No music version re-post as requested kzread.info/dash/bejne/rI5klrWKZKWraM4.html

best tutorial, thanks bro!

thanks for the video guide, after i got the screen off initially and seen the plate I stopped and was like ok im gonna watch a howto on this one lol.

THanks for the video!

Excellent information, great jib

Great video!

Awesome

Thank you for this , recently my 14pros screen went white after a little tumble it took . The screen touch still works I’m able to unlock it if I know where the buttons are but the screen is still white. Some say maybe its connection became undone or something along those lines. Wish me luck your video was simple and sweet . 🍻

@worthitrepairsbymark

4 ай бұрын

kzread.info/dash/bejne/fKeLlLSmdMqrXag.html Please watch my iPhone 14 Pro Video it is very much different

what are the gold contacts on the back of the screen for?

@worthitrepairsbymark

3 ай бұрын

Some sort of antenna

Did the face id work with the new Display?

@worthitrepairsbymark

4 ай бұрын

Yes

Does it require any solder work? Like the whole faceid issue

@worthitrepairsbymark

11 ай бұрын

No

Is there any True Tone / Auto brightness fix?

@worthitrepairsbymark

Жыл бұрын

There is not a way yet but I’m sure the Chinese will figure it out in a few years

what you used to seal display

@worthitrepairsbymark

5 ай бұрын

Precut adhesive or just T700 liquid adhesive

What screwdrivers set you got ? And why did you place the blue film material inside ( then remove it ) ?

@worthitrepairsbymark

7 ай бұрын

I would have to look up the brand of driver I can't remember what ones they are. The blue film has adhesive on the edges that you stick back down so the screen is waterproofed also won't fall off or cause dust to get into the phone making the camera dirty or blurry.

@paulstir

7 ай бұрын

@@worthitrepairsbymark thank you for your reply, I would like a good set of drivers if you can please post the brand

@voltorb433

Ай бұрын

​@@paulstir 2uul is the brand I use em every day in work they are the best

Were can I get a new screen for iPhone 14 pro max?

@worthitrepairsbymark

Жыл бұрын

www.mobilesentrix.com/replacement-parts/apple/iphone-parts/iphone-14-pro-max

Where could one get the tool.kit set at ?

@worthitrepairsbymark

Ай бұрын

It’s in the description

What about the previous adhesive

@worthitrepairsbymark

3 ай бұрын

You can either replace the adhesive or reuse it but you defiantly want to have adhesive.

Where did you purchase the screen ?

@worthitrepairsbymark

3 ай бұрын

Injuredgadgets.com

can you do with out heating screen and what do you use to heat

@worthitrepairsbymark

Жыл бұрын

I've used a hair dryer before. I mean you prob could but I am sure its a b*

How long do you heat the screen up for? Also what temperature? Thank you out

@worthitrepairsbymark

5 ай бұрын

83c 10 minutes

@nathanhuitson1418

5 ай бұрын

Thank you, I manage to get it off, how does the Face ID work on the iphone 14? I have the old screen which is no good, but have a genuine apple screen to replace it, do I need to take the senor of the back of the old screen?

@worthitrepairsbymark

5 ай бұрын

@@nathanhuitson1418 yes you will need to take the part off old screen and place it on the new screen

@nathanhuitson1418

5 ай бұрын

Cheers mate, will it come up saying unknown part?

@worthitrepairsbymark

5 ай бұрын

@@nathanhuitson1418 the screen will

So the iphone 14 and iphone 14 plus, you'd have to disconnect the battery from opening the black glass?

@worthitrepairsbymark

7 ай бұрын

You have to open back glass to disconnect battery

@moelester8815

7 ай бұрын

@@worthitrepairsbymark is that just for the iphone 14 and iphone 14 plus?

@worthitrepairsbymark

7 ай бұрын

@@moelester8815 yes

Lol I broke the sensor great

@worthitrepairsbymark

19 күн бұрын

Happens to the best of us. It's a pain in the butt to get off just gotta be patient and not force it off I've always learned if I feel rushed I will mess it up.

so do you have to undo the battery?

@worthitrepairsbymark

8 ай бұрын

If you can’t get it to turn off yes

Does face id work?

