Hearing you talk about the progress with your shoulder made my day! Love you all...❤❤❤ Lieutenant Bradley

@BuckinBillyRaySmith

Жыл бұрын

comin round

Every little thing taken to absolutely to perfection. Absolut legend. Thank you sir for sharing your secrets with us.

Thanks buckin! Your videos have taught me so much about saws. I freaking love em

@BuckinBillyRaySmith

Жыл бұрын

Good stuff

Tanks for putting time to do does super cool effects!

Harvey Has 'Er Dialed In Eh ! Great Job, Buckin' Love The Muffler. Prayers For All Here Friends ! ATB T God Bless

Good to see you out there, doing what you do, always leveling with the world. Be safe, God Bless Buck’n. 👍

@BuckinBillyRaySmith

Жыл бұрын

Thx ol boy

Great video Buckin. Love that saw and love that pipe. Glad you're feeling better.

@BuckinBillyRaySmith

Жыл бұрын

thx

Amen on Harvey’s saws craftsmanship at it’s best. 👋👋👋

Hey Buckin! Great video as always! Thanks to you Ripsaw sold one more 500i! One heck of suspense for the next 2 more weeks. Thanks again buddy 👍

I see your making the saw and that long bar do the hard yards for you Buckin. Little effort from you, letting the shoulder heal. That’s smart. The BBR pipe from Mark is a beauty, looks great, sounds real nice on your Ironhorse saw.

THATS AWESOME YOU HAVE ALLOWED YOURSELF TO PUT A HAND OUT BUT NOW IT IS TIME TO SHARE WHY THE CHANNEL NEEDS THE SUPPORT TO SUPPORT

Perfect time to post your video! Just got on my lunch break!!!

@BuckinBillyRaySmith

Жыл бұрын

Awesome

Another great video buckin thanks for all the advice

@BuckinBillyRaySmith

Жыл бұрын

welcome

I Love your gear drive ironhorse saws, Harvey is legend!!!!! Love ya to Buckin!!!

@BuckinBillyRaySmith

Жыл бұрын

Love ya buddy

That saw sounds wicked awesome....love the tone with that pipe

That saw reminds me of the days when the 500 2 strokes ruled the MX tracks

@gerrytrader4756

Жыл бұрын

And the tz two strokes ruled the road corses

@marcoantonio078

Жыл бұрын

@@gerrytrader4756 I had an RD 350. It was monster. I have an old McCulloch, my dad says it's like holding a yz250 in your hands. I can't disagree with him. The power these little engines make is mind-blowing

What a glorious day 😅Some good sunshine and fresh air that shoulder be firing just like that chainsaw. HaHa. Blessings for you my friend.

Good morning Buckin, good to see you busy!!!

@BuckinBillyRaySmith

Жыл бұрын

Kool

That’s one bad azz saw buckin

Buckin that saw with that pipe is a absolute weapon 👍 Johno Darwin NT

I love it when i find a butter tree! Doesn’t happen often but it’s fun when I do , makes me feel like I really know my stuff 😂

@BuckinBillyRaySmith

Жыл бұрын

Lots of folks experience the same when their filin’ needs attention 😂

@BuckinBillyRaySmith

Жыл бұрын

Just file for yer wood brother

@user-jr3ht1hc2e

Жыл бұрын

Who makes the BBR mufflers

Saw sounds and runs great. Another win for the iron horse

Glad to see your shoulder getting better.

@BuckinBillyRaySmith

Жыл бұрын

thank you

One could only dream of owning a saw like that … what a weapon ❤️✊🏻

@marko1025

Жыл бұрын

That saw chain combination is certainly optimal . The whole package is so sweet . Happy for ya brother !✊🏻🇦🇺

@patlucas8227

7 ай бұрын

its not a maclaren F1 bro...go and buy one.

Let her eat.. that’s right. Get some Great sound Stay safe Buckin.

Gday Buckin' I absolutely love the intro riff my man 👍You look well, hope life is treating you well my friend.

