As a Stihl dealer and small engine mechanic, I can tell you I have seen this all to often. Most of the time’s it happens because d valve clearance isn’t checked/adjusted often enough. I Alwas recommend to check the valve clearance at least annually. Ore the ,,hammering” of the those shoes that ride in the Cam, will destroy it…… The reason why they made it out of Plastic in the first place, is because of lubrication. Greatings to you and anyone how reads this: Jan from Switzerland PS: There may be some grammar error’s in this text, English isn’t my strongest language 😅

@heel57

Жыл бұрын

@Jan, I am not convinced of this explanation - why would hammering make it wear all the knob down in one catastrophic event as explained by Jon? It makes no logical sense. I would suspect either lack of lubrication or over-heating. One could amplify the other. "Plastic" obviously does not support overheating together with mechanical stress. Could misadjusted valves mean higher operating temperature? Was the machine running extra hot when you used it Jon?

@black.phoenix.

Жыл бұрын

Sorry Still dealer but there is absolutely no reason other than cheap out (or turning more pieces per the same time spend to make one in Brass, since with injection moulding you can pump let's say 10 per cycle while you make one on a CNC) for that cam being made of plastic other than a metal. Don't want to make it so good that it doesn't go bad anytime right, or the after sales would lose profit and new sales also drop since why I would buy a new one if my old 20 year something still runs like a champ?

@tauncfester3022

10 ай бұрын

Why would a company that has been the Mercedes of small industrial engine quality elect to build an engine with plastic cams? I have a 22 year old Ryobi 4 stroke 845r 25 cc 4 stroke engine that finally wore out after 22 years of pretty steady use and it wasn't the cam it was the flywheel, you cannot find replacements for these once the keyway wears out. Nowadays Ryobis have plastic cams and their cams are OHC where all the engine heat is, in the head. Why Stihl didn't take Honda's little GX 4 stroke engine tech to heart is a head scratcher. I also have a Honda GX31 pump engine I bought used in 1998 and it still runs like the day it was made.

@laserflexr6321

10 ай бұрын

@@heel57 Running lean cause of a chunk of rtv clogging the carb could cause it to overheat pretty quick.

@glennlurman3514

9 ай бұрын

I agree with ya bud i do think his oil has been pretty sub par aswell Small engines mech 30 years here. Normal ill see pitting and the comp release failed never seen a melted one that bad. In the fleet i work on we have 40 + of these units.

Love how you always diagnose unusual problems and explain why you are doing a particular "trial" in attempting to isolate the root cause of the failure.

@TomTom-tg2cb

Жыл бұрын

Ummm I don’t think he found any roots causing the problem 😅😅😅

@majstealth

6 ай бұрын

@@TomTom-tg2cb running lean could cause all sorts of problems. as does killing a saw with the choke because the killswitch does not work.

Lets not pretend like nobody saw the little bulldozer and and track loader in the outro. Are those future projects by any chance? Love your videos, you are doing a fantastic job.

@josephking6515

Жыл бұрын

Well spotted. 👍👍

@wg8304

Жыл бұрын

In his winch video he also loaded like a six wheeled utility vehicle onto his trailer which I thought would be part of the future content.

@richardandrehsen3260

Жыл бұрын

Man I'm excited to see all 3 of those on the channel. I was stoked to see them

@FarmCraft101

Жыл бұрын

@@wg8304 It will. Just aren't enough hours in a day!

@josephking6515

Жыл бұрын

@@FarmCraft101 Hey, there's hours at night as well and sleep is over rated. 😁

In today's "throw away" mentality, I think replacing a $15 part on a 10 year old tool would definately be considered a WIN. Glad you were able to find the part and replace it easily. Thanks for posting!

@grantadamson3478

Жыл бұрын

Agreed. I think that is a great design feature.

@stuartandrews4344

Жыл бұрын

Agreed.

