut a slot in it to get the loom head through and seal it with silicone at the end. It is impossible to get the grommet back on particularly with large hands. I have been going at it for an hour and a half and am giving up on it for the moment. I have no idea how I'm going to get it back on.

Western filters catch can! Easy mod for anyone and worth fitting for engine longevity

Great videos your making me get itchy feet for my new rig to show up. As a tradie the tailgate lock should 💯 be standard fitment. Can’t wait for the next vids.

@VideoShowMeHow

3 жыл бұрын

Cheers mate! More to come! Aiming for every Friday

What is wonderful job u did. Thank u for your show this video. I will follow your video and do my D-Max too.

Awesome Adam.. like most Guys first mod ill be doing...When My X Terrain finally arrives..😭

Finally just got around to doing this, hardest part was the bloody rubber grommet, I recommend some sika around it to be sure no leaks! Thanks for the video mate!

@VideoShowMeHow

2 жыл бұрын

👍👍

Great informative video, If my X-Terrain ever turns up I will be fitting this on it! Should have been included as a standard item on the new D-Max.

Very helpful video for when I get to do mine. This is probably better then a factory item if they made one.

Congrats on the Videos After watching the central locking one I will now get the kit and install with confidence of the support video👍👍 Can you let busk now what you have planned in future Vids?? Pete

@VideoShowMeHow

3 жыл бұрын

Thanks. There's a heap coming, smaller mods (think window modules, switches etc) to UHF to lift kits. Hopefully one each Friday for you to checkout 😁

Great video, straight to the point with no useless information. I would like to see a vid on tailgate seals as there seems to be a few different universal and model specific kits about and it's hard to tell which one to buy without trying them. I've ordered the Trac folding mirror module which I think should also be included standard for a top spec X-Terrain. A lot of the extras people on here are asking for seems to be standard on overseas models. I've added gas bonnet struts to mine, but they are a custom made setup I designed and made and not like the ones on Ebay that run along the sides of the engine bay. Mine sit right at the back near the hinges so the engine bay is completely clear of obstructions with the bonnet up, best mod i've done so far. The standard bonnet stay is a joke on a 2021 vehicle and a pet hate of mine being a mechanic, as they always seem to be in the way when working on the engine.

@paulg101

2 жыл бұрын

Track folding mirrors module?

@gwhite618

2 жыл бұрын

@@paulg101 "Trac" is the brand name of the folding mirror module. Sorry for the confusion.

@paulg101

2 жыл бұрын

Trac Electronics. Any reason why you went with the HSP tailgate central lock kit vs the Trac Electronic central tailgate kit?

@gwhite618

2 жыл бұрын

@@paulg101 Trac don't make a kit for the 2021 D-max yet as far as I know. I asked them about one when I got my mirror module and they said they were going to do one but weren't sure when, due to the chip shortage I think?

@paulg101

2 жыл бұрын

Just ordered the Trac mirror and window module

Cheers for the info, bought one from your link, installed this morning, so easy, works well!

@VideoShowMeHow

3 жыл бұрын

Nice!

love this channel for all the things ill be doing once i pick up my silver xt!!, The mods i think should be included from factory, tail gate assist also seat warmers being a top model :)

@VideoShowMeHow

3 жыл бұрын

How far away is it?? Waited 6 mths for mine, was shakey there for a bit but so glad I waited, well worth it!!

Great vid. Get my X Terrain in 2 months, and thought central lock tailgate was standard - oh well. Another standard feature should be heated and cooled front seats.

@VideoShowMeHow

3 жыл бұрын

Cheers mate! Not long now hang in there worth the wait 👌

Good job mate and that would have to be one of the first things added at factory that isn’t. Look forward to watching more of your build and hopefully I can get the prize 😜

@VideoShowMeHow

3 жыл бұрын

Good luck with the draw!

Great video! Would loved to have seen the tail gate lift fitted as standard.

Great video of the detailed install. Having the side mirrors close up when locking and open up when unlocking the car should be from factory setting aswell!

@VideoShowMeHow

3 жыл бұрын

Video coming of exactly that 👍

Awesome Video. HSP tail gate assist and central locking. Also a dust seal kit should have been a fitted in the factory. It would be good for Isuzu to support Australian companies and offer these products at the dealers. Keep up the good work..🙂👍

@VideoShowMeHow

3 жыл бұрын

Thanks for the comment 👍👍 Appreciate

Only a minute and a half into the video but I am keen to watch more and unless swayed otherwise I feel like I will get one of these myself. Hopefully I can be fortunate enough to win one from HSP and your channel but nonetheless it seems like a very good addition and should be standard from factory.

