Introducing the SDRplay RSPdxR2
The new RSPdx-R2 1kHz to 2GHz wideband SDR from SDRplay
The RSPdx-R2 is an enhanced version of the RSPdx with further design improvements for use at frequencies below 2MHz. Housed in a strong steel case, in addition to the functionality of the RSP1B, the RSPdx-R2 provides three software selectable antenna inputs and an external clock input. It offers excellent performance through HF and VHF frequencies all the way up to 2GHz. The RSPdx-R2 also supports an “HDR mode” optimised for the demanding radio reception conditions below 2MHz.
00:00 Introduction - the differences vs the RSPdx
00:24 The need to redesign to address component shortages
00:49 Key additional features compared to the lower cost RSP1B single antenna version
01:54 Demonstrating the RSPdx-R2 performance at 300MHz
04:00 Short demonstration of RSPdx-R2 at HF/VHF
05:08 Where to get the software
05:38 Where to purchase
This is one of many video guides from SDRplay - makers of the RSP family of SDR radios. See the full list of SDRplay videos and applications documents on: www.sdrplay.co...
The RSP family of SDRs from SDRplay cover 1kHz to 2 GHz with no gaps and give up to 10MHz spectrum visibility.
SDRplay is a UK company. The RSP SDR receivers are made in the UK and can be purchased for worldwide delivery directly from www.sdrplay.com/ (click on purchase and select your country to view shipping costs) or you can buy from any of our worldwide resellers listed here: www.sdrplay.com... Many of the resellers offer local free shipping and/or local language technical support.
The SDRplay KZread Channel is: / sdrplayrsp
Пікірлер: 51
Great to see that SDRPlay release another great product!
Why not show the PCB and the difference / quality in components and design? I would guess 90% of your viewing audience would immediately understand the difference -- the thought, care, and expense that went into the new offering. Just saying it's the new black box leaves me wanting.
Just bought a 1B and love it. It is a good improvement over the 1A and the price is right.
Oh yes. 10MHz bandwidth. Can't wait to get one !!!
@50719611974
3 ай бұрын
Me too 👍👍👍
@Coowallsky
3 ай бұрын
The old RSPdx had that.
Thank you! I have Three sdrs and use them on vacation up near Hayward Wisconsin.
Thanks for this new unit video…I plan to by one in a couple of months! 73! Have a great day!
much respect for your affords sir! wonderful work and some serious professionality and its much appreciated.
A profound difference on LW. I still enjoy pulling those NDBs out of the noise. 📻
Great illustration, Jon!
Congratulations, another great addition. Stay safe....J
I am having a hard time picking up anything in VHF/UHF. Not even FM Radio. Changed modes, narrow and wide. I have connected to HF and VHF/UHF antenna through duplexer. I have used with other radios and can confirm antenna works. I am running through panadaper on Icom 7300. Perhaps it can't pass any signals beyond the Icom 7300 range? It is working as separate HF receiver. So I am thinking I would need to use another duplexor and run VHF/UHF signals to separate antenna input? Will that offer enough protection from stray signals you think if I transmit on Icom 7300?
Amazing work! As a new MacBook owner I also enjoy the sdrconnect 🙂
Great news been waiting for this to happen, purchased a RSP1B a few weeks ago and now ordered one of these beauties, great timing, now just waiting for the next update to SDRConnect , any dates anyone?
@SDRplayRSP
3 ай бұрын
Today we did an update adding a Frequency module
I very nearly pulled the trigger on an RSPDX this week but I got distracted and didn't complete the purchase....glad I didn't now
I've had a RSPdx for a couple years, love it. Lately I've been thinking about getting a Duo as well, and running 2 RSP servers with the Connect software. Should I be waiting for a similar hardware update for the Duo? Also, just a future idea, a Morse decoder module for Connect would be a cool feature.
I'm presently using the RSP1a and now looking to either move to the RSP1b or to the RSPdxR2......question is there any receiver performance advantage on either of these ? Thank you
@SDRplayRSP
3 ай бұрын
kzread.info/dash/bejne/k4ijqblufrPOgLQ.htmlsi=Aq86PsBHRSY8Mzds
@tonytfuntek3262
3 ай бұрын
@@SDRplayRSP Thank you
Is this now a 16bit a/d converter or the same 14bit as the dx and 1A/B ?
Impressive, Jon.
waitin for quad tuner .....
@pcostadias
3 ай бұрын
Waiting for diversity control thru mouse wheel
@MIAMIC70
2 ай бұрын
Octo
I have an RSPdx and a Chinese 16-bit Dragonfly RX103. On shortwave, RSPdx is not worth half as much as Dragonfly. I use the RSPdx only in the VHF-UHf band. It's good there. Their software is overcomplicated and difficult to use. SDRConsole is better and much nicer. As they say: "Less is sometimes more!"
Have ordered it from HRO.
Would be nice if it had an ethernet interface also.
Just bought a RSPdx less than 2 weeks ago and did not open the box yet😡😡
@bern047
3 ай бұрын
30 days to return so send it back for a refund or exchange, easy peazy
@littlechestnutorchard
3 ай бұрын
@@bern047 unfortunately I am abroad at the moment and took it with me so not coming back to uk at least a couple of months.
@bern047
3 ай бұрын
@@littlechestnutorchard I see. the problem is you travelling abroad not the return/exchange issue
Is there any android support?
Can you recommend an EU distributor that have already taken the RSPdxR2 into stock?
@SDRplayRSP
3 ай бұрын
The stock will arrive with most of the EU resellers by Wednesday or Thursday next week. If there is a specific one, we can check on Monday to confirm.
Bought a dx just a few days ago. Shame.
@flexairz
2 ай бұрын
On you?
This sucks - Just got a dx
@dennis8019
3 ай бұрын
same here... pfffff
@bern047
3 ай бұрын
30 days to return send it back for a refund or exchange
@fotoralf
3 ай бұрын
Got mine a while ago. The difference with the 300 kHz beacon is striking. What's the opposite of 'made my day' in English...?
This work with macOS Sonoma?
@SDRplayRSP
3 ай бұрын
Yes
@MIAMIC70
3 ай бұрын
@@SDRplayRSP What if I have NO USB-A ports? Will this work with USB-C ports? My 2023 MacBook M3 Pro has only USB-C ports.
@SDRplayRSP
3 ай бұрын
@@MIAMIC70 I use an adapter on my MacBook.
Curious why in 2024 these still USB-B? USB-C is ubiquitous now, takes up less space on device, provides more power and is inherently shielded better than most USB-B cables.
@SDRplayRSP
2 ай бұрын
We don't need the extra voltage and the USB-B is mechanically very rugged.
@MIAMIC70
2 ай бұрын
@@SDRplayRSP You must not own a MacBook. I’ve never had a USB-C unplug accidentally and there is an audible and physical click when a USB-C is plugged in or unplugged.
@SDRplayRSP
2 ай бұрын
@@MIAMIC70 I have both a MacBook and an M1 Mac Mini. Constantly having to find adapters to use those USB-C ports. The USB type B on the RSP is the least of my concerns!
@MIAMIC70
2 ай бұрын
@@SDRplayRSP USB-B was released in 1996 I’m old enough to remember that as I was in the computer printer business 20+ years. Come on there’s ZERO reason for this legacy port. Hell many printers have moved on. It’s low data throughput, low power and hazardous ZERO reason to exist in a consumer device in 2024. That said I just ordered an RSPDX R2 but rather than resist and justify, listen to feedback. I know many people that will NOT buy a device that is not USB-C. I myself have over 90% of my devices on USB-C.