Thanks for showing how to rebuild the caliper 👍🏽

Your Pullover rocks! 🤘

@tomwun3683

10 ай бұрын

The other shirts too! 😁

Yo! You look like the bank robber in north Hollywood in 97 🤣🤣🤣

What size socket are the torx head bolts to seperate calipers?

Hahah in late too the video but just got too say first off.....I fuck with your shirt selection very hard💪🏾 Secondly shit came out so clean!! Doing mine currently just need too get rotors and remove the rears for paint also👏🏾

@RotaryDaddy

3 жыл бұрын

I don't think there's a shirt in my closet that isn't band merch 😂 Hell yeah bro! Get those things on, I wanna see em! 🤘🏼🤘🏼

Think an 18 inch wheel will fit it without spacers?

@RotaryDaddy

3 жыл бұрын

All depends on the wheel. Make sure to find one that is advertised as having good brake clearance. My cosmis racing wheels i got fit it perfectly with no spacer

I know this videos a year old but you could just sand that rust or brake residue off your rims. Wire brush will gouge the shit out them though so don't go that route. I don't think lacquer thinner would work but who knows? Anyways brakes look good! So you didn't have to buy the kit and just bought the adapters then modded everything else?

@RotaryDaddy

2 жыл бұрын

It was pretty deep seemed like I would have had to sand it off but they were just stock wheels so I wasn't too worried. There's not really any kit's available other than the figs adapter kit. Once you have that everything else is just ls400 stuff and nothing really requires modification other than installing the adapters into the calipers

I have a lexus rx350 2013. Do you think that LS400 calipers fit in my car. Mine are stack calipers with 2 piston.

@RotaryDaddy

3 жыл бұрын

That's kind of a tough question cause I have no idea if the caliper mounts and hub offset are the same on the rx350 and the is300. Can't really help you with that bro.

Questions: Will 17's fit? Also what does the weight feel like has it been compromised?

@RotaryDaddy

4 жыл бұрын

I'm still running stock 17s with 25mm spacers. You have to run spacers with stock wheels at least 15mm to clear the brakes but aftermarket wheels it all depends on the curvature of the inside of the wheel. As far as brake feel I'm gonna be honest I don't track my car so I don't usually get the brakes going that hard. That being said I pretty much don't feel a difference between these and stock as far as pedal feel

Do i need those bolt adjusters for it to fit the lexus gs300?

@RotaryDaddy

3 жыл бұрын

I believe so but I haven't done too much research on that swap

Do u know if these callipers can work on a jzx90 or jzx100

Hey dude I watched your old video of the water pump change. I was wondering where you got all the gaskets for it. The two that go on that pipe

@RotaryDaddy

4 жыл бұрын

I saw that I replied on your first comment haha but the main water pump gaskets came with the water pump. The o rings from the water outlet I bought at a toyota dealership. I included part numbers in the description of the video so you know exactly what to get 🤘🏼

so just how much better is the braking with the ls400 calipers?

@RotaryDaddy

3 жыл бұрын

Honestly I daily this thing and it doesn't see any sort of track use so I couldn't really speak on performance gains. It'll still lock up the wheels but without grippier tires and extended use you probably won't notice a difference

Hey bro i just did this swap also, and had a question. Do the bottom part of your brake pads stick above the rotor a tad? Top part of caliper is tight maybe few mms away from rotor. And if so do you get uneven pad wear? I knoticed mine do and am trying to find out if this is common problem it is not talked about and figs says its hard to get them perfectly aligned.

@RotaryDaddy

2 жыл бұрын

Mine do not, but I have had a few people tell me they had trouble with a similar issue. I think it's all about making sure the spacers are lined up perfectly before you press em in which is why I installed mine with only the back side of the caliper to align it. Yes, pretty common issue but can be fixed

@shaner6838

2 жыл бұрын

@@RotaryDaddy thanks for replying bro i did it like you did with only half the caliper mounted i went off the pics from the tt calipers but maybe have to angle them more like you did. Did you test fit the pad before pressing in the adapters?