@VideoShowMeHow

3 жыл бұрын

Cheers guys, good luck ✌️

Great video. They should have included the module to fold the mirrors when the car locks from factory like every other ute on the market

@VideoShowMeHow

3 жыл бұрын

Agree, literally filming the fix for that today 😁

Great Video, these should be standard these days, also heated mirrors in conjuction with rear demistors would be great.

Great video. Keen to watch more. Couple mods they should have with the car. Button to turn off safety features while 4 wheel driving or towing. As well as proper "welcome home" lights like normal cars.

@VideoShowMeHow

3 жыл бұрын

Thanks mate! Do you mean the headlights staying on? I though the xt was mean to have this but come to think of it I've never seen it work

@chrisgunn5858

3 жыл бұрын

Your supposed to turn car off then flick thr highbeam towards you. The can then beeps cause the lights are on. Once you close drivers door the lights stay on for about 30 seconds. It's annoying to do if you have sleeping kids

@VideoShowMeHow

3 жыл бұрын

@@chrisgunn5858 Ah what! But you have to have the stalk flicked forward to auto high beams to work. Hmmm shouldn't have to do anything :( I reckon Isuzu should collate some of this stuff and put it in a software update

Great video, very informative as always! 👍

Great video mate, they should have had a button that directly turns off all the safety features rather than going though the settings each and every time you turn the ute on and off.

@VideoShowMeHow

3 жыл бұрын

How do you find the IDAS? Once I turned the speed chime off I've found to be pretty good?

Thank you so much for this, given me the confidence to attempt this. I think XTERRAIN should have auto dimming rear view mirror.

@VideoShowMeHow

3 жыл бұрын

You'll be fine mate 👍👍

Great how to for the tailgate lock install. This and the gas strut tailgate should be factory fit but at least HSP have us covered

Love the video, would like to see installation of a light bar

Great video. Gotta get me some of that tail gate assist, that tail gate lock is a sweet piece of kit too. That should be standard on the new Dmax.

Thanks for video, definitely be doing that on ours. Cheers

Looking forward to start my mods. Thanks for the information.

Awesome videos mate. Definitely the tail gate lock should be standard on the XT’s. 🤙🏻

@VideoShowMeHow

3 жыл бұрын

Cheers!

Another great video mate. Pity it wasn't standard equipment. Will be one of my first options when she arrives. How about a CB install, maybe hidden under console. Hopefully a gme xrs-330c. Great Aussie made product. 👍

@VideoShowMeHow

3 жыл бұрын

Cheers mate, def doing a UHF, under the cup holders hidden away seems the go with the handset plug at the gearshift 👍

The tail assist, tailgate central locking and a 12v plug in the tub for sure

@VideoShowMeHow

3 жыл бұрын

12v system currently being planned out, def need some plugs in the back for fridge etc 👍 Thanks for watching

Love to see a video on the mirror fold kit for the x-terrain

@VideoShowMeHow

3 жыл бұрын

Watch this space ;)

Electric remote locking roller shutter would of been a handy addition.

Cheers for the video, thought for sure all new utes would have tail gate central locking especially when the come with a roller like the xterrain.

@VideoShowMeHow

3 жыл бұрын

I know right!

@mitchwight5441

3 жыл бұрын

@@VideoShowMeHow I picked up my xterrain this week and need to order this, what's the best place to purchase the hsp gear?

@VideoShowMeHow

3 жыл бұрын

@@mitchwight5441 links in the description 👍 Congrats on it arriving!

Have just enquired about one of these 😁. Would have been great if the tailgate locked with the central locking as standard.

@VideoShowMeHow

3 жыл бұрын

Link in the description :)

Thank you for these tutorial videos, Adam! Curious, is the terminal different for left-hand drive?

Love it will be getting one for sure 👍

Hey Hey, another great vid.. Keep it up. Ofcourse this item should have been included. Simple little things which would have made the world right.

@VideoShowMeHow

3 жыл бұрын

Cheers mate! Yeah like an auto dimming rear view mirror too right?? Weird is has just a flippy one

XT arrives this week! tail gate lock should definitely be included from factory. No point having a lockable lid/roller shutter without a tailgate lock 😅

@VideoShowMeHow

3 жыл бұрын

Heck yes bet you're excited 😁🎉

the xt seeing as it comes with a roller cover should come standard with 2 things. 1. tailgate lock 2. tailgate seal

Torsion bar on the tailgate would have been an easy inclusion for Isuzu and maybe electric roller shutter for the XT buyers.

the Dmax should definitely have a tailgate seal on all the tub back models as standard. They have some whopping great gaps and you can fill a tub with fine bulldust fairly quickly.