@texasjetman

11 ай бұрын

💯 agree

@jomarcruz659

10 ай бұрын

As a fellow small engine mechanic it is def easier the only thing that's hard to trust is the after market carbs 😂

@ctdieselnut

10 ай бұрын

@@jomarcruz659 being a small engine mechanic, what do you think of how comically cheap the off shore carbs have gotten? I bought a couple that were less than $12, have had great luck with them (not to say they're all ok). I've even bought a carb that came with a tune up kit air/fuel filter, spark plug, fuel lines, etc for less than $20. Even if they straight up copied the design, they still had to buy the stock, program and run probably 30+ cnc operations, assemble it, package it, warehouse it, advertise it, and ship it halfway around the world for less than what a subway sandwich now costs. It's just insane to me. I know labor costs are next to nothing over there, but holy crap.

The issue with the clutch is that the pins the shoes pivot on are rusted into the shoes, you need to punch out the pins and remove the rust to allow the shoes to pivot nicely.

That ad segment was actually pretty cool, it was really neat to be able to see the heat and thus the Work that the hydraulics are doing in the line.

@refactorear

Жыл бұрын

Yep, this is an ad I'd watch. This and the ones by Aging Wheels.

@markbrown6236

Жыл бұрын

Yes, actually enjoyed it.

This has to be one of my favorite small engine repair vlogs of yours. The instruction and explanations are invaluable to a novice small engine repair guy. Thank you. I learned a great deal.

I really like my Stihl equipment - have always been a Stihl guy, owned half a dozen saws and several trimmers including a 2 stroke kombi system setup. My only real complaint was the carb on my MS-180 saw, replaced it with one that could actually be tuned and it runs way better. The rest have been great. Their low end homeowner products are way better than any of the other low cost competitors!

I love your videos, but I especially like that you explained how the engine works. The compression release was quite interesting!

@markbrown6236

Жыл бұрын

Always wondered how a compression release worked. Now I know, thanks. Saw the cows around a brush fire, but no close up on Big Mama. How is her hip? Got in one Seal camo, check.

@FarmCraft101

Жыл бұрын

@@markbrown6236 Big momma is doing well. Hip seems to be improving. Cheers!

I am a former Stihl dealer. In the 70’s and 80’s I don’t think that you could get a better quality unit. Sadly everything I have purchased in the last 10 years is plagued with problems that shouldn’t happen. Foreign material in the carburetors. Bad coils. Bad plug wires. Bad tank vents. On and on and on….. no more Stihl for me.

@brianrobson3727

3 ай бұрын

I'm with you, but what do you like instead? I'm not thrilled with Echo's build quality, either.

@steve709061

2 ай бұрын

Echo and Husqvarna are worse. At least stihl is repairable

@my_channel_44

2 ай бұрын

Holzfforma!

@steve709061

2 ай бұрын

@@my_channel_44 lol, get outta here with your bing-bong saw

@my_channel_44

2 ай бұрын

@@steve709061 DeReal, 20" $125. Who bing bong now big boy?

This video was incredibly well done. I appreciated getting to see your entire diagnostic process and your skill in taking apart and reassembling all the parts. What I liked best is your ability to teach how each part functions as you went thru the process. Most of us would never have access to this level of expertise at our local small engine repair shops. Thanks so much.

About 20 years ago, I installed a new telephone system at Tecumseh's warehouse in Slough, UK... I was shown around, and was impressed by all the stock they held... Chatting with the boss of the operation, I was told that their mower engines were designed to last 100 hours at most... or two average years of garden mowing... shocking!

@CrimeVid

Ай бұрын

Diy electrical power tools are only expected to be able to do 16 hours work to be of "merchantable quality" ?

You know that you love some FarmCraft101 when you see the notification pops up on your phone that a new video was posted. You park your tractor and head to the house to watch the new video. Not disappointed eighter, it's another great video.

Enjoyable, venture into a Sthil multitool. All these producks have a built in manufacturers end life. You have the confidence and skill to dismantle and rebuild, most owners do not . Result is machines get trashed and new ones are purchased. C’est la vie. Thank you.

7/31/2024 one of the best teaching well done videos i have seen in years! Great video, great volume, not just a bunch of talking about it. THANK YOU!

I tend to use separate tools for each job. My FS85r weedeater is still going strong, as is my chainsaw, blower and hedge trimmers. Love your channel.

That was very interesting indeed I have never seen a 4 stroke that runs with mixed gas. Thanks for sharing.

@letsdothis9063

Жыл бұрын

My dad has a troybilt tiller that has a two stroke, but runs on regular gas. It has a oil tank that you fill everytime that you fill with gas. It mixes the oil into the gas at the carburetor. It's weird.

