Order Here: reelrollers.com/product-category/reel-mowers/revolution-reel-mowers/

The finished product is even better. You guys really thought this out. Can’t wait till I can own one.

Ordered! Don’t tell the wife!!

@reelrollers

10 ай бұрын

Thank you. We'll be following up this week.

Well done Lee and Reel Rollers. An enthusiast's mower designed by enthusiasts. I'll be ordering.

@reelrollers

11 ай бұрын

We're excited about it. Appreciate your support!

Congrats on the new mower. I know it's been a ton of work to get this far.

@reelrollers

11 ай бұрын

Thank you!

@stanleyhenry3700

10 ай бұрын

Ron. Do you know of anyone who would need a 7-blade 25" GX 160 Mclane? I bought this in 2021 paid 2300 with bag catcher. Any reasonable offer is acceptable. Got to get this Revolution 26 before promotion is up. Thanks

Had the opportunity to see the Revolution26 today at ReelRollers. It’s an extremely impressive mower supported by great people! Ordered my as soon as i got back home. Thanks Lee and Isaac!!🍺

@reelrollers

10 ай бұрын

Thank you for visiting. It’s always fun to meet folks who share the same passion.

Ordered and looking forward to delivery in January!!! Currently own a Greensmaster 1000.

I own a Toro Greensmaster 1600 and I must say this is an impressive looking unit!

@reelrollers

11 ай бұрын

Thank you! We’re really excited and can’t wait to deliver them after all our testing

My order is in! Really looking forward to getting the Revolution into service. Best lawn in the neighborhood will be even better next year.

@reelrollers

10 ай бұрын

Thank you. I really believe we’ve set a new standard. As it grows so will our support!

Bye Bye Swardman. This is an awesome mower. A new standard in the lawn industry.

will be ordering soon-was just about to buy a trucut27.. Cant wait!

Truly looks amazing!!!’ Beauty and function!!! Who can ask for more!!! Well done

Gonna be heading to Atlanta tomorrow and plan on making a pit stop at Reel Rollers

Just placed my order, can't wait to try it out!

@reelrollers

10 ай бұрын

Thank you. We'll be following up this week.

Just ordered! Can't wait to use it next spring.

As an Allett user I would love to try one of these out! Excited about the potential here!

So glad that I held out for this. I can't wait to place my order!

@reelrollers

10 ай бұрын

Thank you. If you have any questions give us a call.

Awesome job to all you guys NICE work ✌🏾

Congrats and a great initiative. If I didn’t already own a Masport Olympic 500 I’d be very tempted.

OUTSTANDING!!!

Ordering mine now!

@reelrollers

10 ай бұрын

Thank you. We'll be following up this week.

I will definitely give this new mower a try in the future.

Just got my feet wet this season with reel mowing. Before making the investment, I purchased a manual reel mower to test the waters and see if reel mowing was something for me before purchasing a powered reel mower. Definitely liked the cut compared to a rotary, hence I was doing research on which powered reel mower to buy. This one checks all the boxes for my yard, hoc, back lapping, storage in my garage, easy hoc adjustment and the rear drum. Just placed my order a free hours ago and I can’t wait to use it next season!!!

@reelrollers

10 ай бұрын

That’s great. We’re here to help with the transition!

Beautiful machine! I'm just waiting for the call for me to take delivery of my R26.

This is awesome! Looking forward to this one!!!

@reelrollers

10 ай бұрын

Us too!

Nice looking unit. My wife gives me a Green light so I will order my son.

Just placed my order. Can’t wait to throw my current mower in the trash this winter and use a mower that addresses all of the faults I find in my current one.

17 lbs grooved roller! I cant wait lol

Looking forward to seeing more content

@reelrollers

11 ай бұрын

We’ll keep it coming! Promise.

You have my attention! Very cool!

YES! and you can get support and parts stateside! My next mower! Sorry Allett.

Very nice!!

Just ordered, says in stock. I'm guessing however will ship in January? Can't wait!

@reelrollers

10 ай бұрын

Yes sir, January is the delivery. Couldn’t program our site to say that at check out

Ordered!