@BuckinBillyRaySmith

Жыл бұрын

Thx friend, we got luck with the music I was unloading saws after work one day and heard Travis upstairs on the keys and flew up there and sat on the tubs , thx

Love cutting soft wood, were im at theres a wood called beach, u can see the bar flex from torque of saw ripping through it, That pipe sounds awesome

Proud to be a soldier of kindness!

Cant wait my 372 low back should be here friday cant wait also picked up a makita 6401 on sat. Your an inspiration Buckin. BTW that puts my right around 40ish powersaws lol

@marcoantonio078

Жыл бұрын

Makita/dolmar are fantastic saws. Had one a few years ago. I picked up an old McCulloch last week. It's a monster and hardly see them over here I. The UK.

Mornin Buckin

@BuckinBillyRaySmith

Жыл бұрын

Mornin

I am ready for one of those BBR pipes for my 372

❤❤great runin saw an love a good pipe❤❤

I don’t know if anyone else can hear it. Does it sound like the saw needs a touch more fuel on the low jet? I am only listening through my phone, which probably isn’t anything to go by.

Looks like you have a pipe that works on the 86er! Nice!

Ngl buckin this one in particular reminds me of a 250 smoker pullin a hole shot 🤌🏾🤌🏾👌🏾👌🏾👌🏾 like your throttle chop in the beginning to raise rpm’s and almost gradually dump the clutch like on the line to when you get on the pipe ✊🏾✊🏾✊🏾😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😶‍🌫️😮‍💨😮‍💨😮‍💨🤝🏾🤝🏾🤝🏾

Who ever this mark guy is ...boy he can weld

@BuckinBillyRaySmith

Жыл бұрын

oh yeah

@cameronjanda4880

Жыл бұрын

Yes sir 👍

@Bc-mj9hg

Жыл бұрын

@@BuckinBillyRaySmith can you tell us if he’ll be selling production pipes?

Good morning buckin hope your doing well and have a blessed day 🙏

@BuckinBillyRaySmith

Жыл бұрын

Thx

Morning Bucking army it’s a beautiful morning

@BuckinBillyRaySmith

Жыл бұрын

Happy birthday

@critterg8493

Жыл бұрын

@@BuckinBillyRaySmith thanks friend

What would be a good mod for a stihl ms462c?

Sounds good.

Love your videos who makes the BBR? I'd love to try one out on my 500i

Big Hello from Texas

Now I want a 2 cyl. .That stereo is great.

Cool Hand Luke! 😁

Wow Pavarotti live must be something fantastic!

Good video

Just wanted to comment to thank you for your videos and tips, always got lower back pain from bucking firewood, but after getting a 30in bar for my saw I did a whole weekends worth of cutting and still haven't felt a bit of pain. Thank you!

@BuckinBillyRaySmith

Жыл бұрын

It all starts with the filing and once you get good long bar becomes second nature . Well done brother

@jogginnoggins9918

Жыл бұрын

@@BuckinBillyRaySmith My filing still needs some work, but I fixed up my dad's old 050AV and it's running beautifully, so I'll have a lot of opportunity to improve my filing skill in the future.

Hey Buckin'.... why do you always pull the starter cord out when you turn a saw out?

morning Bucking hope you are having a great day so far

@BuckinBillyRaySmith

Жыл бұрын

Sun tanning lol

@AaronTheViking250

Жыл бұрын

@Buckin' Billy Ray Smith right on bucking, i was going to take on a big tree job today, but i just saw her pictures of the situation. It's a huge walnut tree with two huge leaders really close to the house huge crowns. and i didn't feel comfortable taking that one on myself way to many Hazzards

Hey buckin I just picked up a mcculloch pro mac 1000 and the flywheel fins are all broke off do you happen to know anywhere where I could get one I live in elmira ny and I can't find anything online or is there an alternative flywheel from another promac that will fit it

@BuckinBillyRaySmith

Жыл бұрын

nit sure buddy

That pipe is nice! Do they make them for a ms462, and a 562xt ? If so please give me a link where I can get those

I need this pipe or a good pipe for my 372xp

90° down here in Orygun yesterday.