@worthitrepairsbymark

5 ай бұрын

Yes unless you break proximity sensor taking it off old screen.

Where did you get your replacement screen?

@worthitrepairsbymark

2 ай бұрын

Mobile sentrix

How do you disconnect the battery?

@worthitrepairsbymark

9 күн бұрын

You take off the back but just do screen and a force restart at end of connecting it and it should work

@RedMissileGaming

7 күн бұрын

@@worthitrepairsbymark yeah, I figured it out 2 seconds after posting the comment. The 14 Pro Max isn't like that. First time I've worked on a regular 14. Super weird.

@RedMissileGaming

7 күн бұрын

@@worthitrepairsbymark are you not worried about damaging the motherboard from connecting a new screen without disconnecting the battery first? Or did they build these phones differently?

@worthitrepairsbymark

7 күн бұрын

@@RedMissileGaming It does worry me. I would take off the back honestly and unplug the battery to be safe. I have done it the other way though by mistake turned it on during repair and didn't notice until the screen was connected and not working so I had to do a force restart and it worked.

So you didn’t unplug the battery?

@worthitrepairsbymark

Жыл бұрын

I shut down the phone and actually rebooted phone with force restart and it worked. But if you can't get it to shut off I actually have done it without unplugging battery and did force restart and took my hands off buttons before the screen lit up again and it stayed off and did a force restart and it worked with new screen. Most the time I unplug battery 1st but from what I learned on ifixit they do not unplug battery on there guide for this phone

When replacing screen of the 13 -13 pro max and 14-14pro max do they lose face id? I'm fixing to start repairing this screens that's why I'm asking and to let customers know.

@LucasScottMusic

6 ай бұрын

Did you find out that answer?

@lawandasentall4959

6 ай бұрын

I got my screen replaced at a repair shop about 5 months ago. My face ID didn't work anymore, my sound was going in and out for weeks, my phone started overheating and moving slow even when not on the charger, I started getting black ink spots in the screen and it now has completely blacked out. It's so stressful!!

@tonysoprano8481

4 ай бұрын

If the proxy aka ear piece is broken that’s how u lose Face ID

Where did you get the screen boss ?

@worthitrepairsbymark

Жыл бұрын

www.mobilesentrix.com/oled-assembly-for-iphone-14-aftermarket-pro-xo7-soft

Screen encoding?

@worthitrepairsbymark

Жыл бұрын

They don't have that yet

Hello do we not have to disconnect the battery?

@worthitrepairsbymark

Жыл бұрын

I did not have to but I felt like I should need to still cause on other phones you do but I haven't work on that many yet to know if you have to for sure or not

Display price bro????

@Yourr-Anishh

5 ай бұрын

I want to sell my iphone 14 without motherboard.... Are you interested?

I replaced mine and it won’t stop restarting and I don’t know what to do

@worthitrepairsbymark

Жыл бұрын

Disconnect proximity sensor then try turning it on if it turns on it’s a broken proximity sensor

Does it says the message that the screen is not the original ?

@worthitrepairsbymark

Жыл бұрын

Yes

Does the new screen prevent True Tone display feature from working?

@worthitrepairsbymark

11 ай бұрын

For now until they make a screen programmer for it

How much u charge my daughter just ran hers over

@worthitrepairsbymark

9 ай бұрын

Ouch is it bent?

Mines won't turn on

@worthitrepairsbymark

Ай бұрын

Did you replace sceen?

@Yvesvalentino

Ай бұрын

@@worthitrepairsbymark yeah

@Yvesvalentino

Ай бұрын

@@worthitrepairsbymark like the phone makes noise when it gets unplugged but the screen isn't working

@worthitrepairsbymark

28 күн бұрын

@@Yvesvalentino sorry for late reply! Did you try a force restart quick tap volume up then down and then press and hold side button for 15 seconds?

@worthitrepairsbymark

28 күн бұрын

@@Yvesvalentino if that doesn’t fix it take off back and reseat the battery connection. Then if that isn’t working try old screen if it works it for sure is a defective screen but if it is beyond the chance of working I’d still wager in that your part might be defective.