Common question: Numerical IPG or IPG v5? Numerical IPG is the one i showed in the video, which has only 3 settings but is faster to change. IPG v5 is the old one where you screw it in. You have more potential settings, but it takes longer to change springs and change settings. I personally think the Numerical IPG settings are good enough, so I'd go with numerical for the convenience.

@pablo9021

5 жыл бұрын

Numerical 🐐

@JPerm

5 жыл бұрын

yes gts3m

@teamspirit6400

5 жыл бұрын

If it is the numerical ipg, then how did you get the other ges nuts?

@leobozkir5425

5 жыл бұрын

I thought yellow magnets were medium or is it

@shamux4043

5 жыл бұрын

Num IPG. By the way, if a Youcuber named N Perm popped into existence, would everybody hate him?

I love how there is a tutorial how to solve it in the package. As if someone that pays 60 dollars for a speed cube doesn’t know how to solve a 3x3

@vikingsloth3378

5 жыл бұрын

In my class lots of people cube, so this one beginner who was rich just bought a ganx and a weilong wrm and he didn't even know how to solve one :p

@ImChazo

4 жыл бұрын

Flame Thrower that’s not so much being rich, that’s just being cavalier with your finances.

@wilsonli8478

4 жыл бұрын

im buying my frient this cube and he dosen't know how to solve one

@sylv512

4 жыл бұрын

@@vikingsloth3378 lmao rich people are stupid

@dralethedragon2521

4 жыл бұрын

My friend's first cube is a high end gan

New event: Gan 356 X setup

@JPerm

5 жыл бұрын

I might have uwr cause I don't think anyone is timing themselves but I bet people can sub-20 the magnets with practice

@austinchuong4686

5 жыл бұрын

@@JPerm its called WB now, isnt it ;)

@ianr.1225

5 жыл бұрын

I suppose we need something to replace Feet. ;)

@ishtarxdd

5 жыл бұрын

Thats a big advantage: a company needs to make a 356x for beginners in the event

@iimagmaboii9890

5 жыл бұрын

@@austinchuong4686 lmao

Me: learns Chinese Parents: thinking I’m really smart Me: learns it to read instructions

@damrzr

4 жыл бұрын

big brain

@vedsawant2185

4 жыл бұрын

Good thinking

@seansonia1016

4 жыл бұрын

chinese is my mother tongue…

@vuduraids8382

4 жыл бұрын

#bigbrain

@noobishace2411

4 жыл бұрын

Technically, the instructions were not in Chinese, it was in Japanese... Give me my woosh.

I left cubing for 2 years and they're already using freaking magnets and abolished the screws... Back in my day we had to actually screw the cube to tune it and had to carefully lube to avoid overshooting XD.

@AdityaSingh-yo1qb

5 жыл бұрын

I wasted so much vasline for cubing and mastrubation in my old days😂

@SkiNNyPoNNy

5 жыл бұрын

Aditya Singh that's literally like the only things it should be used for

@charlie_mario6292

4 жыл бұрын

sAvAƨ・サヴァス don’t put Vaseline in a Rubik’s cube. It slows it down.

@jj_g4m3r

4 жыл бұрын

WalnutTime some people like to slow it down to make it controllable

@The_NSeven

4 жыл бұрын

Vaseline breaks down the plastic, so it's kinda toxic the cube

I have no idea why this is in my recommend tab

@Jayden-yh1li

5 жыл бұрын

you are the chosen one... TO BE A CUBER!!!! or the youtube algorithm is wack who knows

@xlegacy5174

5 жыл бұрын

Non-Cuber?

@twistiicuber1055

5 жыл бұрын

Lmao

@Tutty628

5 жыл бұрын

Likewise

@tuono2914

5 жыл бұрын

It’s because you’ll watch it

Well it's better than the 1000$ stand

@darshikapatwardhan5631

3 жыл бұрын

😂😂

@hmmhmm5431

3 жыл бұрын

Under rated comment...

@fabiandinatra6957

3 жыл бұрын

@@hmmhmm5431 You made me find my old comment haha.