@reelrollers

10 ай бұрын

Thank you. We'll be following up this week.

Looks like a beast!

Looks good!!!

Ordered mine Today!!!! Can't wait for it to be delivered... Let's go!!!! P.s if you could deliver before Jan. That would be great 😂

Awesome!!

I have a masport Olympic 500 and would say this mower is a 90% copy of the 660 but in cool guy black instead of the green. I do love that it’s a 26” mower and the roller on the masport is a joke. (Can you guys sell a 20” masport roller please 🙏). All that being said for any on the fence, I switched from a JD220 to the Masport and it’s so much more of a joy to mow with in a homeowner lawn.

You all need to demo up in Northwest Arkansas. Huge market potential…

@reelrollers

10 ай бұрын

I think this will be a busy 2024 and I wouldn't count anything out. We love a good road trip.

It must be a good mower they have an A-team van for promo😂😂😂

26 feels a little big for the residential market. I have several areas that would never fit into unfortunately. 20-21 seems to be the standard, but good luck.

Man i was really hoping this would go down to 0.125" for homeowner greens use so i could have one mower with quick height adjustments to go back and forth from yard to green super quick. I was so ready to order one. I love everything aboit this mower. Im gonna go cry a little now.

@reelrollers

10 ай бұрын

I’m sorry! We really tried to make it fit most folks needs but we are trying really hard to be transparent on where the mower will perform it’s best. It’s not a .125” cut type of design. Rather have you as a happy friend then an unhappy customer

@ryandaughrity9732

10 ай бұрын

@@reelrollers I respect yall for your honesty and it makes me want to purchase one even more. I have a lot of slope on my normal turf and was worried that a greens mower wouldn't handle it very well. Is there a mower you would recommend me look into. I know the rolux has the tracks on the drum and goes to 4mm, but not thrilled about some of the other components of the machine. I know greens use to be cut at 0.25" back in the day. How do you think the playability would be with the revolution at the 0.25". Thanks

@reelrollers

10 ай бұрын

A rubber tread is NOT good for golf green cutting heights, it will tear it up from what I’ve read. You want a steel drum at that low cutting height. So, greens mower is my suggestion

@brad9257

10 ай бұрын

@@ryandaughrity9732 check out Hudson Star mowers. They are manual and used on the pga tour for greens and collars. They cut as low as .09 inches

Id love to own one, time to save!!!!

@reelrollers

11 ай бұрын

It's worth saving for Tim!

@timborski1210

11 ай бұрын

@@reelrollers if I had the funds now I'd pull the trigger for sure. It looks like a good replacement for my 3 yr old Swardman I got from y'all.

Great looking mower! Would be great if you can make a video showing how to backlap it, so we can see how (hopefully) easy it is do compared to, say, a TruCut

@reelrollers

10 ай бұрын

for sure. all of this will be coming.

@ncsupilot353

10 ай бұрын

It looks like you just put a drill on the nut? Is it that simple?

Please bring out the electric cartridge version ASAP… I’ll be first in line!

@mivanows

10 ай бұрын

Protect the environment and do not buy lithium batteries. Use HONDA gas last 20 years. Batteries don’t last 1 1/2 years. Frustrating experience buying electric mowers and garden tools. 4 out 6 are in the trash - is not worth to buy batteries but get a new one.

I thought it looked alot like a masport lol, they are a decent machine. Good for a residential use.

Wow great price for what you get. If you make electric I’m in!

Really interested in this mower and can’t wait for the videos of it being used 👍🏻

@reelrollers

10 ай бұрын

Now that we've launched, we are opening up demos and will begin getting more photos and videos of the mower in use out to the public.

Please tell me a smaller unit is coming?!

What about reel sharpening, will you offer mail in sharpening services. Love the mower!

Are there plans for accessories (or are there some already?) for dethatching and/or scarifying like the Swardman attachments?

The A team van is legit

Can you comment on how it performs on a slope? Would love to purchase one during the pre-sale, but without seeing it perform on a steep gradient, I'm a bit reluctant. Are there any plans to have any of the "testers" review it before the pre-sale ends? Thanks!

