Thanks for the Cable management ideas! Building this similar pink setup for my daughter! Cheers from 🇨🇦

I just got this! Super excited for when the parts actually arrive. I plan to make a video when I building my first computer!

@daddytech9195

3 жыл бұрын

Hi! Sorry for late reply, was so busy the past weeks. I visited your channel and watched your build video. Congrats! You did a great job!

This is super helpful! I'm rewarding myself by building my own pc after years of saving 😁 Ganda ng InWin A1 Plus na case. Portable and sleek!

@daddytech9195

3 жыл бұрын

Maraming Salamat po. Was planning to sell the build po pero ayaw ng anak at asawa ko dahil maganda nga po talaga. Hehe

Hope this channel grows

@daddytech9195

4 жыл бұрын

Maraming Salamat po. wow, We have same codename po. zaber din ang email ko. Haha, nakabilang na po kayo sa matatagang pa raflle natin sir!

Nice build sir. Meron palang pink na Inwin, angas!

@daddytech9195

3 жыл бұрын

Salamat po. Ganda nga po ng pink, walang araw na di ko tinititigan yung case. Haha

quick question do you think i would be able to spray paint it without messing up the wireless charger pad?

New to the channel po, I saw your build setup post on facebook. Nice cable management sir! :) Keep up the good work! Support! #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming salamat po. Abang abang pa po mga idol. Marami po tayong video. Nakadisassemble po kasi main rig ko kaya di pa ako makapag edit

Solidong mini-ITX

Well done

Good start, sir! :) Maganda din yung mga tips at cable management. For improvement na lang yung... 1. volume ng bgm ay wag kasing lakas ng boses nyo para mas clear at di distracting. 2. Remove the dead air. 3. Pwede nyo rin i-mute yung audio ng video doon sa part na kinakabit niyo na yung parts inside the case at yung bgm na lang sir ang ilagay mo :) 4. Para mas engaging yung part na yon pwede maglagay po kayo ng tips or anything in text form. Again, overall good po ang vid niyo. Just keep uploading 😁👍 #DaddyTechMatatag

Cute ng build

@daddytech9195

4 жыл бұрын

Maraming Salamat po!

yo i need help like a lot, i have had this case since February but i yet haven't understood how to connect the 2 fans with rgb and the rgb strip all together when i only have one fan connector and one addressable rgb and an rgb connector

@daddytech9195

3 жыл бұрын

Hi. Am really sorry for late reply. Fans included on this case comes with a socket to connect second fans. And if you need more fans, you can always buy a fan splitter, make sure to buy a PWM fan splitter or 4wires

@happytrix6167

3 жыл бұрын

@@daddytech9195 Thanks anyway but i have already gone too deep in the sff community with 4L case with a 1660ti and soon a 3060 ti in a 5L case lol

Saktong sakto eto rin yung build ko para sa girl friend ko. Salamat!

@daddytech9195

3 жыл бұрын

Welcome po. Salamat din po sir! Good luck po. Lalo ka mamahalin ng girl friend mo niyan :)

Watched the whole vid waiting for more uploads . I wish i could afford to have a youtube channel dedicated for building pc's. #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming maraming salamat po. More videos to come po. Soon po makakayanan niyo din at pag umabot na po duon sabihan niyo lang po ako.

where did u put ur SSD? and how do u change the RGB colour for the case?

@daddytech9195

3 жыл бұрын

Hi. Sorry for late reply, I am using m.2 NVMe for storage po. It is installed at the back of motherboard

Hey man! Does it fit If i want to add 2 more additionnal fans in the bottom regarding the included PSU ? Thanks à lot!

@daddytech9195

3 жыл бұрын

Sorry for late reply, if you're referring to the side fan below the psu, yes you can add 120mm fan, if you're referring the bottom of the gpu, there are 2 slots where you can install 2x120mm fans

@zizoug5894

3 жыл бұрын

@@daddytech9195no problem, thanks for your answer anyway. It fits easy ! Cable management in this case is horrible for à beginner like me xD

Do you need motherboard standoffs? None were included and I don’t see any being used here- what am I missing? Is there no concern of electrical shorts.

More uploads sir, God bless #DaddyTechMatatag

nice vid bud, keep it up! #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po. Nakabilang na po kayo sa matatagang pa raffle natin. Hehe

Question po...did you use fan splitter to connect all your case fans to the fan header since that mobo only has 1 or you directly connected the fans to the psu?

@daddytech9195

4 жыл бұрын

Yung fan po na kasama ng Inwin case ay meron built in na splitter, pero gumamit parin po ako ng isang splitter para sa dalawang fan sa ilalim ng case.

Nice cute build sir! #DaddyTechMatatag

awesome build, how did you plug all 4 fans for them to run, fan hub? and how do they all connect rgb? rgb splitter? I am having trouble with this issue, please let me know, thank you

@daddytech9195

3 жыл бұрын

Hi. Thank you so much! Happy New year! Sorry, was so busy this whole year end. For the RGB, Inwin fans comes with a built in splitter, just connect them daisy chained. If you're going to use other fans, you can try to use an rgb splitter or an rgb hub.

@jdi_6187

3 жыл бұрын

@@daddytech9195 no all good. Appreciate the reply, so they daisy chain together along with the led strip at the bottom of the case? That's where I'm confused about, do all 3 go together into the rgb controller? Please let me know

@daddytech9195

3 жыл бұрын

@@jdi_6187 yes. They were all daisy chained, right now, I'm using 5x Deepcool CF120, and I'm using rgb hub from deepcool. Plugged in to motherboard, this build has been upgraded now. Using B550i Gaming Edge Wifi, ryzen 3 3300x, gtx1660super

How did you wire all your fans with only one header on the motherboard? I have the same board but didn't see in the video how you did it.