@kavithasunilkumarms7423

3 жыл бұрын

Is this the best KZread comment or what??🤣🤣🤣

@jachympantoflicek2349

3 жыл бұрын

Dang dat savage

5:27 his cube made the scs logo on an scs mat lol

@vvs3526

4 жыл бұрын

😳

@akashwalavalkar7313

4 жыл бұрын

@Cubing Is L͟i͟f͟e͟ you are stupid

@logzilla659

4 жыл бұрын

@@akashwalavalkar7313 shut up

@logzilla659

4 жыл бұрын

@Cubing Is L͟i͟f͟e͟ at that time if you look at the mat theres a pic of a cube with the orange face facing you and a side slightly turned, and when jperm finished his solve, his cube matches the picture on his mat

@lychops9697

3 жыл бұрын

Logzilla6 great explanation my man

I LOVE what GAN is doing with customization.This is the future of cubing. Great content as always Dylan.

@JPerm

5 жыл бұрын

thanks! I'll take credit for gan's innovations

@kyran6409

5 жыл бұрын

Ily channel J Perm, you got me into cubing and now I have a valk 2 m and a gan 356 x

@Cutechickensinagarden

9 ай бұрын

@@JPerm did you quit KZread? 😭😭😭😭

Clothes are 20% off til the end of December! Including Cubing Mom and Dad shirts: teespring.com/stores/jperm?pr=XMAS2018

@prakhartibrewal9886

5 жыл бұрын

I used cube like 3-4 years ago and now I want to get back...I tried my Moyu Weilong v1 and was able to solve in about 25 sec...which cube should I buy JPerm?

@JPerm

5 жыл бұрын

I recommend mf3rs2m since it's the cheapest good magnetic cube!

@Twitchte

5 жыл бұрын

J Perm, I know that you are sponsored by speedcubeshop, but do you know if you can still order from thecubicle.us if the items aren't available from thecubicle.com. If anyone else has an answer please respond.

@brucesk6240

5 жыл бұрын

@@Twitchte im pretty sure you can

@brucesk6240

5 жыл бұрын

@@JPerm mgc, gts2m, little magic m are all good for cheap

I think my mom bought me this. This morning I was talking to her about it and she pulled t up on amazon to look at what made it special and I feel like she might’ve bought it. I’ll update later Edit: she did. Bloody Jesus it’s awesome. My PB literally dropped SIX SECONDS a week and a half after I got it.

@kban641

4 жыл бұрын

Ooo

@TTCBlaze

4 жыл бұрын

lol every 10 bucks is a second off

@Khanaltai

4 жыл бұрын

WalnutTime you bought it from From Amazon??!!

@jeklee7586

4 жыл бұрын

Wow. No matter how hard i try to convince my parents they never barge

@bruce4139

4 жыл бұрын

That's insane

Only real cubers time themselves changing stuff on their cubes

@charlie_mario6292

4 жыл бұрын

Caiel M. r/gatekeeping

@dylanfagle3409

4 жыл бұрын

@@charlie_mario6292 r/ihavereddit

@charlie_mario6292

4 жыл бұрын

Dylan Fagle ironic, isn’t it?

@Serkoid

3 жыл бұрын

@@charlie_mario6292 lol

Idk why I'm watching this I've never solved a rubik's cube in my life

@repcac3199

5 жыл бұрын

Same

@yperm7627

5 жыл бұрын

Here is u guys’ chances Let’s be cubers

@joshbelt6866

5 жыл бұрын

I've solved it one time only. But I can solve a 2x2 very easily

@-_carl6_-956

5 жыл бұрын

Do Rian learn how to spell

@neljetski1073

5 жыл бұрын

Do Rian you spelled rubiks wrong (i think)

I got this as a gift, so I didn't have to spend the money. I don't think I would have wanted to put 60 of my own dollars into it, but boy is this thing amazing. Never even going to consider buying a different cube now.

@MuhammadHaris-uv4nr

5 жыл бұрын

Wow good for you

@SyreMahas

5 жыл бұрын

I bought it myself with my own money and personally I love the cube I’m still trying to get it dialed in to where I like it but I love the gan I just wish I’d have known that stickerless is now legal in competition before getting stickered....

@aaronprice4450

5 жыл бұрын

Ben Swanson I got it for Christmas so I’m happy

@danishdanial5596

5 жыл бұрын

@@SyreMahas boy how long have you been out out the cubing community

@SyreMahas

5 жыл бұрын

Danish Danial I was in 8th grade and I’m 26 now lol so 12 years

I believe changing cube's spring should be a competitivs sports.

0:24 When you got in trouble cuz of bad grades.