That's pretty interesting. I have a KM-56-R powerhead and those same attachments, plus an edger. It's a nice little system. The KM-56-R is a true 2-cycle, but I had to go pull the engine diagrams to confirm that. I never looked too closely at it because it's always just run :)

It's impressive how much more joy you can get out of your work you can get when your tools are working correctly/well.

Great to see your process but you should check the hole in the cover plate where the cam gear shaft rides. It opens out letting the shaft wobble causing it to wear early. That's what happened to my 131 so I had to replace the plate as well.

Jon, Thanks for the teardown, repair, and all the explanations! Always good and the viewer might even learn something they didnt know, as I did about the 4 stroke but mixed oil/gas. That cam was terrible, glad you got it fixed!

Great content, as always. It's very satisfying to watch you fix stuff and explain what is what.

You are a very skilled teacher and every video you post is a wealth of knowledge. Always excited when you release something.

Love your small engine videos. I've got a Craftsman 2cycle weedeater that is 30 years old and after replacing the fuel lines and tank filter and periodically adjusting the carb and greasing the cable drive, it still runs great.

@theshapeexists

Жыл бұрын

Those old craftsmen products were awesome.

Have the exact same unit and around the same age. Thanks so much for documenting the maintenance and repair. I think I'll need to adjust my clutch like you did.

@ericroellig6704

Жыл бұрын

Ditto. I have the same one. So far mine “just works”. I’ll be on the lookout. Watching further into the video… ick. I’m not happy. I have 4 of the attachments in think. It’s really nice to only have 1 engine to maintain.

Nice video. Practical, helpful and with your usual sense of humor. While not rebuilding the boom lift hydraulics, this video was equally as interesting and probably more useful for us folks. From my experience replacing that carb diaphragm that's a little stiff will help with engine performance and response. The clutch hanging up could have also contributed to the cam wear so fixing that should help. I have also noticed a difference when using Stihl's fuel or Aspen fuel vs. pump gas or other canned fuel, for what it is worth. Looking forward to next week's video.

@rossy83

Жыл бұрын

It doesn't make sense for commercial guys, but I only run Stihl gas. I don't worry about it sitting, things start and run fantastic on it. My 4 Stihl engines are going on 3-5 years old and all start with little to no fuss.

@dennisyoung4631

Жыл бұрын

Have wondered about canned fuel (for a rarely-used engine or two, where reliable operation is needed.)?

Mr John your videos are some of the most informative on the internet. I work for a Stihl dealer and didn't know about the camshaft. We never get in to the engine that far. One of our stores work on all the units, I just do the small stuff. Thank you for the crash course in rebuilding the engine. Thanks for everything you do for the videos

Thanks, It's fun hanging out on the farm. Big Thumbs Up.

Great job John! You are a constant inspiration to a mechanical hacker who can "almost" fix anything, well at least dismantle things properly.. I had a 4 stroke Ryobi back in the day that suffered a similar failure from a plastic cam melting down to round. Of course I instantly ditch it and used the excuse to buy a new 2 stoke Toro that is still going many years later. Didn't discover the real problem until my curiosity got the best of me and I took the old Ryobi apart. I was shocked to see the cam lobe was plastic and still to this day wonder what engineer thought that was a good idea. More likely to have been the result of the final design being re-engineered by the accounting department! Well done.

@arcrad

Жыл бұрын

Perhaps they make them plastic to act as a sort of mechanical fuse. The cam lobe will reliably fail first and can be easily replaced.

@nerd1000ify

Жыл бұрын

Rough machining, heat treating and grinding a hardened steel cam would probably be one of the most expensive steps in making an engine like this. The plastic is adequate for most uses (so long as you don't overheat or over rev) and way cheaper to make because it can be produced by injection moulding.

I used to work with a light 2 stroke Stihl about 30 years ago. It was a brush cutter, not a combi tool. It was great! Also the duo handle bars on that machine work way better for the long term. But maybe not that handy when using the saw 😉 Great video.

Wow huge valve movement after gear change. Thanks John, I feel like I'm in shop class watching your videos. Learn so much.

i love seeing this stuff haha! it makes me want to go out and fix everything that uses a small engine on the farm haha! thanks for taking us along on this journey!