Unicorn chainsaw instruments. 1,2,3,Eric

Glad ur healing

A little bit confused, if rakers are filed right saw will act like yours in wood. If they are wrong will saw jump on log ? Thanks.

@BuckinBillyRaySmith

Жыл бұрын

it will act like a jack hammer

@davidswaboda4609

Жыл бұрын

Thanks

This is nothing against Billy Ray and I know this has nothing to do with this video, but I put in a order for a pair of Nicks boots and told them I wanted the big eyelets at the top. They emailed me back and said they would have to do a collaboration boot with Buckin Billy Ray to put those eyelets in there and that his was a one a kind “influencer” pair made just for him. That’s kind of a slap in the face to me. It’s not good enough to be a hard working individual paying hard earned money for “custom” boots but can’t get a simple option like that because I’m not an “Influencer” with a following!

@itsfeltzzz1841

8 ай бұрын

That’s ass, Pasquales in toledo ohio is a small boot repair place and does it for 2$ a eyelet and will have it done in less then 10 min, they are the place, it’s unfortunate they aren’t bigger

@clayjones1933

8 ай бұрын

@@itsfeltzzz1841 Yea, Nicks call themselves a custom boot shop but only gives you a few options to choose from.

@maddawgnoll

8 ай бұрын

You can get the eyelets and setters in a kit from places like hobby lobby. Just do it yourself if they're gonna be prude about it. That's bs and shouldn't even be an issue with a company like theirs.

Do you live in Tofino or Nanaimo ?..l've visited both places when on vacation at Vancouver Island..👍❤️

Hey Billy how is Harvey feeling? Did the ablation help?

When is that pipe in production! lol

That saw should be impressive. Where I am I would be cutting that wood with a 50cc 18" bar. It is soft wood. No real need for a big 80-90cc saw with long bar cutting small wood. Just me. But I love your felling videos. I learn alot from watching those. TY

@BuckinBillyRaySmith

Жыл бұрын

I perfer to stand up when i work, I could run an 18 bar for about 30 seconds. Glad the vids have helped friend . thx

I’ve watched a bunch of your vids and was wondering if I can ask a dumb question. I’ve been a sawyer for brushing contracts and I’ve started to file my rakers down below the teeth and was wondering if that’s suitable for cutting through hardwood that’s 1” to 12” in diameter. Some of the guys are still faster than me at cutting. We’re always competitive out in the bush and always like to show off our production to our clients. Wish I could learn more faster. Such as rakers and angles of teeth. So forth.

I need a pipe like that for my saw. Yours sounds like a hotrod!!!

BE KIND!

Where can I get a pipe ?

Amateur chainsaw user here. What is the function of the pipe(s) ? Thnx…

HOW HARDS THAT WOOD THO WE HAVE WOOD IN OZ THAT IS THAT HARD SPARKS FLY OFF OF THE CHAIN.

@BuckinBillyRaySmith

Жыл бұрын

that wood be rocks yer cuttin

@juliomcdermott4696

Жыл бұрын

​@@BuckinBillyRaySmithahem, thats our pines n softwoods like westcoast made a Florida video on. If our hardwoods were any tougher, they'd rust. Everywhere has their hard stuff so at the end of the day...."its all in the filing" (saw at night here, you WILL see sparks. And it will blow your mind.)

@rodobrien3488

Жыл бұрын

@@BuckinBillyRaySmith HOW DO ROCKS GET INTO 3 INCHES DEEP INTO THE TOP OF A2 FOOT DIAMITER LOG?

@westcoast8562

Жыл бұрын

@@rodobrien3488 YOU MAKE THE VIDEO RODNIE

@shannonhelmers7373

Жыл бұрын

Our wood Down Under is hard for sure! But sparks?, Buckins right, that is our even harder Rocks haha.

