Is it Time to Replace My Brakes?
Автокөліктер мен көлік құралдары
For More Info visit us at: 1aau.to/h/cIV/
That "wubba-wubba" or "scritch-scritch" sound could be a wheel hub, but it could also be severely worn brake pads, warped rotors, or both! Join Len in this #shorts diagnostic to see what needs to be replaced!
Check out more awesome diagnostic videos here:
• Driveway Diagnostics!
For More Info visit us at 1aau.to/h/cIV/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Пікірлер: 74
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
You need front brakes?? You need rotors dude! LoL
@ex8280
Жыл бұрын
yeah, that rotor looked toast.
" we can resurface those for $265"
U need the whole setup, pads, rotors, 🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️
They’ll be back within the next hour with the same complaint
Bro that rotor is gone 🤣
This video deserves 1 million of likes. Everything that we want, a short video with very simple and direct information.
Been watching you videos for long time your an great mechanic always know what to do 🔥🔥🔥🇺🇸
AND ROTOR. I just kept waiting for it to be said..
04 Tahoe : my pedal makes a sqeek sound when I release the brake pedal and turn off the car. Like a suction release from drum. Already bleed and new Dot 3.
I replaced my rotors and pads fine went to shop for my tyrod weeks later it wobbles slowing down from 40 down. Might need weights on my rims I think they fell off
Great work guys
No mention of greasing the caliper pins?????
Uh what about those rotors lol
Great video thanks
Wow that is exactly my car sounds! But my brakes are almost new...
😂 He was driving that........... Scary always great content!
@1AAuto
8 ай бұрын
+Frank Spirk Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
If your brake shoes look good what is the minimum thickness before replacement? Thanks
Vids on leaky seals into the cabin? Got them everywhere.
Was it time for the brake disks aswell?
I've done that - it happens!
your the man
Holy crap. Make sure your caliper piston moves back freely. And the caliper pines move freely
Am facing this noise plus steering and body vibration while braking in high speed ! So do I need to replace both rotor and brake pads ?
How do you get the cars to work on ?
How to resurface your own rotors 101
Rotors are good?
Mine as well change the rotor too or get it shave at least.
It took all that to figure out it needs brakes could’ve just look through the wheel and saw the rotor dead giveaway lol
Mine started speaking 3 weeks ago. Prolly just need pads?
What about the rotors? When metal is literally scratching up and destroying your rotor.. wouldn't you change that alongside the brake pads?
Hey that rotor looks horrible. You are gonna change them too?
@ex8280
Жыл бұрын
As long as it's not warp, it should be okay. But it might eat up the new brake pads quick.
Is it true thats it is best to change front & back breaks together?
@mitchallen5819
Жыл бұрын
AWD/4WD probably. Typically it's like tires, driver and passenger at the same time. Unless you can find a tire with the same tread depth as the opposite side. , but even then it's best to do both side. When it comes to brakes specifically, all 4 should be checked at the least.
The whole brake system needs replacing 😢, I would you know
Hi if there is any professional mechanic here, I have a question, I have a 2012 honda civic and my car always makes this noise from the rear right wheel and I got the rotors, pads, caliber changed on both rear wheels but the thing is after getting those things replaced It hardly runs smooth 2 weeks and then the same issue is happening, in the warranty I got the parts changed 4 times!!, and now I have the same noise again, I went to a different mechanic and he just changed the brake pads as this guy in the video did, but still the noise is there. Kindly tell me what can I do? A good professional advice will really help me alot,Thanks🙏🏻
don't forget to true the rotors- even new ones
Don't forget to replace the rotors first.
Bloody hack pads and rotors needed mate definitely not safe to drive 3 points and fine and cars seize would be in UK..
Question.. if a car is is FWD or RWD is there only 2 sets of brakes?. And for AWD does that mean there are more brake pads needed?
@1AAuto
6 ай бұрын
+@EthansSoccerHour The 2WD and AWD models will use the same amount of brake pads for each wheel.
Rotor too that thing was junked
For anyone watching this wanting to change brakes, IF YOU BRAKE PADS EVER WEAR ALL THE WAY DOWN TOUCHING METAL TO METAL WITH THE ROTOR, YOU NEED TO BUY NEW ROTORS. YOU CANT BUY NEW BRAKES PADS AND USE ON AN UNBALANCED SHIT ROTOR THAT IS ALREADY WORN OUT. If you fuck up your brakes and the brakes fuck up your rotors now you need to buy brakes and rotors. Don’t forgot about inspecting the caliper
How
Nah they need a whole overhaul, it looks like they live up north where its treated roads.
Why didn't he mention the rotors, i just changed my brakes and it looked like his, the mechanic said i need new rotors too but I'm out of money, he replaced the brakes it isnt doing anything unusual yet so i don't know?
Rotor us bad also
Need signs ? Right too change brake pads
Those rotors are trashed
Vreeeeeeeeeeeeeehical
Don't forget the rotors my dude🙄
What about when rotors need replaced? I've kept my break calipers changed and my new mechanic says my rotors need replaced is they a video you have for that?
@samuelw4492
2 жыл бұрын
They do need replaced or re surfaced if they are not a smooth surface anymore
@gameu48709625
2 жыл бұрын
You should always change both the rotors and the brake pads at the same time , having new pads but running old rotor can shorten the life of a brake pads by a lot cause rotors can be worn out just like the pads
@andries4561
Жыл бұрын
@@gameu48709625 no ones gonna do that, new pads with a new rotor okay but no one will change the rotor everytime they do pads
@ex8280
Жыл бұрын
@@gameu48709625 technically it's every other time you change brake pad. But I just changed mine after 5 sets of brakes and at 200K. Never resurfaced them or replaced them. It finally started making a funny noise, so I finally changed everything including the fluids.
When you were driving it and you said oh no, what was it that made you say that?
@ysmi1r_160
2 жыл бұрын
It was the grinding noise of the brake pads grinding away on the brake rotor as he pressed the brakes dowm
Noise!? Just turn up the music. Duh
Caliper looks good? 😂😂😂 looks rusted as hell man 😂
😅
The disk rotors are rotted.
Exactly what my cat is doing
@1AAuto
7 ай бұрын
+@to.lame.to.function5242 Thanks for the feedback!
Verical? First person in my life I have ever heard say that. Lol so weird because you say everything else proper.
Them rotors are trash
What about break drums ?
@mitchallen5819
Жыл бұрын
Could be a bad bearing. Or something loose inside the drum.
@jeffomelenik1013
Жыл бұрын
Brake ,Not Break as in coffee