Leave a comment if I left out anything important! Edit: the only non-speedcube lube I'm aware of that works well is Traxxas 50k or anything similar. I don't think there is any common household item that works well as lube unfortunately.

@raycuber6153

3 жыл бұрын

Thank you Jperm, you have helped me get sub-20 with The Rs3m 2020 ( Bought it after I watched the review! ) Anyways, thank you!!

@guilhermeh1134

3 жыл бұрын

ok

@oliverhurny

3 жыл бұрын

no

@neoglazier2813

3 жыл бұрын

Maybe the captions but otherwise noice video

@AnunayMintoo

3 жыл бұрын

K

I think you missed that F2L is gonna make you slower at first but once you get good at it it'll make you so much faster

@JPerm

3 жыл бұрын

Yes I forgot! It's very important for new learners to understand so they don't get discouraged.

@vybzcubing7272

3 жыл бұрын

@@JPerm yeah

@Ryan-fj5vq

3 жыл бұрын

I remember it took me twice as long with f2l at first then beginners then after a month only there was improvement over beginners

@lilith6072

3 жыл бұрын

it's way better to be slow with a good good technique that to be fast with a bad technique

@phase0400

3 жыл бұрын

my F2l is still slow and its been months. Still averaging at sub 1. Yeah sub 1 minute. Although I was 1 min 20 so I guess you could call that "progress".

**DISCLAIMER** The cubes NEED to be paid actors otherwise this won't work

@shortmemeguy248

2 жыл бұрын

I found a similar vid kzread.info/dash/bejne/ZJd12LedY7nal6g.html and also nice 420 likes

@okeydoesstuff1105

2 жыл бұрын

Lol

@guatemalaballmappers8989

2 жыл бұрын

@@okeydoesstuff1105 😂 LoLyou so funny

@xAntisune

2 жыл бұрын

@@guatemalaballmappers8989 lmao what

let's be honest, who didn't start on Rubik's brand.

@splashnoy

2 ай бұрын

me

@JaneCMusic1

2 ай бұрын

I started on a mini cube then went to a rubiks and learned f2l on it then moved to a RS3M 2021 which is my current main

@JonathanAufderheide-ln8pr

Ай бұрын

@@JaneCMusic1Why are all these replies so recent? This comment is 2 years old lol.

@Specter05624

Ай бұрын

Me

@JaneCMusic1

Ай бұрын

@@JonathanAufderheide-ln8pr idk

HELPFUL TIP: If you don't have a stackmat timer (like me) then you can hold the two ctrl keys to start the timer. It works a lot like a stackmat. Like so others can see!

@KiWi220

2 жыл бұрын

but where will we drop the cube? on the laptop screen?

@agentyeet3136

2 жыл бұрын

Sorry, I didn't think about this. I use a desktop instead of a laptop

@KiWi220

2 жыл бұрын

@@agentyeet3136 yeah it works well for desktop sorry if my comment hurt you its a nice idea

@zenhunter3552

2 жыл бұрын

Nice tips

@Lohipohi

2 жыл бұрын

@@KiWi220 probably

Me: Is speedcuber Jperm: HOW TO BECOME A SPEEDCUBER Also me: still watches video cause its Jperm

@madvier_8336

3 жыл бұрын

now im speeder speed cuber

@juns5979

3 жыл бұрын

dude it's Jperm

@5tuffz

3 жыл бұрын

He makes such practical videos

@TesserId

3 жыл бұрын

@@5tuffz I'm officially addicted to them.

@justprobus64

3 жыл бұрын

@@TesserId yes

The Speedcuber Timeline 0:00 - 0:20 - Intro 0:21 - 0:52 - New/Better Cubes 0:53 - 01:15 - JPerm’s Recommendations 1:19 - 1:40 - Speed Cube Prices 1:41 - 2:09 - Other Fun Puzzles 2:10- 3:08 - Should I Get Better Cubes? 3:09 - 4:48 - Timing Apps/ Products 4:49 - 4:54 - Stack Mats 5:01 - 6:11 - Lube/Lubricant Recommendations 6:14 - 6:21 - JPerm’s PromoCode 6:22 - 8:23 - Cubing Methods And Solving 8:24 - 8:55 - Competitions 8:56 - 9:16 - Trying Blindfolded Or One Handed 9:17 - 9:33 - Outro/Credits

@v1nzaro

Жыл бұрын

*timestamps

@xzoxxPlays

Жыл бұрын

thx

@allthesith9616

Жыл бұрын

Thanks!

