This video saved me! Thank you.

@DIYGeardo

Жыл бұрын

Great 🙏

Great Video Thank you! My phone did not immediatly turn back on after the repair but i plugged it in and it turned on after that.

@DIYGeardo

8 ай бұрын

Great to hear! 🙏

Hi! Thanks for the video! I had panic error on mic1, so I did replace the charging flex cable and port on my iphone SE 2 but it gave me mixed signals: first it was still restarting every three minutes, then it worked with no restart for more than an hour, then restarts and then every three minutes again, then works for 30 mins, then restarting every three minutes again. I havent done anything particular to it in the meanwhile. Would you have any next step to advise to sort this out? Thank you

Worked! amazing.Thnaks

@DIYGeardo

2 жыл бұрын

Great.. Welcome

@stillamitchinmybook6320

Жыл бұрын

Dam Idk.. I did a screen replacement in my old iPhone 5 and it was a little something something to it.. to make it easier I left me thumbprint reader in the broken screen just to save one step.. this one seem a little much… like he just kept taking stuff out amd taking stuff out….. and this is my main phone… I would be more inclined if I was already into a new phone and there wasn’t much consequence..

Great step by step replaced mine and all good 👌

@DIYGeardo

2 ай бұрын

Good to hear

Hi, why does the camera and other parts at top need to be removed to replace port?

Thanks

@DIYGeardo

Жыл бұрын

You are welcome 🙏

It’s ok I see another video they manage to slide new part under logic board. Still your video good thanks very informative.

@DIYGeardo

8 ай бұрын

No problem 👍different ways are there

Its the same part charge with ip 8?

Do you need the heat gun for this replacement? Not seeing it used in the video unless I'm missing something?

@DIYGeardo

Жыл бұрын

Well always good to have a heat gun.Sometimes you will need to soften the adhesive. You can use to soften the charging port flex adhesive. It is is not a must, but good to have it.

What brand what chargeing port i should buy ? I mean what brand and name of the new changeing port ? Please ans it will help me a lot

@DIYGeardo

Жыл бұрын

You mean the cable or actual part?

@sundaylover7786

Жыл бұрын

@@DIYGeardo u remove the old part and then put the new iphone chargeing port ....i want to know the new changeing port brand name...is it 3rd party charging port ???

@DIYGeardo

Жыл бұрын

@@sundaylover7786 there is no brand name for parts, there is original, used or aftermarket ones..your location? The one we replaced was an original

@sundaylover7786

Жыл бұрын

@@DIYGeardo ohhh sir.. i am from India....can u suggest me any 3rd party good chargeing port for apple se 2020.. I want to replace it

very clearly explained thx

@DIYGeardo

Жыл бұрын

Thank you 🙏

Top screw on plate near Taptic Engine is a type none of these tools fit

will i lose my data if i get it fixed like this by someone else? need serious help as I have not backed up my phone in long and will lose many photos if that's the case

@DIYGeardo

Жыл бұрын

I mean by replacing the charging port you won’t loose any data. But if someone damage to the board then there will be an issue. But that is very rare. Also you can use a wireless charger to charge the phone to backup the data.

The speaker buzzer , it only works on right side when facing front screen ? Because no sound coming from left side

@christianmichael4020

11 ай бұрын

Yeah there’s no left side speaker. Once they put the aux port on that side with the iPhone 5 that was the dead giveaway for me, if you haven’t already looked it up.

@lukasky_dj

11 ай бұрын

@@christianmichael4020 ip7 had a speaker on left im surprised se only has one

my iphone se(2020) keeps restarting every 2-3min after new charging flex. please help

@DIYGeardo

2 жыл бұрын

Means your charging port have issues. You need to try another one. This is most likely issue.

@LFROVI

7 ай бұрын

Não é original?

Do I need to remove the microphone off the old board/flex how does it come with Microphone my microphone is not working

@DIYGeardo

10 ай бұрын

It’s on the charging port flex, best option is to change the charging port flex

Dam Idk.. I did a screen replacement in my old iPhone 5 and it was a little something something to it.. to make it easier I left me thumbprint reader in the broken screen just to save one step.. this one seem a little much… like he just kept taking stuff out amd taking stuff out….. and this is my main phone… I would be more inclined if I was already into a new phone and there wasn’t much consequence..

Are the screws all the same size?

@DIYGeardo

Жыл бұрын

No, not same

Before I try this is there a chance I can be locked out from my phone?

@DIYGeardo

Жыл бұрын

What do you mean by locked out?

Hello, this works for the 3 minute reboot problem?

@DIYGeardo

Жыл бұрын

Did you do any repairs recently?

@sakisnikitaras

Жыл бұрын

Same for me even after 6 different docks I have problem and keep restarting after 3 minutes

@mgomez5606

Жыл бұрын

You replaced you charge port and problem went away?

@sakisnikitaras

Жыл бұрын

@@mgomez5606 For me nothing fixed my issue so I stopped trying

@mgomez5606

Жыл бұрын

@Sakis Nikitaras Does your charge port work? I saw a video and if your charge port is bad it causes it to reboot every 3 minutes. Mine does not charge thru port, only wireless. I will let you know.

Can I replace with a non OEM charging port flex

@DIYGeardo

2 жыл бұрын

Yeah

@nmgunfighter8151

2 жыл бұрын

Suggest me a charging port

Sir, will I get any errors on phone for replacing charge port?

@DIYGeardo

Жыл бұрын

Nope

@mgomez5606

Жыл бұрын

@@DIYGeardo Geardo, when you replace battery. How do you reset battery health on this phone?

@DIYGeardo

Жыл бұрын

@@mgomez5606 for that you need to place the old battery board, if not a genuine battery

@mgomez5606

Жыл бұрын

@@DIYGeardo what if I just replace battery. What messages will I get, Geardo?

Hi thanks very much for a very informative Video. I was wondering if you could help me with this problem. I have a iPhone SE 2020 there is a small square bracket on the main logic board between the board and the tapic engine. I would like to know its function, there is an electrical contact point on it but it doesn’t seem to touch ground or any other electrical point. there is a ribbon from the charging port that sits on the tapic engine then this bracket sits on top and then it is screwed into place Could you please enlighten me….thanks in advance Cliff

@DIYGeardo

Жыл бұрын

Is there any way you can send us a photo

Replaced the charge port and now it don't come on or charge. Not even wirelessly it won't charge

@mgomez5606

Жыл бұрын

I took it to shop and they checked it and was not drawing any amperage. I checked battery with multimeter and it was dead. Ordered new battery from Amazon. Hoping for the good.

How much does it cost bro

@DIYGeardo

8 ай бұрын

About $20-30

6:20 son of a gonna i pull the tab right above the flex and broke it what is that for . should i even finish. or did i facked up my phone.

@DIYGeardo

Жыл бұрын

I think you broken the charging port connector? what is the part you are trying to replace?

Removing the logic board is unnecessary

Hi

@DIYGeardo

2 жыл бұрын

🖐

so broke my iphone😅

@DIYGeardo

3 ай бұрын

What do you mean?

You don’t have to remove the logic board to replace the charging port and mic. This is a tortuous guide

@jdrs4214

3 ай бұрын

Yes you do!!!! Otherwise, how the hell are you gonna peel the lightning connector flex board unit from the chassis. The motherboard sits right on top of the lighting port unit. Rewatch the video & learn.

Insta id ? Sir !