Hey, when are you going to release video of this thing in action. Is this like that Tucker movie, where the car doesn't drive yet?

@reelrollers

10 ай бұрын

videos, reviews, comments, photos. everything will be coming quickly because we now can actually share the product with customers who visit our shop

What's the weight and were the clutch issues addressed with this redesign?

Great step towards competitors but I think there’s a lot of design work to make it simple. They work pretty well in a flat surface but no homeowners do not level properly their lawn. Another point is how easy is to turn around obstacles.

Niiiiiiiiice!!!!🤩🤩🤩🤩🤩🤩🤩🥰😍💥💥💥👍👍👍

With the handle is folded down what is the height of the highest point . My truck has a bed cover and I close it with my mower in it for security

I like it, but come up with a heavy duty residential ride on reel mower and you'll change the game. Most commercial ride ones are either beat up with a million hours or too expensive for low hour units. There's no happy medium. Also, I'm a commercial provider and have a masport rotary and can attest to their build quality.

QR codes... anybody out there learn that in school, or did they teach english? Yes, I know this is a convenience for many, but I learned english. so electronic cuneiform is not my thing. But I digress. Beautiful machine with all the right features - if I wasn't broke, 'sold' would be the word.

Does it come with interchangeable cartridges?

Can you use different cartages like aerator, verticutter, etc.?

@reelrollers

10 ай бұрын

No sir, this is a reel mower only. Not a cartridge system mower.

@ShadyAcreLawnCare

10 ай бұрын

Thank you for answering! Nice looking mower. I do plan to get a Reel Mower for next year. Do you guys ship to Canada?@@reelrollers

Are there grease fittings for the front roller? Any plans for a sulky?

@reelrollers

10 ай бұрын

There are no grease fittings for the roller. Sealed bearings which can be replaced. Sulky is a good idea. Future plans on product development or launches are an internal discussion we prefer to not comment on in public.

Congratulations! Are there plans for an electric unit?

@alancolemanjr.794

10 ай бұрын

I believe on the Ron Henry stream Lee said 2025? But don't quote me

@reelrollers

10 ай бұрын

This is something we are pursuing for the future.

Get some beta tester testimonials and get them on YT!

@reelrollers

10 ай бұрын

Yes sir. This is our strength, we just need a little time for them to get posted

When turing mower on grass , Does 2 rear roller Turn same direction or opposite direction when turning

@reelrollers

10 ай бұрын

Opposite directions so the turf doesn’t get damaged.

I would love one but just curious how the clutch will perform. I had a masport 500 that the clutch blew 3 seasons in a row.

@reelrollers

10 ай бұрын

I'm sorry to hear about that, but this was something which was changed I would say 5-10 years ago. It is a different clutch and material which has been very strong.

@brad9257

10 ай бұрын

@@reelrollers great to hear. I’m strongly considering your new reel mower!

I currently have a McLane 25" Honda 10 blade, and have been using McLane for 40 years.. I cut my lawn 1/4 to 3/8 in height. I'm currently looking at a used Greenskeeper 6 months old I am interested in your mower but I don't know that much about your product.. I live in Huntington Beach, Ca. What can you recommend..?

@reelrollers

10 ай бұрын

I would go with a used greenskeeper if your at those heights for 2 reasons. First, you want a steel rear drum if cutting that low. Second, maintaining a lawn at 1/4" - 3/8" means you need to have the abilty to cut it down to 1/8" and our mower doesn't cut 1/8"

I assume this is for someone performing their own maintenance?

Wondering can it ACTUALLY cut effectively at 1/4”? TruCuts are supposed to be able to cut around 1/4” but a lot of folks (including myself) can’t because the frame sides drag the ground too much when down that low.. even on flat concrete it drags.

@reelrollers

10 ай бұрын

It can cut 1/4” on concrete, but I wouldn’t recommend it on turf because it’s not perfectly level. I feel good about 3/8 because we did scalp to that height at turf park last week and are now maintaining it at 1/2” easily. For 1/4 cut, the mower needs to be able to cut to 1/8” and I just can’t recommend it unfortunately

@RussC123

10 ай бұрын

@@reelrollers Got it, thank you! Looks like a really nice mower. The easy HOC adjustment and rear drum are huge selling points. If adjusting reel to bedknife contact is simple but highly precise/accurate this is a game changer mower for the typical homeowner.