@caydawg4893

Жыл бұрын

I love people like you

I got told "do f2l intuitively and ended up making my own f2l method with a combo of advanced and begging such as putting the edge and corner into the bottom layer simultaneously without having to pair them up. However I think I have a much slower method to get them into the top layer in the first place as I'm not very good at recognizing patterns. Currently still working on it with an overall ao50 of 56.34 seconds

@HelloEatsLead

Жыл бұрын

I do my own method of crop and I get sub 20 solves keep practicing !

F2L is like the graph of the function *y = e^x* It starts slowly but then suddenly goes up really fast. Same with F2L, at the start you're slow but with time you get much faster

@countryballsanimationsandm5362

2 жыл бұрын

YES!

@junker5461

2 жыл бұрын

ye

@coolguybraydan2758

Жыл бұрын

exponential growth

@dabmachine1

11 ай бұрын

more like cuberoot x or ln x

@gurpreetkaursethi1971

8 ай бұрын

​@@countryballsanimationsandm5362 you are cool

Me watching this video: "hmmm yes I definitely didn't know this, but I'm still thoroughly enjoying the video as always" :)

@kscuber5865

3 жыл бұрын

Hi Dana!!

@5tuffz

3 жыл бұрын

Same here! Been cubing for 5+ years now, but still learned something new

@JPerm

3 жыл бұрын

Dana you should get a 4x4 it's really easy to learn since I know you can do the 3x3

@vybzcubing7272

3 жыл бұрын

@@JPerm yeah Sir, she should

@foolishkai1822

3 жыл бұрын

@@JPerm ive tried to learn the 4x4 but its a lot harder for me to learn than the 3x3 for me. Ig its different for everyone but ive tried multiple times to solve a 4x4 even though i got the 3x3 in a day

Hi! Im 15 and and i first started to learn how to solve a cube in 6th grade. After that I just quit but then I met a dude that is like on national level of speedcubing and now I’m back into it! I average at like 45 seconds now and your tutorials help so much so I just want to say thanks and continue doing what you do jperm!

@theautisticturtle4817

Жыл бұрын

Same I'm just no quit part and I'm in 7tg

@TheHispanicUsername

Жыл бұрын

Same here except the quitting part hasn't happened, and instead of national record type stuff it's state record stuff and i'm also in 7th grade (12 yrs old)

@Ecsaqt

Жыл бұрын

I'm in 6th grade and I also average 40 seconds

@destinkuiper

10 ай бұрын

Is a nexcube to good?

@JaysonPL

8 ай бұрын

just wanted to ask but after 1 year, did you made progress on solving the cube faster than your average?

0:55 Shameless plug

I started getting back into cubing 3 days ago, forgot how much fun it is! Your tutorials are really helping me get better at F2L, thanks J Perm!

@clubcubing3723

2 жыл бұрын

Good for you!

@Danoxii

2 жыл бұрын

That comment is a year ago i wonder how you are now

@sweetysureka1573

2 жыл бұрын

Yay

@nikhilkotturi7682

Жыл бұрын

I just came back few days ago after 4 years and even back then my personal best was 45 so need to work on it

@fyve2806

11 ай бұрын

same here, gonna comeback soon with 2x2x2:) Edit: It's been 2 yrs and how are u?

My RS3M 2020 arrived yesterday, and I LOVE IT. It's sooo smooth. And it corner cuts slightly over 45°, and it's the *best* cube I've ever had

@realcopoolman

2 жыл бұрын

Cool, i got it too. But the fun thing its my first speedcube 🤣

@pianopianist5709

2 жыл бұрын

@@realcopoolman Haha same, it is my first speedcube too, it just got a stripped core. I probably (disassembled?) it too much, don't make the same mistake as I did

@realcopoolman

2 жыл бұрын

@@pianopianist5709 lol

@realcopoolman

2 жыл бұрын

@@pianopianist5709 well i have my cube for a week and got it lubed,i disassembled it but it was ok.