Looks easy. Not something I thought of.

Great informative Vid, Should have got the Auto Dimming mirror from Factory!

@VideoShowMeHow

3 жыл бұрын

Cheers mate 👍

Great video, looks like a much needed mod! Other than that, only thing I think is missing is a 360 view camera

Another great idea and product. Another mod should have been when you lock the xterrain the side mirrors should retract also.

@VideoShowMeHow

3 жыл бұрын

I know odd right? Have a mod for that being install this weekend though, will be making a vid for that so will be up on the channel in the next few weeks 👍

@angelobarbatiello802

3 жыл бұрын

@@VideoShowMeHow awesome, I enjoy watching your videos, they are very straight forward and clear. For someone like me I find them very informative. Keep up the good work mate. I'm crossing everything for this competition 🤞

@VideoShowMeHow

3 жыл бұрын

Thanks mate! Doing my best to have out a new one every Friday ✌️

Nice vid. Bodyline tub storage box next?

@VideoShowMeHow

3 жыл бұрын

Sure is ;)

Where did you get your black tailgate protector? It looks great and I’d love to get one for my new X terrain too 👌🏾

Congrats VECALAISV you've won! Get in touch so we can get you your kit!

100% agree with guys below, it should have been factory done. Especially the terrain which doesn’t even have a proper key. Thanks for the video, looks easy to install. Looking forward to more on the dmax from you.

@VideoShowMeHow

3 жыл бұрын

Cheers mate, pedaling hard to get a new one out each Friday 👍

Awesome kit to have on your vehicle.

Think there should be button to turn off the driver assist bits and peace’s for towing or should turn off automatically when you plug the trailer wiring harness it just like the reverse sensors Thanks for the videos very good

@VideoShowMeHow

3 жыл бұрын

Cheers! Make sure you subscribe, lots more to come :)

I have a question - can you still use your car key to physically lock the tailgate even if you have successfully installed the tailgate central locking? For my situation, I can use the remote key to lock all car doors including the tailgate but i cannot use my car key to lock the tailgate (although i can use my car key to lock the driverside door).

When i get my xterrain this will be an add on and should have been included

Great vid..seat heaters next👍

Love my D-Max!! Would’ve been nice to have wireless charging and an auto dimming rear view mirror. Great car nonetheless.

@VideoShowMeHow

3 жыл бұрын

Totally agree!

Nice clean install. 25k plus on my xterrain already. Loving it! Gave it to my dealer when picking mine up about no Central locking to the tub. Should be standard. Cheers for the installation vid.

@VideoShowMeHow

3 жыл бұрын

Wow nice! Just ticked over 1k on mine haha

I’m going to run 2 x relays and splice in the green and blue for a canopy central locking to control to open and close relays. Will this work?

I have just bought my very first ute so very new to the lifestyle, I have bought a 2021Mazda BT50 GT, Could you please let me know if this will fit the BT50 as they are essentially the same? Thanks

@VideoShowMeHow

2 жыл бұрын

Yep sure will, the bt and dmax are basically the same mechanically, just different interior

@VideoShowMeHow

2 жыл бұрын

Almost all of the vids on the dmax build (checkout the playlist 😄) are the same for the new BT50 as well

Has anyone tried the trac electronics version. About $100 cheaper and their window module was great. Would think should be same quality ?

Should of included the option for the mirrors to fold on lock. Weird that they didn't.

@VideoShowMeHow

3 жыл бұрын

Agree (install vid coming soon 😃)

Light bar install please

Done - Do they not also do the kit that automatically folds in the mirrors as well as locking the entire car ?

@VideoShowMeHow

3 жыл бұрын

They sure do, have it in an upcoming vid 😁

Watching now and another great product. 👍🏻 Will this work on an 2021 LSU without the keyfob or push button start. Also both moss you have done should be installed as standard

@VideoShowMeHow

3 жыл бұрын

Hmmm does the lsm have central locking?