@RedOctober_

3 жыл бұрын

XD

@Cuberang

3 жыл бұрын

Lol

@cuberynth3079

3 жыл бұрын

Lmao

When there are more possible permutations on how to set up the cube than permutations on the cube itself. :D

@jijwiltrijst8919

5 жыл бұрын

ProfDrDrNoname WAIT BITCH YO SERIOUS?

@gamingwithgabe6156

5 жыл бұрын

@@jijwiltrijst8919 r/wooosh

@diamboy

5 жыл бұрын

3 options for magnets * 4 types of magnet * 4 springs * 6 centers = 288 options

@TheMuffinMan

5 жыл бұрын

@@diamboy Fyi, you're completely wrong on your calculations. Calculation permutations use factorials, not multiplication. It's really basic math.

@diamboy

5 жыл бұрын

The Muffin Man I ignore irregularities 18 spring choices for 1st center 17 spring choices for 2nd center ... 18*17*16*15*14*13=13361080 spring choices x 2 for magnets(dunno how magnets work) ____________________________________ 26722160 choice on how to setup your cube

I agree that if I had to move on from the GTS3M that I’d go with the GAN X. Why mess with perfection in the meantime 😎

@MegaMinecraftNinja1

5 жыл бұрын

Because divine perfection.

@starzhisoka6346

5 жыл бұрын

Maybe ill get it if i win ur giveaway :3 -ayoub bouchkara

@han-huo

4 жыл бұрын

Cube solve hero????!! Geez wuut?

@markbu5257

4 жыл бұрын

I liked the comment so that it’s not 69 likes anymore. Your welcome

@dylanfagle3409

4 жыл бұрын

@@markbu5257 You're insane

The most depressing moment of Christmas is when a family member tells you the cube hasn’t arrived yet. And this happens on Christmas DAY

My cube progression: original Rubik's with no spring or corner cutting (hell cube) to the Rubik's/GAN collaboration, to the 356x. Each step was pure bliss.

I like how he talks like most of us are gonna buy but secretly we just watch for him and don’t have enough money

@ary0x969

3 жыл бұрын

For see gan 356 x v2 kzread.info/dash/bejne/gJirz89sXafLpbA.html

"If I had to switch, this is definitely the cube I would switch to" *picked the gts2m as his new main* *ok now its the wr*

@JavierMorales-ky1yy

5 жыл бұрын

liveraiddd if he had to switch He didnt switch yet

@elthpiano

4 жыл бұрын

RadioYT ??? He mained the gts3m and said that if he had to switch he would swap to the Gan X but then he swapped to the gts2m

@misswolf4951

4 жыл бұрын

Listen to 5:21

@wilsonli8478

4 жыл бұрын

he uses the gan 356 xs now

Thx for help with choosing a cube! Your vids are really, really good and informating. Keep it up dude!

wow this suddenly popped up in my recommended. i havent cubed in 6+ years and comparing how this cube works to when i had to take it apart to mess with the tightness of the screws and then lubing it with special sauce brings back hella memories

The mechanical keyboard of Rubik’s cubes...

@twistiicuber1055

5 жыл бұрын

Lol

@tyler94302

4 жыл бұрын

Eh sorta

@MrKrypt

4 жыл бұрын

Call them 3x3s not rubiks cubes

@adilplays2312

4 жыл бұрын

@treelon musk yep..

@OhWordFr

4 жыл бұрын

Mr Krypt Shut up pussy

I think for high end speedcubers (I am certainly not one of them), cubes like this make a great deal of sense. I completely understand why someone would want one of these cubes, and deep down inside, I probably want one of them as well. Gonna have to hang with my Yuxin Little Magic.

Just got the 365 x today and I love it! Thanks so much for the video it was very helpful in figuring out what the tightest setting was.

@thomasyu254

5 жыл бұрын

Cubing Tutorials 356* lol sorry i couldn’t not point it out

The GAN 356 X is incredible in my opinion. I very recently bought one from SCS with Cosmic set-up & it's the greatest puzzle I've ever touched. Buttery smooth, fast and super stable with a lovely blocky feeling. All of the different options for magnets & springs help you to find a feeling that suits you, which is nice because you wouldn't want to spend 60 bucks on a puzzle that didn't end up feeling right. Plus, it's pretty darn quiet. My GTS3M has been collecting dust since I got the 356, I prefer the extra stability and smoothness of the 356 over the raw speed of the 3M; it just suits me better. For the curious, I'm using the strongest options for springs & magnets. Overall, I think the GAN 365 X is definitely worth the money.

