iPhone XR Charging Port Replacement | Logic Board
Тәжірибелік нұсқаулар және стиль
Replacing a broken/not working/not responding charging/charger port flex cable on iPhone XR mobile phone.
Compatible Replacement parts - bit.ly/42rY1bJ (USA/AU/Global)
For the logic board replacement, Follow up to logic board removal step and reverse the step back for installation (removal 04:50 - installation - 09:00)
Tools
Heat Mat bit.ly/3BvpFHm
Portable Heat Gun|Stations bit.ly/44Y5NLp
Premium Screwdrivers bit.ly/3DvLfOH
Premium Screwdriver| Repair tool Sets bit.ly/43JyWJl Silicone Repair Mat bit.ly/3FKUc6K
Glue | Adhesive bit.ly/3Dw2X4C
Clamps & Essentials bit.ly/3Qvm3Qf
Guides you May Like
iPhone XR Battery Replacement • iPhone XR Battery Repl...
Google Pixel 3a XL Battery Replacement • Google Pixel 3a XL Bat...
Galaxy A71 5G Battery Replacement • Samsung galaxy A71 5G ...
iPad Air 2 Screen Replacement • iPad Air 2 Screen Repl...
If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us to create more variety of content for the community.
KZread Join bit.ly/3O7X5SH
Our Partners
bit.ly/2FSFTPv ( Gadgets & Accessory Store - Ships Worldwide)
bit.ly/2QRfYhP ( Phone & Tablet Replacement Parts - Ships Worldwide )
bit.ly/3afejcf ( Phone, Tablet Parts & Accessory Store in The UK )
Timestamps
00:00 Intro
00:10 Opening iPhone XR
00:45 Removing Front Screen Assembly
03:12 Removing the Sim Card Tray
03:25 Removing the Sim card reader
03:43 Removing the bracket
04:10 Removing the Taptic Engine
04:35 Removing the Speaker Buzzer
04:50 Removing the Logic Board
05:50 Removing not working iPhone xr charging port flex
07:55 Placing the New iPhone Xr charging port
09:00 Installing the Logic Board
10:32 Placing the speaker buzzer
10:55 Installing the Taptic Engine
11:40 Placing the Antenna bracket
12:35 Placing sim card flex & tray
13:15 Frame Adhesive
14:00 Installing & Testing LCD Assembly
16:30 Closing iPhone XR
Royalty-free music - eoun.com
Пікірлер: 31
Bruh im a repair tech and this video was PERFECT. straight to the point. Liked and subscribed. Thank you! o7
@DIYGeardo
2 ай бұрын
Thanks for the support
Good video thanks! I would say disconnect battery first before even unplugging screen plugs. This is to ensure no short circuit can occur. Also be very careful suing metal tweezers around the microphone
thanks for this brother love and respect
@DIYGeardo
2 ай бұрын
My pleasure!
What screw driver did you use for the motherboard
Very good clear instructions ☺
@DIYGeardo
Жыл бұрын
Glad you liked it
Thank you Sir
@DIYGeardo
10 ай бұрын
Most welcome
Thanks 🙏
@DIYGeardo
Жыл бұрын
You’re welcome 😊
Face id still works if i performed this sir?
@DIYGeardo
3 ай бұрын
Yes
Hi, can we test the new flex just by connecting in the board and without actually removing the original flex? So we know the problem is with the old flex!
@DIYGeardo
2 жыл бұрын
Yes you can, simply disconnect the charging port cable and battery connector cable, Then connect the new charging cable and the battery plug. Connect the charger and test your new flex. check the video below, this is on XS Max kzread.info/dash/bejne/ZJ6Jq8-gYZmbYtI.html
@abhijithazarika6096
2 жыл бұрын
@@DIYGeardo thank you. That really helped
can a iphone 11 spare phone charger port be used for an iphone xr?
@DIYGeardo
2 жыл бұрын
not compatible
I replaced charging port and battery. I heated phone by placing a cloth on a frypan and heating over low heat. I would recommend using good quality tools, rather than the cheap ones, (I used), included with the replacement parts. Keep track of the screws; they are tiny and all different. Overall the repair was a success but Face ID doesn't work anymore.
@heavysha1886
3 ай бұрын
Whyy
@heavysha1886
3 ай бұрын
Face id what happened?
How did you remove the screw near the one sim tray at 3:28 its not a philips head and you removed it with a philips???? Im also looking at it right now and its NOT A PHILIP SCREW ITS JUST A CIRCLE HEAD!!!!!!!
@marcushernandez5525
10 ай бұрын
Did you resolve this? Lol
Is it vibration ribbon too?
@DIYGeardo
Жыл бұрын
Sorry, what do you mean?
@faazahmed4630
Жыл бұрын
@@DIYGeardo in this ribbon vibration port also attached?
how much it cost
@DIYGeardo
Жыл бұрын
The part is about $20-30
uh, what the hell is going on from 13:15-14:00?
@DIYGeardo
5 ай бұрын
Placing the frame adhesive