Introducing The Audio Dynamics 2200 Series
Ғылым және технология
A brief introduction to the brand new 2200 series subwoofers from Audio Dynamics.
Product links:
2200 Series 8" D2:
adcaraudio.com/store/product/...
2200 Series 8" D4:
adcaraudio.com/store/product/...
2200 Series 10" D2:
adcaraudio.com/store/product/...
2200 Series 10" D4:
adcaraudio.com/store/product/...
2200 Series 12" D2:
adcaraudio.com/store/product/...
2200 Series 12" D4:
adcaraudio.com/store/product/...
Use the promo code "HEXIBASE" at checkout for 20% off the web store price.
Homepage: hexibase.com/
Facebook: / hexibase
Instagram: / hexibase
Printables: www.printables.com/social/264...
Thingiverse: thingiverse.com/hexibase
SoundCloud: / hexibase
Patreon: / hexibase
Amazon Storefront: www.amazon.com/shop/hexibase
Products featured throughout my videos can also be found in my Amazon Storefront: www.amazon.com/shop/hexibase
If you'd like to support this channel directly:
www.paypal.me/hexibase
/ hexibase
Soundtrack Credits:
Endless by Psykick (c) copyright 2015 Licensed under a Creative Commons Attribution Noncommercial (3.0) license. dig.ccmixter.org/files/Psykick...
shadows by cyba (c) copyright 2019 Licensed under a Creative Commons Attribution Noncommercial (3.0) license. dig.ccmixter.org/files/cyba/60095
Пікірлер: 139
Every product advertisment should be like this. Informative, honest, and non aggressive. Makes me want to buy one! 😂
@weareallbeingwatched4602
4 жыл бұрын
Generally speaking an engineering-driven sales process will be more honest and scientific in nature. The difference in style between buying aerospace components and disposable razors is remarkable.
Exited about v2 on the 3dprinted sub!
@ohyou_6599
5 жыл бұрын
@@HexiBase Good, good. I have one of those subs sitting on my desk just waiting. It should be a perfect match for my tiny car. Thanks!
@opk157
4 жыл бұрын
Cant wait to get going with the 3d printed sub... Any day now? And please share your design 👍
@erikmuller8512
4 жыл бұрын
@@opk157 look up his Facebook and you can se a post about the sub!
Just as a heads-up and something to potentially look into. Upon a quick inspection of the D2 version of the AD2212 it appears that the moving mass parameter is incorrect. What would be mathematically correct with all other related parameters accounted for would be 346.8g apposed to 307g. Though I do believe this would also be incorrect when compared to the D4 variant that has a mathematically infallible 234g Mms figure. The deviation could likely be caused by one of three possibilities. Within the Vas calculation method chosen, the added mass used wasn't ideal to achieve realistic results, or the test box volume wasn't correct; assuming either method was used. Lastly, there may have not been a sufficient break-in period for the D2 driver when using the same added mass or net volume for the test box methods between the D4 and D2 variants. There may have been other factors, but these are the ones that come to mind first. Though I do have a question, are the inductance parameters listed indicating a 1khz Le, or 10khz Le?
Salesman of the year. Just might try some out. Keep up the great work with the tutorials, product introductions, and all around taking the edge off of a hard day at work.
@vernonjackson1792
Жыл бұрын
@@HexiBasequestion, I’m trying to decide between the 2000 series and the stereo integrity SQL subs……definitely looking for SQ
It would be nice for AD to come out with a pure sound quality sub spec'd for a sealed enclosure. All that knowledge Pete has should go into something that can compete with the high end sql subwoofer market. That would be a quick buy for me. Food for thought.
@lakorai2
4 жыл бұрын
How would the 1200 series compare to the IDMAX?
@kdeaze05
4 жыл бұрын
@@HexiBase Will do, thanks Pete!
@kdeaze05
4 жыл бұрын
@@lakorai2 great question? We may have to do a head to head sound off! 😁
@noncog1
4 жыл бұрын
The fi neo q series needs way more competition, I dont know of many other sq subs that can take the power they can
Ordered a set of 12s just to support your product. I am gonna run some DC audio but picked up a set just because you are super helpful with you informative videos. Probably put them in the wife's car. Thanks again for all of your informative videos.