I dont even own a rubix cube or intend to but this seemed interesting

@cameronberens4801

5 жыл бұрын

Magma Fang this is literally exactly what I was thinking

@Redkarmaa

5 жыл бұрын

RUBIX

@Zenkor11

5 жыл бұрын

might as well call it Roblox

@ChepFrosty

5 жыл бұрын

Okay buy a cube and get addicted like all of us

@ankithmahesh1182

5 жыл бұрын

@@ChepFrosty lol

This seems like the perfect cube for me. I have a problem with tensioning and how precise it is and the Gan 356 X makes this so much easier. And say I buy a cube and don't like the magnets, I can change it whenever I want. I'm all for customizing anything and this cube lets that happen. Thanks, GAN, you never fail to disappoint.

@yiprogrammer

2 жыл бұрын

I have trouble understanding "never fail to disappoint" 🤔️

@karolissad.4270

2 жыл бұрын

@@yiprogrammer He meant that gan never fails to dissapoint us. Meaning it always surpasses expectations

The time-lapse magnet changing sound is soooo satisfying

3:59 when he puts them magnets in it sounds sooooo good

Although I don't have this cube, it's OK for me to watch the entire video of yours because not even a single part I noticed that I was bored. It was just so interesting!!!!!!!!!!!

Just got this cube it is really amazing and i love how smooth it is to turn. The customistaion is great however once you have the setup you want, it becomes pointless. I would recomend this to a person who dosent mind spending £50 on a cube and wants a really nice cube.

Will the gan robot work with gan 356 xs if it does so how will I charge the centre pieces of the cube because the charge is not showed

J perm can u help me i'm planning to buy my first gan 356x what do u think i will get the numerical ipg or ipg v5 i like more thighter cube because i always get lockup when using flexible cube

I read the title "IS THE GAN 356 X WORTH $60?" and said "No, it's worth 61.99$!!!'

@AwesometownUSA

5 жыл бұрын

more like $69! hahaha get it? ‘cause “69”

@zacharyschmid1446

5 жыл бұрын

Steven Gordon hahah omg your so funny help I’m dying

@AwesometownUSA

5 жыл бұрын

Zachary Schmid right?? also, it’s spelled “ur”

@Oracle24_

5 жыл бұрын

BOI IT'S WORTH 60.01 GET YOUR FACTS RIGHT (this is a joke don't kill me)

@etdlgdot

5 жыл бұрын

Steven Gordon dude stop just stop

This one video got me into the cubing community, thank you.

@dabirdie1797

5 жыл бұрын

@Elysteco edited it lmao i dont remember writing this comment

@saatviksingh727

4 жыл бұрын

@@dabirdie1797 wtf

@dabirdie1797

4 жыл бұрын

@@saatviksingh727 Guy said something, I changed the comment, and he deleted his comment

@kimaris4637

4 жыл бұрын

your profile is gundam barbatos lupus rex

@dabirdie1797

4 жыл бұрын

@@kimaris4637 good eye, my friend

Hi i want to buy one GAN 356 X Stickerless but when I click on Jperm's link it isn't stickerless. Any help?

I just solved my first cube yesterday and you inspired me to do it! I love your channel

the algorithm has blessed this video

I saw this video a while ago and decided to get the gan X. Now I saw the video again and I agree totally with your opinion. I recomend this cube 100%.The only downside is the price but in my opinion it's worth it.😊

Thanks for the review I didn’t know if 8 wanted the 354 or the 356 I watched both of your reviews and now ‘ know witch one I’m gonna get!

i know this video is old but i just got this cube as a BD present and mine does not come with extra springs? only extra magnets. and the springs preinstallaed are transparent. i got the same card as you got in the begining of the video that says gan 356 x so i guess it should be. but the biggest diffrernce is that it does not look like yours, mine is one of those black ones with stickers instead of just colored plastic? do you think i got sent the wrong thing?

This is my first magnetic cube so I can experiment with lots of customization

Getting this for Christmas👍👍super excited!!

@JPerm

5 жыл бұрын

hope you like it!

@janjabonski5234

5 жыл бұрын

In my country this cube is not aviable so I'm still using gan 356 Air SM

@Darkmidus

5 жыл бұрын

Me too

3:57 kind of sounds like your on a children’s show😂 Great video! It was very helpful for me!