@pianopianist5709

2 жыл бұрын

@@realcopoolman Yeah but don't do it a lot, I used to do it once every 5 days and it got a stripped core within 6 months

Hey there my friend. My name is Josh and although I'm not a cuber I enjoy your videos and thought you deserve the praise. Your statistics and research is very good along with your delivery of information. I like watching your unboxing videos and my wife and I zen out sometimes to them. Wish me luck because in the future I plan to comfortably solve my own cube. Take care!

WHERE IS THE PYRAMINX TUTORIAL??????? REPLY FOR HIM TO NOTICE

I literally bought the 4 puzzles he mentioned that would be easy to solve right after my 3x3 what the heck

@JPerm

3 жыл бұрын

I've been watching you. 👻

@wolfcubing5848

3 жыл бұрын

@@JPerm I am terrified

@aleontecristian9260

3 жыл бұрын

@@JPerm i did same actually, what a coincidance😮

@vinayaktyagi1001

3 жыл бұрын

he _knows_

@gamingjedi52

3 жыл бұрын

@@vinayaktyagi1001 you mean he *knows*

2:00 I'm not the only one that noticed that J Perm was waving at the Mirror blocks, right?

@officialveerbajaj

3 жыл бұрын

Wow good catch!

@Karlenk0

3 жыл бұрын

I cant unsee it now

@bigdoge

3 жыл бұрын

Your not alone.

@SparshVaish

3 жыл бұрын

You're not alone

@videoawesomeness5234

3 жыл бұрын

nope, i saw it too :D

I’ve just got into speed cubing! Watching your videos have inspired me to give it a try. Now made the next step and ordered the JPerm RS3 from speed cube shop. Just realised I’ve forgotten the discount code😊😢 love the videos keep them coming!

My first ever average at a competition was 36 seconds but then when I learnt beginner CFOP (cross on bottom, beginner f2l, beginner oll and beginner pll) I decreased my time by 12 seconds in 4 more competitions. Highly recommend learning it.

I find it really useful to learn other methods/events like One-Handed, Blindfolded, Roux and ZZ, so you have a better general knowledge about how the cube works. Before trying Roux I really couldn't do slice moves, and after trying to learn some EG-1 algs for 2x2, I learn a lot of useful fingertricks! Roux and Blindfolded teached me quite a bit of wide moves, and One-Handed... It's a completely unique set of Fingertricks, and it developed my pinky muscle memory so much! I haven't tried ZZ yet, but I'm pretty sure it's good for learn when an F2L case (usually) needs a rotation or not.

@fliprpo4914

Жыл бұрын

It’s fucking impossible

@KiWi220

Жыл бұрын

@@fliprpo4914 no it's not

@wafatanzeel1503

9 ай бұрын

can you say that again but in english pls

@joshk147

8 ай бұрын

Learning the beginners method and cfop was what originally hooked me into cubing so learning new methods or events helps keeps me interested

can you make a video on 2 sided pll recognition? Not just basic things like when the headlights are on the left, but being able to recognize from 2 sides from any angle. I feel like there’s a lack of videos like that on KZread currently either way great video as always, and congrats on 500k :)

@1akirasan1

3 жыл бұрын

There is a very good tutorial on KZread. Search "2 Side PLL Recognition Guide (Simple)" or "YE8VCt8QsAc". It helped me a lot, especially with cases where there is no headlights or blocks in sight.

@Bubbletubb

2 жыл бұрын

You could probably do this yourself, just do a lot of solves, and when you get to PLL just stop and really think about what case it could be, if you need to pull up a PLL case pdf that could help. Good luck

I first started with other KZreadrs for tutorials on how to solve it, cause I didn't see this channel. Then I searched on how to solve a Rubik's cube with CFOP method. I saw some other channel, but for some reason the video was like 45 mins . And your videos are much easier to understand .I watched your videos, and they help much more then the others from other channels. Thanks slot!

I literally learnt almost everything I know about speedcubing from this legend. Like seriously full cfop and ortega was a nightmare before I saw this channel.

"Leave a comment if I left out anything important!" In the video, you mentioned how weight 5 can slow down the cube, but newer cubers may not understand the importance of slowing it down (they may think faster => better). This may dissuade them from buying the best lube. I guess you could explain why slowing down the cube is important in the description/pinned comment?