@Si_Luis904
4 жыл бұрын
How do these sound? Debating between this and sundown e series.
those look tough for sure! great video as always!
Such a nice lineup
I fell what you have made is the in my view the perfect sub. Affordable, reliable and durable. Dare I say its reminiscent of the fusion powerplant subs from 10-12 years ago which I still use today in my car and they have been run on a 1000w mono block for nearly 12 years straight. You have kindly made there replacement.
Very nice subwoofers. Would love a pair . But it's not in my budget this year. Great video and patiently waiting for another.
Best ad I have ever seen! 👍
How does this compare to JL audio subs?
Thanks for the news of what look to be a bad ass subwoofer....
love it!
another one excited for the 3d printed enclosure v2 here
@modelerrrrr
5 жыл бұрын
@@HexiBase awesome bro!
Thats a great sub!
What's the XMAX? Can you work with them on a sub for a small sealed enclosure? Thanks for the vids!
@hexibase would one be better running 4 of these in the dual 2 ohm version at 1ohm final load on 3000watts or 4 of the dual 4ohm versions on 2000 watts? Will end up in vented enclosure or perhaps a 6th order blow through.
Can you do a video explaining aperiodic (AP Mat) enclosures?
Very interesting. Pete, why the choice of foam over butyl rubber in the surrounds? And, any plans for a 15" version or would the enclosure requirements eat up too much space? As always thanks!
@charliefrancis6438
5 жыл бұрын
I have some 20 year old subs with butyl surrounds and some ten year old foam surrounded subs and the foam ones have been hastily repaired with black silicone, while the much older butyl ones are still kicking and looking good
Sorry for the stupid question.. Can you recommend a good free air woofer 8' or 10' inch.
Hexibase does AD make a sealed enclosure subwoofer?
Pete! How big and powerful of a woofer can be built for sealed applications before it's no longer viable for said application?
Is AD Designs planning to revise the 3000 series? Just seem like your slowly updating the entire range!
@juststuff5216
5 жыл бұрын
@@HexiBase Keep em coming, and I wish AD Designs all the best!
Will 1500 watt kicker zx be too much power for the 2200 12s I'm only looking to run 2
Did you make a box for these?
Nice video my friend
How would these do in a transmission line box?
@juststuff5216
5 жыл бұрын
@@HexiBase Yay 😎
Please make a detailed video on a sealed enclosure with a proper matching sub that's available on website .
Could you use a sub speaker in a bass guitar cab?
I'm interested in getting 4 2208 D2 subs. What's the xmax on that sub? Also will a 2.7 cubes ported box be ok for the 4 subs tuned to 32hz
My sub just started smelling like crap today so as soon as I'm sure it wasn't my amp that caused it, this could be my next speaker!
That's some really great looking subs for a fantastic price. I'm drawing up some enclosure designs right now, so I'll have to give these a shot.
Hey buddy i finally got a somewhat new to me a 2018 ford ecosport witch if you know its small with a small trunk .i will like to keep the sapace for a walker and a at least a travel bag . I will need a custom sub box with either a single 10 inch or a dual 8 in sub box. Let me know your input and if its possible. Plus price .Thank you.
Look like decent subs for sure. I am going to make some towers for my new house and these might find there way into them.Never know.
@FSXgta
5 жыл бұрын
You probably need a very low crossover, unless these have usable response over 100hz. If you use 3 way that is
@jondoe6618
5 жыл бұрын
FSXgta woofers will be powered and crossed over separate using a crown amp.
How do they perform beyond rated power?
I'm about to order one of these. Idk yet though. I need more bass with less space and I'll pay to play now. My audiopipe TXX-BDC2-12D4 just isn't working, both in terms of space it takes up in it's 3cf box and sound.
How are these in a transmission box?
They look really beefy and powerful. I like the pole venting ,the massive surround of the cone and the dual stacked motor. But when should i use the 3000 series subs? Simply if i need more SPL? Do you ship to germany?
@TeamMSound
5 жыл бұрын
At Kove Audio (Germany) there are the same woofer Kove KLD Greetings from germany
@airwolf1337
5 жыл бұрын
@@TeamMSound Danke! Sehen echt genau so aus. Bin gespannt, ob die TSP auch gleich sind. Ist also OEM Ware, die gebrandet ist, vermute ich. Schade, das Video von Hexibase hat ein Eindruck gemacht, es seien selbst designte Chassis.