I’m thinking of doing this swap. Is there any point in doing all four corners vs just the front? Just kind of an OCD thing for me having the front different from the back.

Hi. I bought. This 2002 Lexus 300 is. For my son. And needs work. Wondering. If you live in california or you have a shop. So I can stop by. And. Check it out

Hey man, I’m rebuilding my calipers and have every other part sourced except for the anti rattle clips that are held in place with a small Allen head bolt. I’m wonder do you know where I could get them as two of mine are broken, can’t seem to find any online.

@RotaryDaddy

4 жыл бұрын

I've actually never seen those sold separately. Mine came installed in the calipers and I never removed them so I'm not sure man. Good luck finding them tho!

@conorbrowne4848

4 жыл бұрын

Low Octane Motorsports Thanks for the reply, I’ll see what I can find 👍

Anyway you can throw some links to all the extra parts you need to do the swap

@RotaryDaddy

4 жыл бұрын

I'll get em put in the description by about 2 o'clock!

@RotaryDaddy

4 жыл бұрын

Links are up!

@gavinolan5011

4 жыл бұрын

What a g thanks

Nooooice! Gonna have to do this myself! Did you use IS300 stainless brake lines?

@RotaryDaddy

3 жыл бұрын

Yup is300 lines all around!

@shizukesajdm

3 жыл бұрын

@@RotaryDaddy Thanks mate! :) Coilovers for you soon?

@RotaryDaddy

3 жыл бұрын

@@shizukesajdm you're a bit behind it sounds like lol I'm buying my second set for this car tomorrow but don't tell anybody 🤫🤫😂

@shizukesajdm

3 жыл бұрын

@@RotaryDaddy Not good ones though :D BCs now then I hope!

@RotaryDaddy

3 жыл бұрын

@@shizukesajdm not bc's I think imma switch it up a bit 😎

Did you still use the stock wheel studs?

@RotaryDaddy

3 жыл бұрын

Yup! Spacers I got were the type with studs pressed into them so there was no issue!

@LuisFlores-eo6mh

3 жыл бұрын

Irvin Ortega thank you and sorry I meant to ask that question on the video where you installed the wheels

@RotaryDaddy

3 жыл бұрын

@@LuisFlores-eo6mh lol same thing! Haven't upgraded studs at all 🤘🏼

@LuisFlores-eo6mh

3 жыл бұрын

Irvin Ortega sweet thanks I’m going to buy my wheels

@LuisFlores-eo6mh

3 жыл бұрын

Irvin Ortega with the same exact specs as you expect with a 35 offset would that still look good?

You will slow down the car faster and slow down the acceleration from more sprung weight from breakeven rotor

@RotaryDaddy

4 жыл бұрын

That's what turbos are for ;)

@rondhole

4 жыл бұрын

@@RotaryDaddy yes, even faster without that stupid upgrade. ups downgrade.

Chemical guys Decon, for the brake dust

@RotaryDaddy

4 жыл бұрын

I'll have to try that!

Do you have a link to the wheel spacers you used?

@RotaryDaddy

4 жыл бұрын

www.amazon.com/dp/B00A7I380O/ref=cm_sw_r_fm_apa_i_6bzrEb6Y3VPFH

@RotaryDaddy

4 жыл бұрын

Those are the exact ones I'm running! 🤘🏼🤘🏼

@kyledenbeste9907

4 жыл бұрын

Awesome. Thanks!

Did u have to buy rca spacers so it spaces your tie rod?

@RotaryDaddy

4 жыл бұрын

Rca's are included in the figs kit! 🤘🏼🤘🏼

@Mikejose2012

4 жыл бұрын

@@RotaryDaddy O.ok.thought u didn't install those.i dont see in video

@RotaryDaddy

4 жыл бұрын

Ah yeah they're in there! 16:12

@joshuaspeights8578

3 жыл бұрын

I believe it was RCA or use GS tie rods

Wanna do mine? 🤣

@RotaryDaddy

3 жыл бұрын

Get parts and I could give you a hand 🤘🏼

I did thiis