@aaronwang9817

3 жыл бұрын

:sadlife: editing a comment removes auto-removes hearts just went to fix my grammar lmao

@lumina_

2 жыл бұрын

L

2:00, Who else noticed he was waving his hand 😂😂

@tejas5341

2 жыл бұрын

yep!

I just love how concise your videos are, I've been watching them all afternoon. No better words to describe. Exactly what I need! aaaa

4:31 He beat the world Record!

It seems to me that F2L is probably the easiest and most intuitive to learn to do it quickly. I'm not too worried about cube rotation, making the cross on the white side quickly, but I am very interested in learning the OLL & PLL steps of CFOP. On the other hand, I doubt I'll ever really take up speedcubing, which is probably why I'm not too worried about trying to speed up. I'm sub 2, and pretty happy with that, and it's enough to amaze my kids! lol! Even though I won't take it up myself, thanks for all you do to make speedcubing accessible to the masses! :-)

@yosua0

2 жыл бұрын

Sub 2 would surely amaze anyone on this planet… 😳😂

@HuyNguyen-ll9gz

2 жыл бұрын

Sub “2”

@unnamed5338

2 жыл бұрын

sub 2? is that a new world record?

@rohanprabhudesai9394

2 жыл бұрын

Sub two minutes I think

@Plant_btw

2 жыл бұрын

Im pretty sure he means 2 minutes guys

I started cubing in the summer and everything you say in your vids is 100% true. You helped me improve and I thank you for that

I needed this. Thanks!

even though i have been cubing for a while and have all the stuff you suggest, i still love this video, its just so good

7:40 that looked so satisfying tbh

@ankushkumarmaity9785

2 жыл бұрын

Learn oll and you would get satisfied in every solve

4:33 2.19 3X3 REAL NOT CLICKBAIT

@sinpi314

3 жыл бұрын

Verified youtuber with only 1 like :O

@rivql428

3 жыл бұрын

Are u a cuber?

@ccc-cornercuttercuber7606

3 жыл бұрын

Omg Omicron Is A Cuber?

@sinpi314

3 жыл бұрын

@@ccc-cornercuttercuber7606 ikr‽

@diamondgamingstudiousmrdgs

3 жыл бұрын

You a cuber?

Those are some great tips! Love your vids!

His solves are so satistfying!

I was literally watching an old video of yours and then I get the video notification of this video. So now watching this one :)

I have learned 3x3 and 4x4 blindfolded from you. Really Thank You Sir.

@jperm2344

3 жыл бұрын

sir?

@mr.peeper4082

2 жыл бұрын

@@jperm2344 Fake jperm be like

thanks j perm my life has changed when i first got into cubing its my favorite thing to do i learned how to solve because of you 😊😅

Okk Got it JPerm , I am done with the beginners , solve the cube sub 40 secs , now my goals are CFOP , One handed and blindfolded eventually.

Legends always click on J Perm's videos faster than they could solve a j perm.

@QuantumQber

3 жыл бұрын

What's a jperm🙃

@bigdoge

3 жыл бұрын

@@QuantumQber ...

@QuantumQber

3 жыл бұрын

@AJ Hauter it was a joke sorry

@andyflips1766

2 жыл бұрын

I average under 40sec on a Rubiks brand speed cube so I feel like I could probably get down to a average of like 30 on a actual good speed cube

@paarthpradhan198

2 жыл бұрын

@@andyflips1766 and that's the misconception of people, good cubes can make a difference but not a way big difference. Trust me I was sub 35 myself on "Rubicks" cube then I switched to Jperm RS3M 2020 and was expecting to get sub 28 but I was getting almost same result. Unless your rubicks brand cube really really sucks, I don't think you will be able to get sub 30 on good cube WITHOUT PRACTISE. Actually I noticed for the first few days I was faster on my rubicks brand cube than on my rs3m because I wasn't used to it or basically I didn't have it's practise. So if you wanna become sub 30,practise that's it nothing else but yeah you should probably look into buying a good cube for sub 30 because it's difficult if you're not expert at cfop or other advanced techniques.