Hey i want to ask you how to set up the gan 356 x because when i cleand it the first time i couldn't find the same feel as out of the box and it doesn't corner cut as well as before. I probably lube it in the wrong way, how do you do that? ( i have already seen your video on lube a speedcube but i can't get my result)

@JPerm

5 жыл бұрын

I set it up the same way that I set up other cubes. you should use it for a while after lubing for the best effects

My rich classmate : can’t solve his Gan 356 X Also him : * buys another one* After : there , Solved!

@hvrst6241

4 жыл бұрын

If i am you I'll steal his

@arifwazir3584

4 жыл бұрын

my friends have qiyi, moyu, gan cubes and they avg 2 minutes. While im over here with a fake little magic with bad corner cutting even on loose tensions and it locks up and im almost sub 13

@hvrst6241

4 жыл бұрын

@@arifwazir3584 i also thinks my gts3m is fake :(, I also average perfect 13.0ish

@arifwazir3584

4 жыл бұрын

@@hvrst6241 ye at that level a good cube could make a difference, i tried my friends gan xs and i got a sub 11 average my first try.... it just ends up being too expensive and when i try to order from scs, shipping costs a bit too much so yeah, i feel your pain

@hvrst6241

4 жыл бұрын

@@arifwazir3584 wow I legit just got dayan tengyun v2 and beat all pb average, got sub 10 ao5 sub 11 ao12, exactly the day i graduate from elementary lol

Always good content

i just got it today right after i watched your vid thanms for the review it teally helped me wiht my purchase

Just got my 356 Air SM and I love it. All I have had are Rubiks brand cubes. I started on an original from the 80s, old color scheme also, blue opposite of the white. Still my best time is on that old thing. But I dont see it taking long to beat that on my new cube. IMO $60 on a cube really is not that bad in the grand scheme of things. Cubing is a pretty inexpensive hobby, $60 is alot for just a cube, but thats nothing compared to many hobbies out there. For example one tire for my mountain bike costs $60, set of brake pads, $40. So totally worth it.

GAN 356 X : *Gives You Best Feeling* GuanLong: Gives You Nightmares

Yes,I have the GAN 356 X.If you ignore the price,it is the best cube ever,excellent corner cutting,no overshooting or pops and it improved my timing from sub 30 to sub 27 in 1 day.

Hey J Perm love your vids men but I have a question what lube do you use for gan 356 X? my cube got dry and it's a bit crunchy not the way it was when I bought it can you recommend me some lube?

Love the way you make videos! Make more you have a talent in it

Please start making some of your 3×3 solves video in slow motion And critique your own solves and suggest which move you can do instead please 😇

@jmandoeskarate4456

5 жыл бұрын

uni cubing i’ve been thinking about doing this with my own solves... But I don’t have a tri-pod

@fdkd110

5 жыл бұрын

@@jmandoeskarate4456 sorry for the late reply But I do it with the help of thermocol sheets you can actually see some KZread videos for that !!

Can you also make a video on which is the best cube according to you on the market for all events.

Ik this video is old now, but it's fascinating to me because I just started cubing early this year, my first good cube was gan 11. Needless to say hardware has vastly changed in just 3 years. But I love tinkering with things. I wish i started cubing in my teens or even my 20s. Boy was I missing out being busy making poor life decisions. Thanks again for teaching me how to cube. It helps me stay sober because I need to have a properly functioning mind in order to continue improving.

@TheHispanicUsername

Жыл бұрын

what if you started cubing at 12 yrs old? (aka me)

Hey, J Perm. Lovely video, been watching it everyday while waiting for my GAN X that i ordered 5 days ago. I've noticed your dell laptop, it looks sick. Could you please tell me what model of DELL laptop that is? Kinda looking for a cheap laptop to buy as well.

I can see how they are worth it and I'm not even a speed cuber. I'm just starting out. I've watch so many reviews and comparisons and can't ever recall not one person calling any of the decent speed cubes like the X Man Bells and stuff (around 15 to 20 U.S. dollar cubes) the perfect one. This one they don't like the tension, this one they don't like the corner cutting, this one they don't like the magnet strength, the list goes on and on. Most pro cubers have quite the collection looking for that perfect cube. Meanwhile a cube like this, though it can be a pain to set up with some trial and error, can be that perfect cube you've been looking for. Buy 4 20 dollar cubes looking for that perfect one you'll have spent more then the very most expensive Gan you can get. Pain in the ass to set up? Probably. Worth it though? I definitely think so.