Ahwoooo get one 👍

how much does it cost for husky 572xp

i used to be worried about kickback a lot until i got a chain that’s like anti-kickback with them extra rakers. after that i understood why foresters and woodsmen like rapid cut chains better 😑😑😑 they’re so annoying to file, never again. i’d rather use rapid cuts and be more careful after all that

Ironhorse is the best. Salt of the earth and someday we're gonna get together and do some singing with his wife. Apparently she sings some great harmony.

Saw in the wood , stick on the ice and rubber on the road . West coast logger! 😮

What pipe is that? Where can I get one

@wayongrahamjr6120

Жыл бұрын

X2

@2Aces

Жыл бұрын

@@wayongrahamjr6120 ?

@wayongrahamjr6120

Жыл бұрын

I want to know where to get pipe also

I'm 63 and a certified small engine tech, I make my own parts. My stock CS 310 will cold start 1 pull.

I run a old 288

I have a brand new stihl 661c and every time I turn it on it’s left side it acts as if it runs out of gas and dies but will run every other way, cannot figure it out

@BuckinBillyRaySmith

Жыл бұрын

it might be the fuel line inside the tank in a weird place

@soundman423

Жыл бұрын

@@BuckinBillyRaySmith I’ll drain it out and mess around with and try that out, thank ya much buckin

hello, you are very good! you are the lord of the chainsaws.... you are my myth!!!

Nobody KNOWS saws & motorcycles like Harvey the "Ironhorse...!"

@BuckinBillyRaySmith

Жыл бұрын

He is well versed

👍👍

Sweet cherry pie that cuts😂

👍👍✊

Nobody ever mentions: 3 THINGS--- 1&2 LONGEVITY, FUEL CONSUMPTION! Not per hour, but gpw-only fair way, IE: a test with a tuned saw vs. STOCK saw, MEASURING the amount of wood cut to the amount fuel used to time between re-ring & time before re- builds. FYI, - An 80cc motocross bike can make between 15 HP - 18HP!! maybe more but I'M pretty sure it would not last nearly as long as a STOCK chainsaw engine. Comments??? Please! So naturally, the question is- with the state of the art metallurgy and engineering- where do mods move the bar between engineered longevity VS power? Long term test needed! COMMENTS? AND... 3) . IF: You were to cut 100 rounds in a day, and saved 2seconds per round, thats only 3.3 minutes. If barely 4 seconds each, thats 6 minutes in a DAY. Now- SATISFACTION from running a perfectly suped up saw, CAN'T BE MEASURED!! And holds lots of joy! But all the other stuff.... CAN BE. Please share your thoughts, i wanna know.

Little lean on the low circuit too eh Buckin !

@BuckinBillyRaySmith

Жыл бұрын

preference..., know why?

@shannonhelmers7373

Жыл бұрын

Clean Rev Up I would imagine!

@Powersawjunky

Жыл бұрын

@@BuckinBillyRaySmith i honestly can’t say I do! That’s why I watch your videos brother! To learn!!

Buckin ray.what saw is that?...😢

Skookum. Good chat. Cya.

@BuckinBillyRaySmith

Жыл бұрын

love ya

Got a 455?

just bought a barely used 372xp for $800. amazing saw

Cracks me up guys cutting softwood and acting like their saw cuts lol! Cut hardwood and your saw won't be looking like cutting like butter!

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌🌍🌍🌍🌎🌎🌎🌏🌏🌏

Mccullochmini mack top handle is it worth it to buy?

I changed from Via Sat, to STAR LINK best move ever. You should too. DitectTV is the next to leave my home.

Buckn i have a 365 special 2000 model," i would love to have 1 of those header pipe" already set up to adjust the low or high side on carb," hit me up in my email

@BuckinBillyRaySmith

Жыл бұрын

lol.. this was a gift friend .