You're not a real speedcuber until you *won* a giveaway. yup I'm not a speedcuber

@arnauolivemarcos5555

3 жыл бұрын

Me neither

@notmyname8443

3 жыл бұрын

Insert sad cuber noise :(

@5tuffz

3 жыл бұрын

Dont be sad, you don't always need the newest cubes. Be content with what you have and the ability to cube at all!

@christian3145

3 жыл бұрын

@@5tuffz definitely! but I wouldn't mind to experience a win even with the cheapest cube out there.

@5tuffz

3 жыл бұрын

@@christian3145 items won't buy happiness 🤣 but I see where you're coming from

4:00 i used to use twisty timer on my tab too but if youre not aware then cs timer is also now available on phone and you can add a shortcut to home screen at which it will just be like an app and thats what i use now.

The Moyu cube you recommended is absolutely amazing

Fact: H perm is called a H perm as you perform h perm and then upside down the cube and the perform it again you will get a H design on lateral faces:)

@TPerm700

3 жыл бұрын

@H Perm 9 LOL

not gonna lie, at first I thought this video was going to be like the "how to practice effectively and improve faster" video and wasn't expecting a "serious" video

@zakiabintang7045

3 жыл бұрын

It's not april 1st that's why it's a serious video unlike the other one

Congrats on 1 million subscribers and the very first curbing channel to hit it

Your jperm cube sounds amazing 🤩

Hey Jperm, I doubt you'll see this but, thank you so much for the videos you have made for the past year, thanks to you i was able to improve so much, i went from a 4 minute best single to a 12 second best single in 1 year, thank you so much.

@lawrenceandrade2622

2 жыл бұрын

I'm newbie but I can done within 1 minute and 40 seconds

@lawrenceandrade2622

2 жыл бұрын

Can i be more faster?

@proalgcuber198

2 жыл бұрын

@@lawrenceandrade2622 wdym

@unnamed5338

2 жыл бұрын

@@lawrenceandrade2622 of course

@isthe3573

2 жыл бұрын

@@lawrenceandrade2622 yes, just practice cfop or roux. it makes you slower at first but you will be 2x faster when you are used to it.

3:35 i use the : ruwix timer And it has all your solves , average It has 2×2, 3×3 , 4×4, 5×5, 6×6 , 7×7, pyraminx , square-1, skewb Crambles and it shows all the 6 faces scrambled 👇 if it was helpful

@FlashyEdits555

2 жыл бұрын

Just realized that I used the same timer!

Bought the MoYu RSM M 2020 on your recommendation! My speed cubing adventure begins proper!

this is the best channel i have ever heard!!!

Casually solves a cube in 10 seconds while explaining meanwhile my cube remains unsolved for months

Hi, recommendations please: I want a larger nxn that is like a 6 in difficulty and an 8 in fun (out of 10). What is better out of 5x5, 6x6, 7x7, 8x8 etc? Thank you.

@JPerm

3 жыл бұрын

For me the most fun big cubes are 5x5 followed by 6x6. Usually smaller will be more fun as you'll adapt to the turning style more quickly, and it's hard to skip a cube size.

@TyperMarlinGames

2 жыл бұрын

Definitely 5x5. 6x6 is when it gets a little bit less fun to speed solve, in my opinion.

I have the moyu RS3M 2020. Bought it recently It works very well

this is so funny, this video was recommended to me right after my first speedcube came in the mail. used to use a rubiks brand that taught me how to solve the cube, but i just upgraded to a GAN and it significantly improved my time.

How to become speedcuber: don’t use a rubiks brand

@nxrphoenix978

3 жыл бұрын

Lol

@5tuffz

3 жыл бұрын

You can still get amazing times with them! I can almost average sub 10 with it!

@angelicavarone8709

3 жыл бұрын

I get sub 0 with It and the belt metod

@Howhungry1234

3 жыл бұрын

Angelica Varone I get sub -69 with rubik’s brand

@skrimp9622

3 жыл бұрын

*Tymon laughing

Im at sub 25 average at struggling as hell on learning look ahead ( i know i have a lot other things to.improve too). One of the main issues is actually focusing on looking for other parts while putting into slot (even tho i dont need to look at it). More frustrating is that i struggle with figuring out my 'progress' in it. Simetimes pairs like pop up just in front of your eyes so you dont really need to do anything special to 'look ahead', but sometimes they hide on the back etc. Hence its difficult to measure whatever i get better or simply being more lucky.