Great video. We got a good lesson into the working of a small engine, a 🦭 and 🐄🐄🐄🐄 hanging out around a bonfire 🔥 👌

Great work! I always learn so much from you! And.. if one of those cows got much closer to the fire, y’all would have had some bbq for dinner! Thanks for all your content!

Terrific video. Well filmed. Good sound. Perfect pacing and commentary. Appropriately speeded up where needed. I don't watch many videos this long, but I learned more about these engines from this one than any other I've seen and found it absorbing from beginning to end. Thanks much for taking the time and care to make it. Subscribed!

This came out at a perfect time, my primer bowl on my FS 130R STIHL trimmer got a hole in it the last time I used it. I’m glad I didn’t use it to long. I don’t wanna melt the cam-gear!! By letting it run lean!! Thanks so much for your videos!! Thought I knew a lil bit, but learning a lot from you!! God Bless, stay safe out there!

Nice fix, the early honda gx25 engines had a similar problem when run to hot the plastic cam melted, they changed from gear driven to notched belt driven cam. Also Stihl uses they're own brand of Dirko sealant which is also orange (easily mistaken for rtv) but looking at the crankcase when you took it apart i'd say someone has been in there before, i've never seen Stihl use overkill amounts like that. When it comes to you're clutch there are crush tubes in the pivoting ends of the shoes that are frozen in place (hence clutch will only work with bolts loose) you need to free up those crush tubes in the shoes. if you leave it the way it is it will ware through the bolts and cause more damage!! Good luck with it, thanks for posting!

I have the same thermal camera but from a different brand (vevor) and I love it. Its great for electrical work and unlike older ones the refreshrate is high enough to not bother you. Only downside is that when it changes thermal range it freezes for a bit and it does that quite often.

You are one of the few I watch 100 percent start to finish!!!

Thanks for taking the time to video this. It was cool to see the breakdown and fix!

Funny, I've got roughly the same combi unit here for the house, maybe a model or 2 newer but about the same.. always wondered why it randomly misfires with a heavy load on it (usually the blower @ full throttle), now I know it's got a nylon cam that's likely worn out. Learn something new every day! Caught a little foreshadowing at the very end too 😉

@rivtool515

Жыл бұрын

Its not a misfire. That is the rev limiter kicking in.

@MacPoop

Жыл бұрын

@@rivtool515 lol 😂

They had the same issue with the Ryobi 4 stroke engines. They had plastic cams that would melt on the exhaust valve side, I still have my 32cc 4 stroke Ryobi trimmer from 2011 with an actual metal camshaft. I take very good care of it because I know I can't buy good 4 stroke trimmers anymore.

As Taryl recently said: it will all soon be batteries only. However, this was a very well made and informative video. Reminded me of when I split my first chain saw wide open and replaced the crank bearings and piston rings ... about 40 yrs ago.

I am an ASE Master Technician with decades of experience and I always learn something new watching your videos

If you think about it, the valves only opening a tiny amount, they were basically acting as an artificial throttle. It was coincidentally just enough air/fuel to idle, but that’s it. You opening the throttle on the carb changed nothing, since it simply couldn’t breathe more than it could at idle. What is odd to me is how quickly you report it happened. Maybe the cam somehow has a harder surface, and once it was compromised, the rest got lathed down really fast? Idk how that could be true with plastic, but I’m no polymer engineer, so I’ll leave it to others to figure that out.

@MrMarapro

Жыл бұрын

Probably just overheated while in use and softened the plastic.

@jeffreyyoung8727

Ай бұрын

I have heard that the 2 stroke oil should be stihl

@Technotranceism

19 күн бұрын

It's a failsafe feature. It's supposed to give you some indication of improper running, and needs maintenance. Saving on damage to the rest of the valvetrain. It's a common wear item, especially the compression relief. However, some of their 4mix engines, suffer from damage due to no rod bushings. Certain models have them, while others don't, leading to serious damage, and needing a complete engine. Which costs as much as buying a new piece of equipment. Go figure 😢

Always a good time when you've uploaded a new video. With this one I did cringe a bit the way you were turning those needle screws like there was no tomorrow 🙂 My experience is they need small adjustments, and wait a bit after each. It takes some time for the carburettor to respond. But other than that I'm impressed with the way you explain things as you discover them. Great job !

