Is It Better To Spray Or Roll On Concrete Sealer? CoverShield U140® FAQ Video - CoverTec Products

Is It Better To Spray Or Roll-On Concrete Sealer?
- www.covertecproducts.com/prod...
Is a better to apply concrete sealer by spray or by roller.
While important thing is to make sure that we don't apply the sealer too thick, particularly if it's a topical sealer.
The seal if it's too thick, it won't dry properly will remain soft, sensitive to moisture, it won't develop its physical properties, it's going to fail prematurely.
If it's a penetrating field, a sealer, you apply it too thick, it may not soak in the a lot of it sits on the surface and you need to clean remove that from the surface otherwise it will leave streaks.
So we want to control the thickness and I recommend spraying a sealer to do that control it much better than using a roller.
So using a pump up sprayer, garden sprayer or backpack sprayer, something that provides you know around 40 PSI pressure is an excellent way of applying a concrete sealer.
You could control the thickness you can if you're doing a larger project, contract or you can use airless equipment that will allow you to pump more material over a large area faster.
So I would definitely recommend spraying over rolling if you have to roll perhaps you've got a lot of texture and a roller benefits you more than a using a good microfiber rollers.
What I recommend something like a three eight nap and use that to spread out the sealer.
Again, we're not trying to apply it in a thick coat.
If it's a topical sealer, you're better to do two or three thin coats than one or two heavy coats.
CoverShield U140® is a long lasting Gas And Oil Resistant Concrete Sealer.
It’s a two-part, water-based polyurethane clear concrete sealer.
It’s highly resistant to motor oil, engine oil, gas, brake fluid, chemical stains, and heavy traffic.
It leaves an attractive look after application to a concrete surface.
It’s a cost-effective solution for auto shops, warehouses, pole barns, and factory flooring.
Click the link to learn more about CoverShield U140®
- www.covertecproducts.com/prod...
Charles Idowu
Technical Director
10821 NW 50th Street Sunrise Fl 33351
Phone: 888-580-0693
Fax: 754-223-2467
Email: service@covertecproducts.com
www.covertecproducts.com
Monday - Friday 8:30am - 4:30pm

Пікірлер