This video helped a lot thanks

Thank you JPerm for this video so i can put in my powerpoint:)

ColorfulPockets *solving a cube* Judge: My legs are hurtin man’

i randomly stumbled upon this video in the prosses of waiting for my RS3 M 2020 to come Lol

@mynameistperm9031

2 жыл бұрын

Same, I also was waiting for my rs3m 2020 to come and stumbled upon this.🤣

Never learned to solve a 3 by 3 and bought a puppet cube because youtube has showed me cubing videos for no reasons and its concering.. but your channel is nice so bought with code bla bla but see me in like 20 years when I have solved the puppet cube lol. It makes for a great toy to just randomly play with though lol. I got all the corner solved two times and had to retain myself from opening your excel file then

Tnx so much i NEEDED that

I started with like a 1$ rubik’s brand that someone gave me and I moved to even a very budget speed cube and it felt so amazing I can’t imagine what something like a GAN 11 M pro would be like

@bubbles13244

2 жыл бұрын

It's actually not like it's God mode. It's good but it's not like super good

@bubbles13244

2 жыл бұрын

I am Main it, but like the budget cube i had was not like way worse than it

After learning the 3x3, the best cubes I can suggest you can learn are the 2x2, 4x4, pyraminx, skewb, and mirror cube. (And trust me, the skewb is also a piece of cake! You just need to memorize one algorithm and apply it throughout!) The really enhance your eye coordination and help you improve in cubing. 🙂

@subzero.cuber47

5 ай бұрын

Also skewb teaches u a different perspective because of its silly turning, meaning you 100% will learn new finger tricks

I have the one that you use as a bad example and I love it

Jperm You are the best speddcuber out there keep up the hard work a

Hey J Perm, I want do a video on m KZread channel about your channel history. However, in order to do that I would need to show clips of you videos? Can I do that without you suing me for copyright?

@JPerm

3 жыл бұрын

Yup! I personally don't issue copyright notices when people use clips for their own content.

@crift3vil731

3 жыл бұрын

Hey

@cubingnetwork2872

3 жыл бұрын

@@JPerm So, is it Ok if I show a 5 minute video of clips of your videos throughout you channel history? I will give you credit.

In the description, “dio Brando” has been listed as one of his patrons

@fruity_colal2092

2 жыл бұрын

XD

Hi jperm this video helped me a lot even thou I am already a speed cuber. Thank you. 😊😊

5:09 THATS MY ONLY CUBE AND I WAS USING IT WHILE WATCHING THIS AND U GO “this is just some random cheap cube” CMON MAN

Who recognized, that he waved his hand in the mirror of the mirror cube.

@A590Gaming

3 жыл бұрын

Time stamp?

@benkucinich5755

3 жыл бұрын

i did

@IndiaballMapping

3 жыл бұрын

@@A590Gaming 2:00

I didn’t know that dust could have catastrophic effects on cubes. I was very confused on why my RS3m 2020 just started performing worse, i have only had it for about a week and it’s getting really dusty in there

@nikobellic2869

3 жыл бұрын

Clean it!

@angryh9392

3 жыл бұрын

@@nikobellic2869 yes I have, I worked wonders until it needed to be cleaned again.

@paarthpradhan198

2 жыл бұрын

@@angryh9392 store the cube in a dust free environment or best just keep it in its box when not in use, another advice I'd give is use less lube because it's fragments can get stored in there and appear to be dust. Another advice can be to disassemble the cube less because that too can affect it. And finally, clean cube once in 2 - 4 weeks. After cleaning try your experience without lube for a while because I cleaned my cube just yesterday (at first it was lubed) but now I feel like the without-lube cube seems better than the lubed one (I have RS3M 2020)

@Plant_btw

2 жыл бұрын

@@paarthpradhan198 i heard from some other comments that if you dissasemble the rs3m 2020 too much the core gets stripped

I got my jperm moyo rs3m 2020 today. I am new to cubing and am still very slow. I have one method that takes me 2:22 minutes. But one day. Thanks for the videos. I am watching them all the time. So I can be the next max park. To bad I am 43 yrs old man that’s a cop. Haha

Hello jperm thank you so much for you content and without you I will not be a good speedcuber and now I can solve 3x3 under 2n seconds thank you so much

Me: sub 25 Jperm Uploads for new cubers. My Brain: Just Shut Up and Watch it

@SparshVaish

3 жыл бұрын

I accept, this is the same case with me 😛

I hope this gets recommended to everyone so that many people will join the cubing community.

