This is one of the most concise and effective videos I've ever seen. Thank you so much!

I already did these tutorials but u can only learn so much from text and simulating. Hearing someone who knows what their doing is just really helpful so i appreciate this

This video is 3 years old and still amazing! Thank you

Thank you SO much. You just saved me work on a distance learning lesson. I appreciate you, sir.

@rbwauthy

3 жыл бұрын

Glad it helped! Please like and subscribe.

Well done! I am a teacher in Primary school and I didn't know much about making circuits in Tinkercad before. I am now ready to do some experiments during my lessons. Thank you very much! :)

@RemiWauthy

2 жыл бұрын

Thanks for the comment! I have a part two to this video as well. If there are other specific tutorials you would like to see, please do let me know.

Thanks, much obliged. I'm a professional software engineer who knows nothing about electronics sans what I was taught in high school a long time ago, and I never bothered to learn what a breadboard is and how it's used. Now I know this. Cheers.

@RemiWauthy

2 жыл бұрын

Glad the video was helpful!

Amazing video ! I just wanted to get into 3D modeling, but this feature intriguing me so much I just had to watch a tutorial on it. This video is explained incredibly well and even I could understand everything very easily even though I have a hard time with electronics/physics. I actually understood more things than in class last year, when I learned about all this, so thank you 🙏

@RemiWauthy

10 ай бұрын

Wow, thanks! Glad it was helpful! Let me know if there's another video you would like me to do.

Such a great tutorial! Very easy to understand.

Very well done. I actually get the feeling to start understanding electronics!

@RemiWauthy

2 жыл бұрын

Glad to hear this vid helped. Let me know if there are other videos you would like to see and please subscribe.

THANK YOU SO MUCH FOR THIS VIDEO! IT REALLY HELPED MY STUDENTS UNDERSTAND CIRCUITS AND HOW TO USE TINKERCAD!!

@RemiWauthy

3 жыл бұрын

Glad it helped! Please like & subscribe :-D

Holy cow! This is amazing! Thanks so heckin much!

this video really helped with my school work I liked the vid

Thank you very much for explaining it so good I now understand how it works

For anyone wondering it is called a breadboard because people used to use cutting boards with screws in it the make connections.

@RemiWauthy

3 жыл бұрын

Interesting, thanks for sharing!

Thanks, I didn't even know tinkercad had this. Thank you for sharing your knowledge.

Thank you for this excellent tutorial!

@RemiWauthy

2 жыл бұрын

Glad you enjoyed the video!

Finally understood it! Tysm!

Thanks this video helped me a lot

These videos are great should be more popular, you putting all the tags on?

Best Teacher. This better get me an A

Thank you Sir

Does anyone know if there is a DFPlayer in tinkercad? Alternatively, if its not available, is it possible to create our own custom components?

Thank you for the share/upload

@RemiWauthy

Жыл бұрын

Thanks for watching!

Wow amazing!!! Thanks so miuch!

@RemiWauthy

5 ай бұрын

Glad you like it!

Thank you

@RemiWauthy

Жыл бұрын

You're welcome!

In sophomore year learning about circuits using tinkercad, I already learned most of this in class, but it took like 4 class(every other day) and if I had watched this it would have only taken 15 minutes😂😅. Now I need to redo some things since i finally get it

@RemiWauthy

Жыл бұрын

Glad it helped!

you're the best

Is there a way to get a list of component connection made in tinkercad

Excellent video! Is there a way to mirror a component? I know you can rotate by pressing R in the Keyboard.

@RemiWauthy

3 жыл бұрын

Thank you, glad you enjoyed it! No, there is no way to mirror a component. I think this is because if you mirrored a component like an Arduino, the configuration would be incorrect.

@pacoryu

3 жыл бұрын

@@RemiWauthy got it. I wanted to mirror an LED. Anyway such a powerful tool.

ur best :)

Good One

THANK U HSHD U A LIFESAVER

@RemiWauthy

3 жыл бұрын

Glad I could help! Please like and subscribe for other great content 😀

I need help on a mechatronics class my son is sinking.

Remi, I have a question. At 13:03, why did you rotate your LED to have it vertical like that instead of just leave it the way it is?

@RemiWauthy

Жыл бұрын

Hi Tram, I rotated it so that the two leads of the LED would be plugged into different parts of the breadboard. Had I left it, it would be like connecting the two LED leads together and it would not light up. Best thing to do, is try it out.

Sir, liked your video can you please tell me how you made the resistor horizontal?

@RemiWauthy

2 жыл бұрын

Select the resistor then press the 'R' key. Hold on Shift and press 'R' to rotate it counter-clockwise.