@daddytech9195

3 жыл бұрын

The fans that came with the case has a built in fan splitter. It's connected like a daisy chain on the rgb

@chrisrogers7575

3 жыл бұрын

@@daddytech9195 I see. Have you experienced any problems so far with the motherboard since you are splitting the header? I have to same case and board but I'm using different fans that do not have a splitter built in so I'm trying to find options to make it all work without frying my board

@daddytech9195

3 жыл бұрын

@@chrisrogers7575 no problems at all. The single fan header is more than enough even for 3 fans.

@daddytech9195

3 жыл бұрын

@@chrisrogers7575 you can use the regular fan splitter or fan splitters with sata power and pwm pins so you can still control it via motherboard

@chrisrogers7575

3 жыл бұрын

@@daddytech9195 Yeah I was looking at possibly getting a fan hub that is sata powered to take the strain off the motherboard but if I can get 3 fans onto that single header without a problem then that saves me money. I am guessing then that the 3 fans will all run at the same speed do to being on a single header correct?

Support idol Galing #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming salamat po. Naibilang ko na po kayo sa matatagang pa raffle natin idol

Support!! #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po! Naibilang ko na po kayo sir

nice video

@daddytech9195

4 жыл бұрын

Done po. Salamat po, paedit din po comment niyo about sa pag subssss kasi baka ma mark as spam or ano po. hehe

@gglltech6675

4 жыл бұрын

@@daddytech9195 ok po. sorry

@gglltech6675

4 жыл бұрын

gawa ka pa maraming video idol. support kita

cable management is so satisfying #DaddyTechMatatag

@nathsvids5079

4 жыл бұрын

pa enter sa raffle boss idol

@daddytech9195

4 жыл бұрын

Maraming salamat po. Naibilang ko na po. Hehe

Kahit di nako manalo sa raffle basta makasupport lang sa mga pc enthusiast na kagaya mo💯 #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming salamat po. Lalo ako ginaganahan sa mga ganitong comments :) Wag po kayo mag alala, magiging fair naman po paraffle natin :)

Good video sana magkapc ako ng ganyan ❤️ #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po. Dadating din po ang para sainyo. Hehe. Naibilang ko na po kayo

Cute. Cable management is REAL haha. #daddytechmatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po. Hahaha, sanay po ako umubos ng oras sa cables, kahit maghapon pa basta malinis lang po. Hehe. Naibilang ko na po kayo sir!

@tmkpgameplay4525

4 жыл бұрын

Thank you Sir 😇😁

Boss San nyo nailagay ung harddisk?

Ganda ng mga na-iiscore mong items sir. Pwede malaman sir kung saan and magkano kuha mo sa mobo? More power to your channel! #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po. Almost Php 8k po bili ko, Toronto based po ako sir kaya sa Newegg.ca ko po pinurchase yung mobo

Does this case get hot for you when gaming?

@daddytech9195

4 жыл бұрын

stays cool all the time, currently using it with my 3300x and 2070 super. just flip the side panel fan to be intake and use the rear top fan as exhaust.

@bone987

4 жыл бұрын

Daddy Tech Also how do you feel about the stock psu? I have heard it is not good

@daddytech9195

4 жыл бұрын

@@bone987 believe me it is good enough, still quiet and i'm using 2070 super in it. The older version is the one which comes with a bad psu, this one is the newer version which comes with a 650w 80+ Gold

@bone987

4 жыл бұрын

@@daddytech9195 Ok thank you, that makes this a much more appealing case,and I think I will go with it for my build. I'll also give you a sub for being helpful

@daddytech9195

4 жыл бұрын

You're very welcome sir! Thanks a lot, turn on notifs also to be updated for my coming build videos and product unboxing

San po kaya makakakuha or makakabili ng inwin a1 plus white po sir? Hirap po makahanap ng stock sir eh

@daddytech9195

3 жыл бұрын

Try newegg po sir. Toronto based po kasi ako sir kaya medyo madali humanap ng parts

Hello sir! I messaged you on facebook sa Daddy Tech! I hope you could respond thank you :)

Sana mag ka pc din ako :( #DaddyTechMatatag

Kung merong lakad matatag. Meron tayong #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming Salamat po! Nakabilang na po kayo sa matatagang raffle natin. Hehe

GPU???

@daddytech9195

4 жыл бұрын

I'm using the built in vega 8 on the 3200g but I moved the motherboard to a new itx case, will be using this case for a 3300x and 2070 super build

@daddytech9195

3 жыл бұрын

@@sadboi8113 max graphics settings at 1440p hindi naman po. Kung 1080p competitive, medyo bawas ang fps compared sa 6core cpu, pero napakasulit parin po ng cpu na to

mahal yan bro ? patapik din bro sa chanel

@daddytech9195

4 жыл бұрын

Almost 8k php po yung motherboard palang. hehe. Maraming salamat po. Nadikit na rin po ako sainyo. Hehe

Love the video, but can't get over the fact that with a cheaper case you would've been able to get a better cooler with a decent looking case and still have something left, but oh well, for each their own, I like the case.

@daddytech9195

3 жыл бұрын

Thanks. But also take note, 650w 80+ gold psu is already included with the price, and there is also a wireless charger on top. And it is built with quality

Support idol sana mapili! #DaddyTechMatatag

@daddytech9195

4 жыл бұрын

Maraming salamat po sa suporta, naibilang ko na po kayo sa matatagang raffle natin idol. Hehe