Ellooooooo! Ur not gonna read this but tysm! U got me into cubing and I enjoy it SO MUCH! it’s rly interesting and fun:) I thought cubing would be boring and hard but u explain it soooo wellllll. Thanks!

I started with the cube I found in a store and since your the best yt of cubing which make tutorials I solved it and it’s really bad so I got an rs3m

Have good editing skills and paid actors ;_;

@anubhavisneha6897

3 жыл бұрын

Haha yes lol

@AnunayMintoo

3 жыл бұрын

Lmaoooo

@pk251

3 жыл бұрын

uh, no. and that's for youtube and not even true

@justprobus64

3 жыл бұрын

@@pk251 he plays fortnite so he typed the wrong thing

@noel6187

3 жыл бұрын

There is always "that one kid" on a funny comment...seems like there are 2 on this one :(

Me watching this with a GAN 11 M pro in my hands be like: oh wow

@jack---

2 жыл бұрын

same lol, im not that good at cubing but i bought one cuz why not

Thank you for creating awesome videos

You waving in the mirror made my day!

Need a heart from Jperm

me watching this when i cant even solve a rubiks cube normally : interesting

You should promote your tutorials in the description THEY ARE THE BEST

Keep up the great work

9:28 *Jperm telling us how to be real cubers*

@ShadyBut2

3 жыл бұрын

But it's the last 3 second

@ShadyBut2

3 жыл бұрын

But funnier

I cant get lube because it is ilegal to import liquids from other countries, can anyone recommend a lubericant witch you can buy at a store that wont damage my cube

@ibie27

3 жыл бұрын

Hold up... PETROL?

@1976kanthi

3 жыл бұрын

Is it? I get lube from speedcubeshop.com and I live in India.

@lionellthesman3060

3 жыл бұрын

Hmmm try going to like an rc car store or a hobby store and find traxxas 50k or 30k or 10k if you dant find traxxas and find a notner brand its still gonna do good. example(factory team, hudy etc)

@dylan2.066

3 жыл бұрын

@@1976kanthi its only in my country that i know of

@1976kanthi

3 жыл бұрын

@@dylan2.066 oh ok

Thank you sensei

Mirror blocks was my first cube. Then the 3x3 and Pyraminx. Now for the decihedron

I just watched cubeorithms one

@ReverseBurst

3 жыл бұрын

It’s more of a joke

Hey J Perm, Cubehead Apologized to you about the Cubehead vs J Perm thing. NOW HE realized that you put a comment under that video. he made a video about it.

@pianoandeden

3 жыл бұрын

Shush

I bought the rs3m as a starter yesterday

Thanks for showing this I always wondered how speedcubers solve the cube so fast! I used to be sub 1 min but now I'm sub 30 thanks you jperm

How to become a speedcuber: Cube instead of doing your homework.

@md.asaf-ud-doula4132

3 жыл бұрын

Or do cubing homework

@crift3vil731

3 жыл бұрын

Yes

@crift3vil731

3 жыл бұрын

@@md.asaf-ud-doula4132 maybe

Almost first... how is everyone first.

@CharleyCheno

3 жыл бұрын

because yt doesnt verify

@BradCounter

3 жыл бұрын

@@CharleyCheno yeah I know but like I saw 5 people saying they were first.

@CharleyCheno

3 жыл бұрын

for multiple people it shows "no views or 1 view: "kzread.info/dash/bejne/oX2fysmal9nYmqw.html

@5tuffz

3 жыл бұрын

Stop giving a shit about who is first. Just enjoy the vid

@LukiTruki

3 жыл бұрын

@@5tuffz tru

I got a QiYi speedcube box a few weeks ago, but I started with a Rubik's brand, went to YJ Yulong V2 M, and now I have a GAN 356 M.

Dylan that first solve of the video was damn smooth