@plkracer

Жыл бұрын

The zama carbs on the 4 mix don't react to the needles much, they have a fixed jet inside, so even a half turn only has a small effect on actual fuel delivered. These aren't like the needle metered carbs on older chainsaws.

I got this also but it is so hard to pull so i better check that compression release. Didnt know where it was so thanks for the info.

This is why most people just buy a new tool. I would never get all the parts back in place and eventually end with it in the scrap pile. Thanks for the tutorial & the explanation of all the functions. The camera angle was great. I was right up in there the whole time. Thanks!

Great job and another tool saved from the land fill. I just wish they made a small prop head attachment, so I could attach it to my canoe.

Fantastic video! I love small engine repair, and being a loyal Stihl guy, this is even better!

Definitely one of the best videos published. The attention to detail is much appreciated.

It needs more attachments like: socket adapter, gas powered flashlight, exhaust to leaf blower tube, cylinder honing jig lol

@mattym8

Жыл бұрын

Nail gun, recip saw, sander… lol

I have two FS90s (one in service, one not) that have the same engine. It's highly likely that I don't have nearly the same hours on either that you have on this unit, but this sure makes me want to take them apart and check on that plastic cam. Thank you for the in-depth coverage.

@rtgirard

Жыл бұрын

@AnabelleJoan I don’t DM scammers. Go take a long walk off a short pier.

This was my first video i saw from you, i really enjoyed the detail you were going into in the disassembly and reassembly and in the troubleshooting as well. Definately worth a subscribe!

Excellent video - thanks. My main takeaway is that a key diagnostic to look out for is the engine being hard to turn over due to the compression release not working - if you have this symptom you might think it is normal and not think anything of it - that is what I did for a while as I was unaware of the compression release feature. So if you experience this then I would say it is definitely worth checking the cam - and specifically the little valve release lug shown in the video at 34:30 - and while you are at it, the valve clearances. Fixing Stihl products is a hobby of mine. My gardener has the KM130R and had the metal plate on the back of the cam detach and disintegrate into two pieces with the little weight loose in the engine...also signs of melting. Surprisingly little damege - just the mounting point for the cam on the engine block where the pin goes in was quite badly worn and scored so I cleaned it up as best I could and then placed a 0.1mm shim between the cam and the engine block. Hard to work out why the failure has occured as plenty of lube evident. I have the same model so decided to replace mine prophelactically - was worn down by 0.2mm, and the metal back plate seemed loose. (I also had a broken valve a couple of years ago, so have done the full engine tear down in the video.)

Thank you for this video, it was a pleasure to watch as always. The STIHL "4-Mix"-engine has a good reputation for being durable, small, light and powerful. The idea to get rid of all that oil-cycle-fixtures like oil pan, - pump etc. by just using 2-stroke-mixture is kind of genius. You can use the same fuel for 2- and 4-stroke-engines on your STIHL tools without the danger of damaging the 2-strokes and without the hassle of stocking different fuel cans for various tools. And the engine is lighter without the oil cycle apparatus. I think that this engine looked incrdible well for 10 years of farm use. I personally never had issues with STIHL tools, but if you want to see flimsy engineering take a look inside the cheap chinese made garden motor tools for hobbyists.... I think that the plastic cam did exactly what it was supposed to: It's the weakest point in the mechanism but on purpose, because it fails in the case of under-lubrication first, throtteling the engine down and preventing further and much more costly damage. The gasket material in the engine was surely not intentional, but maybe it was hardening out or something so that this happened after so many years.

@WJCTechyman

Жыл бұрын

I still find it interesting that some say they notice a weight difference between mini 4 stroke and 4mix or 2 stroke engines. My echo PAS2620 and Honda HSS25 are similar displacements and feel very similar in overall weight and the Honda has an oil sump and the extra mechanics to use it at different angles. The Honda is relatively well balanced and quieter to boot compared to Stihl's 4mix. Same goes for the Echo, it's a touch quieter than the Stihl.

@user-rp3ev5kz2o

Ай бұрын

My buddy that works on small engines loves the stihl 4 mix, keeps him busy

Always been a big fan of stihl products. Strange there was so much RTV in the crank but glad you were able to get it sorted out. Very interesting to watch!