@cbak87

10 ай бұрын

Loving the sound of this mower so far… but push me over the edge on why I should buy this one and ditch my good ol’ Mclane😂.

I bought a 25" 7 blade GX 160 in 2021. My only problem with it is answered with this new design. I am now stuck with it, don't know what to do with it. I love Reel mowing. Which someone could make me an offer. I certainly would get this new design.

Curious what were the determining factors in going with a 6 blade instead of a slightly higher blade count?

@reelrollers

11 ай бұрын

Not many folks realize, but it’s not blade count but clip rate that matters. For example, all the greens mowers use a 5” diameter reel - same as our Revolution. A 6 blade 5” reel clip rate is more like a 8 blade reel everyone is used to from tru cut, trimmer, and McLane because they use a 6” diameter reel. Plus, our rpm of the reel is higher than the traditional homeowner reel. We’re confident and tested our 6 blade reel to be an optimal blade count for a 5/8 cut. Meaning, it’s sweet spot is 3/8” - 1” cut. Ideal for non golf course use. So many factors people don’t consider, but we did with our engineers to make sure we deliver the best option based on clip rate (frequency of cut) for the USA residential needs. Great question. Good example, a swardman 10 blade reel due to RPM and their 6” reel is the same (close) to the same FOC as our 6 blade. We did lots of math 😉

@RioTheHitman

10 ай бұрын

@reelrollers Thanks great info

@jamesporter.

10 ай бұрын

@@reelrollers this was my first question and I’m happy you answered it so detailed.

@alancolemanjr.794

10 ай бұрын

Great info to know. I have a 6 blade swardman and get that cordaroy ripple effect when cutting sub .75". So many reasons I will be pre-ordering this mower and reserving the swardman to cartridge duty only.

@GTNTHR

10 ай бұрын

@@reelrollersExactly the question I had and the detailed answer I was hoping to hear. Very well done! Looking forward to seeing this thing in action! Love my 25”McLane 10-blade but, time to upgrade!

I need a 10 blade reel. Will you offer a discount when the 10 blade mower is released?

@reelrollers

11 ай бұрын

We do not feel you need a 10 blade. We've done the math. The Revolution uses a 5" diameter reel with a higher RPM which has a clip rate equal to that of an 8 blade/ 9 blade reel. Tru Cut, Trimmer, McLane, Swardman all use a 6" reel. Our clip rate equals that of a Swardman 10 blade (they are the only ones posting their clip rate). We knew we had a GREAT cut, but until we spoke with the engineers at Masport, we didn't realize why our 1/2" cuts were so nice. Our 5" diameter reel is the same diameter as all of the greens mowers. Something we learned 2 weeks ago. Actually, a great surprise for us. Optimal HOC is 5/8" meaning the range for great cuts is 1" - 3/8".

@Blubaugh5

11 ай бұрын

@@reelrollers Thanks for the reply, I mow at a 1/4 to 1/2" I thought you guys said you were releasing a 10 blade in the spring.

@reelrollers

10 ай бұрын

We were going to and still can, but when we started to do clip rate math, it honestly opened my eyes to understanding the blade count is just 1 of 4 factors to optimal cutting height. I thought like most, 6 blade reels must mean a cutting height of 1”-2”, but when Masport engineers explained their rpm, ground speed, reel diameter, and 6 blade count I quickly realized our mower is already designed to cut low. Not golf green low, but very close. In fact, our 6 blade clip rate is slightly higher than a swardman 10 blade and very close to a trimmer 10 blade (more like a 9 blade). Putting a 10 blade (again, which they make), makes it a greens mower which is not our target market. Cutting greens height would be best with a non rubber rear drum, a different angled bedknife, etc.

Do the pre-orders come with a fancy plaque on the mower, or something signifying it's early adopted? 😂

@reelrollers

10 ай бұрын

We’re all about the experience and customer service…. For those that preorder, there are several surprises we have planned and a few features we didn’t talk about which will be on the mower as a surprise. Let’s just say upgrades you will appreciate.