@TeamMSound
5 жыл бұрын
@@airwolf1337 Sogar DD verwendet die gleichen teile. Es gibt halt nicht so viele Firmen die Woffer bauen in China ;-) Kommen fast alle aus dem gleichen werk
@TeamMSound
5 жыл бұрын
@@airwolf1337 man kann schon z.B mehr oder weniger Zentrierungen oder andere spulen verbauen lassen.
I like the videos "to the point"
These sure are pretty. How soon can we expect to see you experimenting with them?
@OlafurArons
5 жыл бұрын
@@HexiBase Dope.
@CORZER0
4 жыл бұрын
@@HexiBase 6th order, rear-loaded, folded horn for a 15"!
What would you say this sub compares to?
Hi Hexibase, Did you perhaps explain more in deepth the Fs parameter in another video? I mean I've seen the video with a quick explanation of all TS params, but I was thinking more about Fs specifically. You say that it doesn't say how low a sub will go, but doesn't it say something useful? If it's the resonating frequency than one might assume that at that frequency a speaker built with such driver would have very good efficiency at that frequency is that correct? And then is it completely pointless to look at Fs or is there some rule of thumb that like going -10Hz from Fs is ok, but lower than that would be impractical or something like that?
@AWThethrower
4 жыл бұрын
AgneDei this sounds like a great idea. Explain the fs in detail and how it relates to ported and sealed enclosures and their output
Dope
estos subwoofers me recuerdan mucho a los subwoofers rock series, audiolabs y magnum que se venden en latinoamerica
Interested in a single 12”. 2010 Honda Civic sedan for the wife. The back seat folds down in one single piece, it’s not divided like some others. Would you design an enclosure that fires back or toward the cabin?(trunk lid is heavily deadened) Would really love a 6th order design from about ~30hz up to whatever is possible to get the best of both worlds.
@dvcsub
5 жыл бұрын
HexiBase isn’t the design service included with the purchase of AD designs subs?
I wish I could finish my sound system with these 😭
I need 4 of these in my burban
Can we get an updated coupon code.?
So excuse my ignorance here... What is the difference between car subs and recording studio subs? Is there a difference at all? Maybe you have a video already clarifying this that I could check out? I make music and Neumann kh 805 is a sub that goes all the way down to 18hz but it costs $2000 canadian... Kinda pricey. Is it the enclosure that allows for such low end? Amplifier+Woofer itself? All three? How would I be able to possibly recreate a sub or two for my studio that goes down well below 30hz? Thanks for any help :D
@freedomtvofficial7205
4 жыл бұрын
@@HexiBase Thanks for the reply! Maybe you could eventually do a video on the subject? Would be a fun to watch and learn about these things! :-)
2108 vs 2208 who wins and under what circumstances do they win?
Btw, from personal experience these subs sound really good at their price point. You can beat them with "internet" brands, but as far as "premium" dealer network brands these are very hard to beat at the price point.
@btkramer
2 жыл бұрын
What internet brands?
@noncog1
2 жыл бұрын
@@btkramer quite a few, dayton is always a good starting point
Nice speakers now make a 3"er for the little home made sub of yours :)
Kove Audio (Germany) NEW KLD Woffers Looks exactly the same. It is probably from the same manufacturer ;-)
@u9Nails
4 жыл бұрын
Looks can be deceiving.
Watch out if you want to hear 30hz or below. That graph at 2:23 looks pretty accurate. Real life might be a couple hz higher and you'll be looking for better sub..... like me.
Descent budget sub, the market is flooded with these subs rn tho they have a lot of competition
wait, what exactly is your relationship with AD?
@ulamss5
4 жыл бұрын
@@HexiBase ah cool. That statement is better advertisement than money can buy!
Foam surround.... Really? Seems like this was chosen to lower manufacturimg cost and increase margine
@kenhaze5230
4 жыл бұрын
Why would they choose the superior option to lower manufacturing costs?
@justkiddin1980
4 жыл бұрын
How about compliance? did it specify what type of foam? why would a foam surround be only bad in your expert opinion?