Straightforward and easy to understand, great job!

Hi John I have a fs90r strimmer as well. I had problems with my cam as WELL, The housing you removed to gain access to the cam on my machine had wallowed out where the pin the cam ran on a nd the cam was knackered as well, and sticking clutch, the clutch shoes should pivot on the shoulders where the bolts go thru, the pivots are bad for seizing, thats why when you tightened the clutch shoe bolts they lock up. Your clutch bolts realy nead to be tight. These trimmers work good when all is good. KEEP UP THE GOOD FIGHT, love the vids

That worn cam lobe is probably the result of a bad batch of whatever material it's made of. Reminds me of an issue Harley Davidson had with cam chain tensioners about 20 years ago. A number of engines grenaded because of it. Great eye opening video. I've always been a Stihl fan but from your experience and what I have seen on other channels, I may be changing over to Husqvarna.

@camo8768

Жыл бұрын

Husqvarna make genuine 2 strokes, with much simpler carbs. I prefer them.

@TheGuyWhoDidUrM0M

Жыл бұрын

@@camo8768 I only wish that there were husqvarna dealers closer to me. closest one is 3 1/2 hours away. Same reason I opted to buy a 240r vs a 535ls

Interesting concept, an all position 4 stroke engine.

@Technotranceism

19 күн бұрын

Yeah, they refer to it as a proprietary 4 mix. Engine fuel and 2 stroke oil, lubricates it.

We use Stihl since at least 2001. We have multiple saws, Weadaeters/Brushcutters, hedgetrimmers and leafblowers. We never had any Stihl related problems, most of them were my dads and granddads user errors. So all in all we are quite happy with them. The biggest problem is that the plastic and rubber parts start to dissolve and dont work as intended

Thank you for the detailed video of what was causing the malfunction. I found this video very informative and really enjoyed the step by step process 👍🏻

Video came out 26 second ago but see 5 comments from 1 day ago???

@Bobbias

Жыл бұрын

Patreon early access. Video goes up unlisted, Patreon members get links, then the video gets made public later.

@sleepym8486

Жыл бұрын

​@@Bobbias I knew something like that might be happening.

I think you got a Montagsmodell from STIHL

Nice video! My decade old KM 90r just bit the dust, after watching your video, im gonna dig into it

Great video, as usual, you explain in detail. Thanks for all the work you put into your videos!

4 mix just makes things excessively complicated for no reason.

MAKE SURE you use the Sthl oil in those 4mix engines. They require special oil or you’ll wear the cam and the bearings early. There’s other videos on this subject.

@shaynewalker4519

Жыл бұрын

Lies. Oil and fuel is just that. Higher or lower octanes and more or less oil is really the only differences you can make. Stihl oil when burnt burns almost to like a yellow o believe so if you use a different kind of oil in it when they check your warranty they look to see the oil you've been using has been burning yellow in the exhaust/muffler. They don't add some special additives or nothing it's just marketing.

@Steve_Just_Steve

Жыл бұрын

@@shaynewalker4519 Maybe, but working on my BR600 is such a PIA, I'll use it on the chance it makes a difference.

@shaynewalker4519

Жыл бұрын

@Steve just Steve never use ethanol gas and use 91 when mixing and you'll never have any issues starting or running and it can sit all winter pick it up next summer it'll fire right up. Non ethanol gas doesn't break down like corn gas does. And your fuel lines won't get brittle.

@frogcassady

Жыл бұрын

@@shaynewalker4519 it’s actually is very true. The 4 mix engines require some wear additives in the oil to help lubricate the piston pin bearing which in that engine is a normal bushing, not a needle bearing. It also needs the additives to prevent wear on the cam shaft. You are correct about the non ethanol gas though. My cheap Ryobi string trimmer starts on the first pull with ethanol free gas.

@nichenjie

8 ай бұрын

Which specific type of Stihl oil do you recommend for those 4mix engines?

Thank you! I need to service my own KM, this video is GOLDEN!

100 % agree with you about making your own , you definetly have the skill-set. It would make a good video too. I own the same weed eater/saw/bush cutter and would love to learn how to make my own. Certainly would make it last a lifetime. Awesome video. Please keep em coming.