@steffen707-

10 ай бұрын

@@reelrollers that may have been the push I needed to pre-order. Thanks!

@reelrollers

10 ай бұрын

I like surprising people and over delivering. You won’t have the mower for Christmas, but you will have something under the tree

Wish the cutting height would go to 3".

Can we preorder, but take delivery around late February or early March?

@reelrollers

10 ай бұрын

Yes, certainly. Just tell us when you want the mower shipped from our shop and we’ll have it to you anytime in 2024

Unfortunately I have gone as "electric" as I possibly can due to my wife's sensitivity to anything petroleum. This is an awesome product! Maybe you would consider an electric version of this. I realize there may a power issue with not having enough using LiFePO4

@realJohnWare

10 ай бұрын

I bet she’s not sensitive to the petroleum used in the production of her Stanley cup and Lulu bag. 😂

@larrycox6614

10 ай бұрын

@@realJohnWare good point.... but she has neither.

@reelrollers

10 ай бұрын

Something we will look into for the future.

Future plans on a smaller battery powered model?

Where can I buy one in Hawaii

Are you guys hopefully coming out with a 20 inch revolution 26” is kind of big for the average home in my area

Are there transport wheels for this mower?

@reelrollers

10 ай бұрын

No, but i'm unsure why you would need them? Or, if you do need a traditional transport wheel set up reel mower a greens mower may be best suited.

So, available in January?

@reelrollers

11 ай бұрын

Pre orders over next 30 days will ship January!

cartridge style exchange on the unit?

@reelrollers

10 ай бұрын

Thank you for the question. This model will not have a removable cartridge. We do plan for this in the future.

Planning a 20” in the future?

@reelrollers

10 ай бұрын

I don't think anything is off the table. Our primary focus for the next 6 months is ensuring the Rev26. It's also tough to put out internal plans on public platforms. I'm sorry.

@Alejandro_C62

10 ай бұрын

@@reelrollers understood. Will definitely be following. The rubberized rear roller is a huge draw.

Can you please help me understand the following: I have ordered the Rolux but thinking about the Revolution. 1. What parts are plastic versus steel? Rolux is virtually all steel (outside of the grass catcher which I prefer plastic). I think it makes the Rolux more durable. 2. How thick in millimeters or inches is the reel and bed knife? Roluxs are very thick so I am trying to determine difference between the 2. 3. The CEO mentioned guaranteed delivery date for January. Is that for all presale orders? 4. Why is there not a 10 blade option and how much will it cost upgrade for folks who preordered? This is a key differentiator me. Can you please help me understand if I will have a difference in cut quality compared to the Rolux 9 blade if I still with 6 blade? 5. Rolux has great customer support, is the expectation that the service (given this is a new line of business) will be similar or better?

@rizocars6115

11 ай бұрын

Honestly o prefer the Rolux, I would keep that order if I was you

@reelrollers

10 ай бұрын

Thank you for your questions. Let me try my best to help. 1. I only know of a plastic catcher and rpm lever on the revolution. Also I think the height of cut knob is a type of plastic. 2. I don’t have the mm of the reel and bedknife of the Rolux, do you know? 3. We will be delivering all preorders in January. Masport can make us over 500 of our mowers per month, so once the preorder is over we’ll confirm how many we need plus order s couple hundred more to have in stock. 4. Cut quality is not based on the number of blades, that’s false for 2 reasons. First, it depends on what height you are trying to achieve consistently. The best cut on a reel mower is when the frequency of cut = the cutting height. Another words, if you want to cut 1/2”, each blade should come around when the mower travels 1/2” forward. The Revolution is designed to have a perfect cut at 5/8” with the 6 blade reel because it is a 5” diameter reel just like s greens mower. We also have a higher reel RPM compared to most. I can’t speak for Rolux, but trimmer, tru cut, McLane, and swardman all use a 6” diameter reel which means our clip rate on the 6 blade equals that of a 8 or 9 blade tru cut reel. Because optimal cut for us is 5/8”, our mower is ideal for 3/8” -1.0” cutting height. A 10 blade is too much of a clip rate on the revolution unless you are cutting a putting green. If you are are keeping a putting green I would suggest a greens mower. 5. We’ve been the leader in residential reel mowing for over 10 years in the USA. I believe our track record is proven and speaks for our ability to provide amazing customer service. We are also based here in the USA. Appreciate the questions and I hope this helps