@PROCOPO

3 жыл бұрын

@@VideoShowMeHow LSU yes is has central locking

I have isuzu dmax 2023 model base option it s center locking system working with key only no have the remote . how i can add remote for the same. where i can buy the module and remote. Please suggest

@VideoShowMeHow

Жыл бұрын

I don't think it's possible to add remote central locking separately, You may be able to add it if you can find the modules from a wrecked higher model DMAX maybe but would probably be a bit of work

I think the side mirrors should auto fold when the car is locked from factory. Also tailgate assist should be standard.

Mirrors in and windows up when you lock

Hey. How do you re-fit the grommet once your all done. Is there any easy ways. Do you need to pull the plastic part off??

@VideoShowMeHow

2 жыл бұрын

Yeah it's a pita. I ended up unclipping the white plastic part (there's a clip job the bottom) and just reinstalling the rubber grommet in the end

Hi There!! Hope everything is going great! Greetings from Guatemala, Great video!! Just one question, does this kit fits the mazda bt50 2022? Regards!

@VideoShowMeHow

Жыл бұрын

Hi, yes it does

@diegofigueroaarroyo2097

Жыл бұрын

Thanks a lot for your response! Also, the bonnet struts for the dmax, fits the bt 50?

@VideoShowMeHow

Жыл бұрын

@@diegofigueroaarroyo2097 yep

@axlnoc2809

Жыл бұрын

Que tal Diego, lo pediste crees que sea compatible para vehiculos de America ya que no se si varian los conectores por tener el timon del otro lado , estoy por pedir esto o el modulo para ventas con cierre a distancia para un D max

@espaun206

Жыл бұрын

@Diego Figueroa Arroyo tracelectronics tambien tiene este sistema yo les pregunte y me comentaron que el sistema de cierre si escompatible el mecanismo , pero de lo que no estaban seguros es si el arnes o cableado de este era compatible con los vehiculos con volante del lado izquierdo, es de preguntan en foros o en grupos de facook si ya istalaron este sistema en un D max o mazda con volante a la izquierda este sistema tambien les pregunte del modulo para ventanas y retrovisores y me cometaron que este si no es comparible por que el cabledo es directo y que estaban trabajando en una vercion para el lado izquierdo

This is a great add on, but i reckon that this should still be an add on and I'd prefer the factory sealed the tailgate.

Great Vid mate, they should have auto folding mirrors ex factory, any info if that's something you can cover?

the order i received had different part that equipped on the actuator and doesnt allow the use of a hard key at the same time. im wondering how come i didnt get the exact same as yours.

@VideoShowMeHow

Жыл бұрын

Yeah there appears to have been a design change

Great videos Adam....so when you use central locking on tailgate, does the tonnue cover stay locked/unlocked as i believe this is also a manual key lock ? Still waiting for my X-Terrain !!☹

@VideoShowMeHow

2 жыл бұрын

The roller shutter? Yes this is a separate key unfortunately. I usually just leave this locked as with the central locking mod on the tailgate you can still access for most stuff

@franklongley4899

2 жыл бұрын

@@VideoShowMeHow ok thanks,...poor design in these modern times eh....but thats what i thought. So yes easy to keep the cover locked, then just pull out any kit,...then close tailgate and central lock !!..all secure then.😁👍 Im also wanting to put a low profile roof platform on mine when i get it....any recomendations !! Cheers Frank

@VideoShowMeHow

2 жыл бұрын

@@franklongley4899 yep agree!

The tail gate lock should come from factory but another mod that should be in the car from factory is a heads up display giving your speed! So much easier to keep an eye on the speed and watch the road at the same time!

Hey Adam, just finished the install on my new bus. Loved the easy instructions. Wanting to know what your tip is for getting the grommet back on? Pretty simple to get off but trying to feed it back onto the plastic thing is proving a bit challenging. Even took it to my local Isuzu dealership and they couldn’t get it back on.

@tylerjones3875

2 жыл бұрын

Did just finish getting the grommet back on. Ended up pushing the white plastic off the firewall and putting (most of) the grommet back on that way. Still required a very skilful left handed approach and LOTS of time. 100% would NOT recommend pulling that grommet off. A HUGE pain in the arse. And I ended up siliconing the last 1/4 I couldn’t get back on.

@VideoShowMeHow

2 жыл бұрын

Hey mate thanks for the reminder. Yes, an absolute PITA. Had another crack just now.. turns out the white plastic bracket can come out, twist it 180 and you can see how it clips together. Jam a flat head in there and it clips apart for removal. I spent a good hour (maybe I'm just slow haha) on it and can't for the life of me work out how it is mean to be assembled. The bracket to me is obviously mean to clip on somehow after to loom would be fed through in factory assembly but buggers me how. The upside is it's dead easy without the white plastic bracket to just push the rubber grommet into the firewall hole (you know, like every-other-firewall-grommet-in-the-world!) so it seals up. Have left the white bracket out for the moment until I can build up the patience to give it another go. At least it's sealed I figure!