Yes I think Sthil quality is definitely going downhill recently. They want to decrease costs and raise prices in the last couple years. Hope they can turn it around and get back on track but they may be headed for a downfall like so many other brands have fallen victim too due to greed.

You can point the temp indicator at the wife first thing in the morning to tell how your day is going.

@ebutuoyebutouy

Жыл бұрын

Lol +1!!!

Great video as usual. I have the Kombi 94R and learned a lot about how these work. Thanks much for the entertainment and education!

@action2249

Жыл бұрын

Different engine unit no cam gear or valves

Really enjoyed this video. You're definitely a talented mechanic. Luv the cow scene and especially the ending with the drone. Keep'em coming! 😊

Plastic cam, that's disappointing

@gerry343

Жыл бұрын

But cheap!

@nostromo526

Жыл бұрын

Unless as he mentioned plastic was used on purpose to make this the sacrificial part. It will fail first before any other part is damaged thus protecting the whole engine. Plus it is easy to replace. Only issue if they are jerks and charge an arm and a leg for the replacement part when they DESIGNED it to break.

@JCWren

Жыл бұрын

@@nostromo526 People just seem to assume that because something is plastic that it was made to be cheap, rather than for some other reason. Same people probably think the shear pins in the collapsible steering shafts should be steel instead of soft plastic :)

You have helped me have a better understanding of how engines and that thermometer work,, Your a great teacher,,,,,

Very informative. Thank you sir. As a veteran landscaper I recommend taking the guard off for longer string, better access, less weight and much faster work. Ive used the Stihl 110' and 111's for a long time but a couple of years ago switched to echo 2620 model and wont be going back to Stihl. Much smoother trimmer.

I learnt a few things and was entertained, thanks for the video and the effort you put in to make it so good.

The second time I saw this. I am fascinated with the 4 cycle engine, but using two-stroke fuel!!! I used to teach small gas engine repair in a Middle School. I never saw students (who usually did poorly inside the school in their regular classes), but gave full attention to their own old engine piles outside. Never ceased to get the parts together and running.

I have been using anaerobic gasket maker for years. Glad to see someone else using it. Good video 👏👏

Great video as always. Thank you for turning down the volume on the noisey parts

Great video! I have a Stihl 2stroke brush cutter but have just recommended a four stroke to a friend but with reservations because of that cam wheel. Not a big deal to replace though and your 'explain as you go' style is very user friendly! :)

Interesting to see one of those little Stihl 4 mix motors disassembled. I’ll keep my Stihl 2 strokes! Also I love the new thermal imager you showed using your lift to demonstrate. 👍🏻

Love the channel John, I appreciate the way in which you explain the lingo and what you are doing. 👏🏻👏🏻👏🏻

That was really good! A lot of work editing so well. Thank you!

Brilliantly clear tear-down / rebuild video!

You covered all elements of the system except the spark/mag. Very well done through video.

27:17 This is a first for me! The cows are having a bonfire. Stay warm, girls.

hey man love learning about the small engines- I've always been intimidated by them! Thanks for sharing!

Thanks. I've got a few engines of that sort. Always learn something useful.

I must say sir I learned a lot watching that video thank you never even seen the inside of a small engine like that before

Great video! I was surprised to see that RTV in the engine. I bought a new FS90R years ago and after 2 years, it quit running. I also found RTV in the engine, holding the valves open. Cleaned it out and it ran for a while, then quit again. Took it apart and found more RTV. Cleaned it a second time and then got rid of it and went back to my Redmax trimmer from the 1980’s. I thought my experience was a fluke, but I guess not. Thanks for sharing!

I can’t tell you how much I enjoy watching your videos. This was great!

Good job finding and fixing the problems. Better now than when it was new !!

Love the cows just chilling at the brush pile fire 😊 They can be quite curious

The issue with your clutch is that the bushings in the shoes are seized. Press out, clean corrosion, little lubricant on bushings, reassemble, torque bolts fully.

awesome video, you've inspired me to finally see about fixing my ol Stihl weedeater.

I bought a KM131 combi last year, i like it a lot and found the attachments from my old craftsman combi system fit it well enough.

Good Video. Great seeing that small engine teardown and fix.