@the1barbarian781

5 жыл бұрын

Grimmsha72 if you do want a good starting out magnetic cube, search up Yuxin kylin v2 m, not really necessary to spend that much when that cube is 10 dollars and gets you almost the same times, but if you think you want to get the very best, for me, buying it made me enjoy solving cubes more lol

I got mine when Gan first posted it for pre-order on their site, so I've had a bit of time to mess around with it. Right now my setup is Green springs at 0.6, the strongest magnets, and some weight 5 on the pieces. Seriously, it's a fantastic cube. My PB hasn't been set on it for single, but I'm far more consistent on it and I've broken my PB averages multiple times since getting the cube. I completely agree that the 354 had a great feel to it that I was hoping this cube would also have, and I'm glad to report that it's just overall a better version of the 354. I did actually order a 354 from Gan on their new Infinity setup, so I'm hoping that it also is better than the original 354.

@JPerm

5 жыл бұрын

thanks for the opinion! I think your setup matches how it is out of the box, which is a really good setup already, and I love how we can just use 0.6 to specify the tightness rather than try to describe the screw depth haha

@davveinjr

5 жыл бұрын

@@JPerm Funny enough, I remember when I got my first speed cube back in like 2009 and it was an Alpha V... I put sharpie on the screw so I knew exactly how far I wanted it to be screwed into the core if I took it apart again. Having this specific number is such an awesome way to be able to share tensions with people.

I had a moyu weilong gts 2m as my main for a while then i got this cube and I was hooked. Customised it with yellow magnets with yellow springs, i got my pb under 15 seconds with this cube and my average is under 20 seconds when i was struggling to get 19 seconds with my previous main. This cube is very goood, would recommend

In the IPGv5 how to know if the tension is normal? And if i want to losse or tighten it where should i put it?

Who hates it when the gan logo is fading away?

I never knew people got so into Rubix cubes

@r3xSean

5 жыл бұрын

Rubik's* 3x3* *TRIGGERED*

@yugiohlegend

5 жыл бұрын

CodeSenpai Bruh. He didn’t have to say 3x3. A standard Rubik’s cube is a fucking 3x3

@r3xSean

5 жыл бұрын

@@yugiohlegend dont call it a Rubik's cube because it isnt. Its a 3x3 its not a Rubik's cube

@jainviswam

5 жыл бұрын

Non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber non cuber

@strawsparky33

5 жыл бұрын

Guess my comment got deleted? Salty butthurtness

i just ordered one from cube depot because it was just such an amazing price and i can't wait

Ordered. Great review, sir!

why have i watched this review 100 times?

I tried this cube at a comp a few weeks back. It was incredible. Do you think that it is worth it to upgrade from the SM? I average around 16 seconds.

@JPerm

5 жыл бұрын

I wouldn't call it a direct upgrade over the SM since it feels quite different. I certainly think it's better though. If you liked it so much then maybe you should! up to you

How do you get a sticker less one? I can only find it stickered (I think it is on speed cube shop)

How did u make it so you type your time into cstimer?

Can you do a review on the GAN air sm 2019

@TahirKhan-bb8kn

5 жыл бұрын

We would really like it..

Most people: Well, the Gan x is a bit over priced and i don't think it's worth it. Me: WoW tHiS CuBe iS AmAzInG!!!!!!!!!!!!!! I CaNt sToP tUrNiNg iT!!!!!!!!!!!!!!!!!!!!!!!! EDIT: WOW 4 LIKES EPIC!!!!

@imadethiscomment5663

4 жыл бұрын

your edit made me *Slapp* like.

@BrendanGVFX

4 жыл бұрын

@@imadethiscomment5663 noice

@cccuber5160

3 жыл бұрын

Like begger ? Idk I liked ur comment

Good description of the cube!

Great video, this is my main cube....I'm still a new beginner and have remembered 5 algorithms so far however I always say the algs when I perform the moves, do you eventually just perform the algs and don't need to say them in your head while performing them? When I see you going so fast I can't imagine that you are saying the algs inside your head while solving the cube at that speed? Please advise....thank you!