@abhakta002

10 ай бұрын

​​​​​​@@reelrollersthanks for the reply! I appreciate the time you have taken to answer my questions. Here are the thickness of the Rolux 9 blade - is .167in with a 5in diameter. Is your 5in diameter outside of the blade to the outside of the other blade or inside?

@ohyeahhh3221

10 ай бұрын

@@reelrollersI too am curious about the thickness of the blades.

@abhakta002

10 ай бұрын

@@reelrollers Any update on the below as well as videos of the mower being used?

When is in the pipeline to make an electric version of it.

@reelrollers

10 ай бұрын

This is something we plan to do in the future, but we need to pull back on commenting publically on our business plans.

Why not offer an electric version?

@reelrollers

10 ай бұрын

Everything takes time. We have plans to in the future

Can you put an 11 blade reel on it as an option?

@Danny-ti7yy

4 ай бұрын

Would be a mistake to put a 11 blade reel on this machine. Mowing at .25-1.25” this has the best blade for that.

@coachliu32

4 ай бұрын

@@Danny-ti7yy really at .25??

@Danny-ti7yy

4 ай бұрын

Yeah... I scalped mine to .125 very nicely with 7 blade. 6 blade at .25 would still be good. no way you're cutting worth a darn with a 11 blade at 1.25" though. @@coachliu32

How much 👀

Lee will California people be able to buy one down the road? The new law goes into affect the 1st of January 2024 on gas powered equipment

@reelrollers

10 ай бұрын

Amazing question that we are trying to figure out. We have a call into 2 of the dealers we work with in Cali. Our question is, if a CA customer buys a Revolution today, but we don’t deliver until January…. Are we breaking this new law? Or is it just “sales” after Jan 1?

@jamesporter.

10 ай бұрын

@@reelrollers with that same question us idiots living in California if we do purchase one now and let’s say that stupid California law says you can’t ship it to us, can we make a road trip and come pick it up?

@reelrollers

10 ай бұрын

Sounds like a good business plan. Put a warehouse at the border of CA to sell gas powered mahines

@joelhernandez4546

10 ай бұрын

@@reelrollers 10-4 thanks Lee

@cbak87

8 ай бұрын

Would absolutely die to have a Black Friday deal with a little knocked off the top for a pre-order!!🤣🤷🏽‍♂️😉

Do you take trade ins??? 😂

@reelrollers

10 ай бұрын

No sir, we do not take trade ins.

If it does not have other cartridges, myself and I'm sure others will not be interested.

@reelrollers

10 ай бұрын

Thank you for the feedback.

@darenbussian6024

10 ай бұрын

Trust me when I say I'm not knocking it. It looks great and I'm sure performs even better.

To answer your question. Somebody already has made a mower just like this. Allett. Just saying. But I am interested🤔

Way too expensive

This felt like a sales pitch for the guy's opinion of the mower, instead of a sales pitch for the mower itself. I didn't see a whole lot of what the mower can do. Also the truck in the background is a try-hard move - like it's trying to show that the mower must be pretty good if the logo is applied to the side of the truck. I'd rather see the mower doing some mowing. I'm still going to upvote the video because this looks like a small business just getting started and I root for people that follow their dreams.

@realJohnWare

10 ай бұрын

This comment is ridiculous. It does nothing but prove you don’t know anything reel mowers, Lee, or the company he has built.

@reelrollers

10 ай бұрын

So you're saying I won't cut it on Shark Tank? All seriousness, thanks for the feedback. We'll continue to improve.

Ordered!

@reelrollers

10 ай бұрын

Thank you. We'll be following up this week.

Ordered!

@reelrollers

10 ай бұрын

Thank you! We will be in contact with you this week