Thank God for men like this

I get nervous watching these guy’s work, unbelievable how they do this every day, the real heroes putting their life on the line

I hung iron for a couple of years when I was in my late twenties, then moved on to millwrighting. Love your videos because they make me feel young again. Basically the same stuff I did, low rise, 4-10 stories.

@chicagomikey6416

Жыл бұрын

I can relate... did millwright/ boilermaker then moved on to pipefitting. I started working in oil refineries and seen pipefitters and welders making more money I ran with it.

@bradhaines3142

Жыл бұрын

i went from millwright to turbine mechanic, less varied work but better seasons. this shit terrifies me lol, i hate heights

My stomach turns watching these videos. I'd fall probably lol.

The sitting and making the connection...Doable. But walking across joists, girders and beams...HELLLLLLLL NOOOOOOOO I get dizzy just looking down!

@bradhaines3142

Жыл бұрын

im laying in bed scooting back like NOPENOPENOPE

I love how the beams are all wet and slippery looking

@bradhaines3142

Жыл бұрын

haha. looking. right. this is why you buy good boots

must have been an ironworker who spelt the title

@cristianvalle4123

4 жыл бұрын

Spelled

@roscoep.coltraine6344

3 жыл бұрын

@@cristianvalle4123 he spellted it lots more gooder then most da fellers

@scottsrfun

3 жыл бұрын

I didn't know how to spell iron worker now i r 1

@jolanni7

2 жыл бұрын

Ironworking is more importanter than an education. Ha ha ha love this shit.

@dougfunny9772

2 жыл бұрын

Lol spelt?

my palms sweat watching this shit. Crazy how those heavy beams float in like that.

@bradhaines3142

Жыл бұрын

no joke as long as it's floating you can move hundreds of tons with a gentle nudge. the biggest problem is when its moving too fast, it'll yeet you into the next zip code if it doesnt squash you flat

thanks for building the country that I live in and enjoy.

Great camera shots, you feel like the bolts are in ya palm !

Great video 📹 👍

Great work.

My feet tingle watching these vids

Union or Non?

Looks scary!

too bad yt is not recomending this video to more people.. the lastest two coments were 1 and 6 days ago

Good work definitely

7:27 there's that fall arrest

@masonmartindale6956

Жыл бұрын

Finally 😬

Do all iron workers have small feet, and do crane operators have a chalk board for crushed hands they have caused ???

@scottsrfun

3 жыл бұрын

be extremely careful of crane operator's, I know Local #27

@nickknapp1421

2 жыл бұрын

Yes

I couldn't do it, I hate heights. I'll crawl into any hole or ditch no matter how deep or confined the space is but I ain't doin that.

I do residential framing for living..but now I wanna do a man's work like this where do I start?

@bradhaines3142

Жыл бұрын

union near you, might even be hiring. if you live in the south DONT DO IT, unions are shit in the south. i learned that the hard way. up north this is a solid 40+/hr

Holding on to a Bleu little bucket😅

One of the most frustrating part of Iron Working is when you signal the crane operator to boom down and hold the load , and he doesn't know how to do it !

I'm about to work as an Steel Erector at Saudi Arabia next month.☺️

@Atylonisus

Жыл бұрын

Make sure no one takes your passport once you're there.

@durchfaII

Жыл бұрын

I wish you the best for your safety (not just the ironworking part)

Obviously spelling isn't mandatory for Ironwokering....LMFAO.

Do you use a harness and if you do, any chance we can see your tie off procedure?

@janglenapper

Жыл бұрын

found the OSHA plant

@synthfamous

Жыл бұрын

@@janglenapper 😂😂😂😂🤣 your right that was mad suspect

@dainblaine4146

Жыл бұрын

He needs to tie off

My God these are slow why so many connecting bolts?

Must be first time connecting

@ahanuabedanu6798

4 жыл бұрын

I think so haha

Do you always put 2 bolts in and tighten them? 1 bolt and go

@davehartnett2901

4 жыл бұрын

george lashomb you can’t always one bolt it for big iron and certain types. Some of it can have the potential to roll.

@seanmcconnell5326

Жыл бұрын

OSHA requires 2 my guy

@bradhaines3142

Жыл бұрын

1 holds the weight 2 keep it in place

What monthly salary do they get?

@bradhaines3142

Жыл бұрын

they're paid by the hour, long hours. it depends if they only get time and a half or double time but id ballpark them in the 15-20k/month range you can calculate the minimum based on 40/hr. assuming 12hr days 7 days a week thats 40hrs straight time (1.0) and 44hrs time and a half (1.5x) taxes vary wildly but figure an easy 35% off for that

One connector? Rat?

Respect it takes big balls to do this work, iknow iv done it and loved it

@Torq-wy2cr

3 жыл бұрын

Yeah ok pussy.

@chaos9447

2 жыл бұрын

Prove IT......

Красиво работает! Страшно смотреть...

When two iron wokers get on you tube.. stay gold pony boys

Kinda slow ain't cha?

If you have a thing about heights, it’s not for you. Otherwise it’s really not that hard. The camera gives it a weird vertigo look. Totally unsurprised at the video title.

I wouldn't Christmas tree iron of that length . dangerous, could helicopter and knock you in the hole.but now I see it was just intermediates.so...

I fell asleep watching this. Spelling alone was click bait.this is union local 7 Boston. sad just sad as I cry

Kia ora..this be iron woking or iron working..man get it right..or is dat 'you'.. wrong taital!?!?well anywayz..use to fabricate dem beam's an install on site.. awesome to have a Trade carrier, all credit an respect to those who are/were good tutor's/ instructor's .. awesome to see/watch with a 'coldie' ..thank you 🦾✌️fond memories to cherish..praise The Good Lord, amen 🦾 🙏 thnx Gerry Martin..but be 'there' or be square..!?!?' nice vid though.. cheerz

I about fell asleep watching, so slow

@shaunhill1358

4 жыл бұрын

Yes no shit that terrible

Going second and getting loose? Man, you are dragging your ‘partner’.

These guys are slow. And did you see his knee pads? Lol non-union for sure. Milk this job for a year at this rate

@chicagomikey6416

Жыл бұрын

Lol... I've watched a few of this dudes videos and the first thing I thought was how slow they are, then noticed he wears them knee pads ... then seen he pulls out his spud or bar for every single connection. I'd like to know the company name. I'd be a employee of the month if speed is their standard.

These guys stink

My Heros

Its the WOKE side of the iron