I really wanted this cube,but i was in a comp and nobody sell a gan 3x3 but there was a gan 4x4 so long story short i wanted the gan 356 x but i bought the valk 3 power m cause it is very suitable for me and this story doesn't mean at all but i just wanna share my story and i know that the valk 3 power m elite is coming at 2019 and the valk 2 m is almost out too (22nd december) so i'm just gonna buy valk 2 m or not valk 3 power m elite. Ok thx for reading if u made it this far

Ya KNOW YA BOI BE BUYING DOSE GAN 356 X'S!

@bigcubeparity6809

5 жыл бұрын

@ʟ o k i could you send me a gan 356 x?

@bigcubeparity6809

5 жыл бұрын

@ʟ o k i oh I understand

@vanillacrazycake5982

5 жыл бұрын

@@bigcubeparity6809 r/choosingbeggars

Mine went real loose and magnets not work. Is it because bad lubrication? Pls give a solution

I bought this after getting into cubing. A friends with more experience said it was the one to get if I just wanted one. I’ve had it since early 2019 and it’s still going strong!

I accidentally took my cube apart and saw that it’s also lubed

Hey JPERM, can u make a video on the good and the bad of gan x

Recently got into cubing a few weeks back. I did like most and bought a rubik, that was terrible, now were in lockdown I cant buy a speedcube. This is what I want. Thanks for sharing.

Stock option for numerical is fast had to tighten but the ges color was perfect (it comes with green pre-installed) and magnet strength was perfect! Worth the price.

Can you do a review on ShengShou Mr.M 3x3? This is the cube I use as my main, and I would love to see what a professional thinks about it :)

@soni801

5 жыл бұрын

neicu34 wtf is that? Never heard of. But I have already ordered GAN 356 X so I don’t need other cubes :)

@electrocubing432

5 жыл бұрын

The Mr. M is good. If you use Roux. Otherwise its to blocky

Thank you, I ordered the cube and got the discount.

I remember the good old days when we thought 60$ was the max a cube could cost.

@thisisanaltaccount6126

2 жыл бұрын

60 dollars?Here in Brazil 48 USD is over 200 bucks.

The gan 365 x was my main for two month and i've never having bad feeling about it,i thing that because of the numerical ipg and the changeble magnet that make the cube feel more stable but also faster in my opinion.i personally prefer the green spring set on 0.6 and the strongest magnet

When people say this is expensive I'm just laughing. I'm not rich, I don't even have a lot of money, but 60 USD ain't much.

@ej22_gc86

4 жыл бұрын

Ofbaserion for a cube, it is, considering an average decent speedcube would cost around 15-30

@lumina_

4 жыл бұрын

You seem to have a big sense of superiority

Why have I watched this more than 4 times now?

@twistiicuber1055

5 жыл бұрын

Haha, it’s a very good video

Hey J perm should I get the GAN 356 X OR GAN 356 XS. PLS TELL

Jperm: lot’s of customization is overwhelming Gan 356M: I gotchu

I see you on that #StackmatGrind

@JPerm

5 жыл бұрын

desperate for competition results LOL

@ashaydwivedi420

4 жыл бұрын

Hey I saw you on cube solve hero discord

This just HIT the KZread algorithm

@ThisAccountHasBeenTaken

4 жыл бұрын

Your profile photo is cringey

I ordered this cube and it comes tomorrow. Its going to be so good

HI J PERM PLEASE HELP :( Long time fan here. So I’ve had my GAN X for eight days and have done a lot of solves on it. Is it time to worry about lubing it? When do I know if my cubes need lube? I’m currently looking at weight 5 lube since you use it. Is it a good lube for GAN X? It’s currently out of stock, any good replacements that you recommend that arrives quickly? Thank you very much!

I'll end up getting one but theres a really good chance i wont use it, hopefully that will change, i have a habit of just grabbing my little magic and solving with that, id say 5% of my solves are done on actual 'good' cubes, i like the no magnet feature cause when i solve OH i dont like having magnets in my cube, and most of the time i prefer weaker magnets in general.

@JPerm

5 жыл бұрын

OH definitely has more people preferring magnetless

I just got the Gan 356 and this is obviously my main because when I was just speedsolving with it and I got a Pb😂 7.89sec👍🏻👍🏻👍🏻👍🏻

@Adrian-gp7me

5 жыл бұрын

Which 356 you talkin' bout

@unrepoio6480

4 жыл бұрын

We have the same PB lol

4:04 is it just me or is that sound satisfying

Hello i just have a question, im getting this for my birthday and i got to pick the black or stickerless which is better pls help

@dabirdie1797

4 жыл бұрын

stickerless