@tylerjones3875

2 жыл бұрын

@@VideoShowMeHow haha should’ve warned you not to take it off again. It’s honestly one of the worst grommets I’ve dealt with. Every other grommet just pops right back in as you said, but nope, not this one. A lot of patience and luck got mine mostly back to factory. Might have to take off the plastic housing if my rush job doesn’t hold up. Thanks for revisiting the pain with me though 😂 Hope you can get it back together again!

@VideoShowMeHow

2 жыл бұрын

Haha one day will muster the patience again. I'd honestly rather drill a hole next time 😁

@axlnoc2809

Жыл бұрын

What grommet do you mean at what minute does it come out???

Would have been awesome to have a 12V power source in the tub as standard 😁

@VideoShowMeHow

3 жыл бұрын

That would be cool

should have been included from factory , need one for our d max when we get it

does this also fit onto the mazda bt 50 2022...

@VideoShowMeHow

Жыл бұрын

I believe so yes, just confirm on their website

Hi Adam, is this the same installation with its sister mazda BT-50? Thanks in advance.

@VideoShowMeHow

3 жыл бұрын

Yep almost exactly the same 👍

@marklopes706

3 жыл бұрын

@@VideoShowMeHow thanks for all the informative “how to” videos mate, definitely going the same route but gradually. Will be getting my BT-50 next week👍🏼👍🏼More power to the channel bro.

@VideoShowMeHow

3 жыл бұрын

@@marklopes706 cheers mate!

Can it still be opened by key if a flat battery happens ?

@VideoShowMeHow

3 жыл бұрын

Yep the normal key still works fine 👍

Great vid! I now have central locking on my X-terrain too. One question though, how the hell did you get the rubber grommet in the engine bay back into its slot? I pulled mine out to make the slit for the loom, but buggered if I can get all four sides of the grommet back onto the white plastic backing that it clips into. Its so damned tight up in that corner and the main loom blocks access to the back corner of the grommet. Any tricks and tips?

@VideoShowMeHow

3 жыл бұрын

Hey hey nice one! Yes it's an absolute PITA. First time I had it off got it back on no probs didn't think anything of it. Round two however took FOREVER. From what I can work out you've got to try and Macguyver your hands in there, hold the bottom bit in place while stretching the top into place. I swear, if I have to take it off again I'm just going to Sikaflex to while thing :( Anyone else have any tips I'm also all ears!

@PaulTaylor79

3 жыл бұрын

@@VideoShowMeHow Thanks. Glad its not just me! I have seen some other vehicles where they suggest popping out the white clip, joining it all back together and then pushing it back into place. Might give that a shot on the weekend....

@VideoShowMeHow

3 жыл бұрын

@@PaulTaylor79 oh now that's an idea! Wonder if it could be pushed out from the inside?? That could be the go. Will give it a crack on the weekend also 👍👍

Morning mate, Thanks for you videos, they're a gem. I've just finished running loom, gave it a test and when locking and unlocking.... It's engaging the mechanism when unlocking and jamming when going to lock. Would you have any insights as to the issue? Ledgend Cheers Ben

@rosco3130000

2 жыл бұрын

All sorted mate, I had 3 bloody doors open which wasn't allowing it to engage. 👍 Keep these awesome videos coming please mate. 😊

@VideoShowMeHow

2 жыл бұрын

Hi Ben, do you mean working fine when unlocking and only when locking it jams?

@VideoShowMeHow

2 жыл бұрын

Ahhh, great news glad you got sorted 👍👍

Auto dimming rear vision mirror should have come factory

@VideoShowMeHow

3 жыл бұрын

I reckon!

Do you think I could run 6 x actuators off One of the doors? I have a Ute canopy

@VideoShowMeHow

2 жыл бұрын

As in six of these?

Hi can i know where can buy this tali lock for isuzu D MAX?

@VideoShowMeHow

2 жыл бұрын

Link in the description 👌

@kwansianglee1526

2 жыл бұрын

I come form Malaysian

Better without your device, if you give key fob to repairman person or anyone else, they can open your tailgate, because you gave them your key fob. Before, you could have locked your tailgate, because you kept key, and repair person had key fob (to start car and work on it).