@krishiv4295

2 жыл бұрын

@@RemiWauthy Ok sir, thank you!

(I don't have a computer or access to Tinkercad right now, so I can't test this for myself at the moment): - Do I need 2 resistors if I add a second LED to the circuit? If so, could I use a single resistor with a higher resistance, instead of using one for each LED? I have 10 physical pieces of 5mm(?) 940nm IR LED's (LIGHT *EMITTING* IR-DIODES, *NOT* -IR RECIEVERS- !) that I want to have turned on by using a single switch and a battery/-pack (it's going to be a stand-alone IR illuminator for a Raspberry Pi NOIR camera). Does that mean I have to add 10 resistors as well? And is a single 9V battery enough to power all 10 diodes? (Btw, I don't want to use an Arduino in the circuit. Just a battery, the LED's, some wires and a on/off-switch. If possible.)

❤️❤️❤️

good

Hey Remi, is that PDF file with the components and the symbols uploaded somewhere we could access it? It looks pretty useful!

@RemiWauthy

4 жыл бұрын

Hey Paul, here's a link to the PDF of the components: makerspace.isfeldschool.com/wp-content/uploads/2016/09/Electronic-Components-and-their-symbols.pdf Credit goes to Steve Claassen, a teacher in Courteney, BC, Canada. Check out his website and resources here: makerspace.isfeldschool.com/

@paulferrer2108

4 жыл бұрын

Remi Wauthy thank you Remi!

Hi , thank you for this very informative video, the link for the pdf isnt working for me ,if you can reply with a working link i'd be very thankful.

@RemiWauthy

Жыл бұрын

Glad you liked it. Try this link: bit.ly/electronicComponents

@AhmedHamdy-qx4om

Жыл бұрын

@@RemiWauthy thank you very much

India's most easy thing thank you

@RemiWauthy

3 жыл бұрын

You are most welcome

Thank you :]

Where did you "pull up" the electronic components chart from?

@RemiWauthy

4 жыл бұрын

I just put a link to it in the description or you can access it here: makerspace.isfeldschool.com/wp-content/uploads/2016/09/Electronic-Components-and-their-symbols.pdf Credit for the component chart goes to Steve Claassen, a teacher in Courteney, BC, Canada. Check out his website and resources here: makerspace.isfeldschool.com/

What kind of laptop you are using sir?

@RemiWauthy

2 жыл бұрын

Nothing too special. A Lenovo ThinkPad

what was the purpose of the other end of the breadboard, the wires. Do they serve a purpose in that circuit?

@RemiWauthy

3 жыл бұрын

No, they don't. It's a typical way to setup a breadboard as it provides power and ground to both sides of the board, rather than using long wires to reach one side. In this circuit it wasn't necessary.

@coolkid9770

3 жыл бұрын

@@RemiWauthy oh i see ty

Nice sir👍👍👌👌👌

@RemiWauthy

3 жыл бұрын

Glad you enjoyed it! Please consider subscribing to my channel.

I need to know if i can make sound detector for specific sound help meeeee😢

@RemiWauthy

Жыл бұрын

Hi, it is straight forward to make something that detects sound in general, but to make something that will detect a specific frequency is more complicated. Here's a tutorial to start with: www.instructables.com/Arduino-Frequency-Detection/

@norahalhajri6786

Жыл бұрын

@@RemiWauthy what type of input sensor should i use in the thinkcad because i can only use thinkcad

@RemiWauthy

Жыл бұрын

@@norahalhajri6786 Are you using an Arduino?

@norahalhajri6786

Жыл бұрын

@@RemiWauthy yes

@norahalhajri6786

Жыл бұрын

@@RemiWauthy yes

Noice vid. It helped me for my test

@RemiWauthy

3 жыл бұрын

Glad it helped!

Again another vid nothings the same very frustrating what version are you using ?

@RemiWauthy

4 ай бұрын

This video was made 4 years ago so some of the layout is different. Where are you getting stuck?

you da best

@RemiWauthy

3 жыл бұрын

Thanks! Please like and subscribe 🙂

Morevideos

legends are seeing on 14 February 2023

@zijin3200

4 ай бұрын

Exactly 1 year later

Good

@RemiWauthy

3 жыл бұрын

You're welcome. Please like & subscribe :-D

U didn't used sliding switch

yes tyy

I had to do it :/

Alles wat ik heb gedaan heeft niet gewerkt

Not many components. Something as common as a triac is not available.

@RemiWauthy

3 жыл бұрын

Yes, that is one of the downfalls of Tinkercad Circuits. I really wish there was a way to add custom components.

Others have a good comment but its not working the led is not light up. I follow the tutorial already but still not working.

fake issae

Boring but educational