@lakorai2
4 жыл бұрын
I would gladly pay $5 more for santoprene or butyl rubber surround
@justkiddin1980
4 жыл бұрын
@@lakorai2 i know they degrade over time...at least the old compounds..but i think pete put a lot of thought in those chassis and the surround is made that way for a reason..
@lakorai2
4 жыл бұрын
@@justkiddin1980 the reason is profit margin. I get it. $0.50 or $1.00 per subwoofer times a few thousand units is potential for plenty of lost profit. However at this price point and quality point most audiophiles and car audio nuts dont vare about paying another $5 to get something to last longer.
A driver specifically optimised for sealed use would be very welcome, actually.
Am I wrong....a smaller enclosure, less acoustic volume, gets you more under-damping.....and a larger volume will get you more LF extension at the expense of SPL?
@AWThethrower
4 жыл бұрын
ZYZZXX no other way around a smaller enclosure is over dampened, producing better transients but is horribly inefficient (less spl) while a larger enclosure will provide more spl but push it too far and you will loose all sense of sq and transients and end with muddy boomy sound that’s load but there’s no point cause it will sound like crap.
A driver specifically optimised for sealed use would be welcome.
no 15"?
No cast basket? No go!
@kawmic7
4 жыл бұрын
@@HexiBase ok. Thnx😎😎.
That 8 inch would be bad ass with an 8th order 😈
Dexters Laboratory... for BASS in da car.. :) thx buddy
I prefer pro woofers with 4" voice coil, even with low power its fills the room down to 40 hz
Foam surrounds make me feel a bit sad. They are generally not a long term investment.
Llego El lechero
Ok but can we talk about the 3000 watt sixteen 8" package AD sells, because it moves about as much air and takes about as much power as a DD 9921. Like, who's idea was that?
Sir,can you spend some of your time to teach people to build subwoofers and other speakers?
Pretty much just n average sub. I wonder if is plexi glass sub could be made instead of a paper cone, seen carbon fiber n aluminum but a clear sub that be different
Sorry but they look like the old DD 1500 Series 🤔
@StockiGTI
4 жыл бұрын
@@HexiBase sorry of my coment offended you on any form, it just a thought...
no 6.5 = :(
@craizygolf1980
4 жыл бұрын
I agree, im very interested in 6.5" for my yukon xl
I dont mean to be rude but i really dont understand the reasoning behind huge double stacked magnets when the intended enclosure is relfex. When compared to actual pro audio equipment the car audio world is a bit, "whose got the biggest ...." type of deal.
@HexiBase, a couple of years ago I built a really nice slot ported enclosure for a a 10" tuned to around 38hz for the home theater. A couple of weeks ago, she finally gave up the goods and died. Financially, its very rough times on this front, after having to spend nearly a month in the hospital. Would you be willing to find it in your good heart to possibly supply me a 10" sub? We would greatlu appreciate it. Watching movies with no sub is like watching a movie and listening through a single sound bar. Thank you for reading sir.
@pmassey2
5 жыл бұрын
Check the local pawn shops, they usually have plenty of subs for sale to meet whatever budget hurdles you're trying to surmount.
I avoid Foam Surrounds
Was the 1k liker
HHMMM I'm thinking you should also have a line of custom or spec specific boxes for sale as well!!!! hhmmm
Looks the same as the dark audio nko subs but with a smaller voice coil and larger price tag. Go figure
Stamped steel basket....NO GOOD
I’m tired of these subs. It doesn’t take a genius to figure out that Sundown, CT Sounds, DD, and a bunch of other prands are using the same manufacturer for these subs. Only main difference is the logo on the dust cap.
@DIYaudio69
4 жыл бұрын
I like these subs, priced right for a more cheap diy-er fun builds
@audio_facts
4 жыл бұрын
@@DIYaudio69 really? At $219 per 12" I think you could do MUCH better without the AD logo...
@DIYaudio69
4 жыл бұрын
@@audio_facts you've used em then? So you know?
@hom2fu
4 жыл бұрын
the spider look like one of the pyle sub that i have.
@bdc211
4 жыл бұрын
this maybe the same as the cheapest sundowns etc, but that is not an sa series or above.. my sa 8v3 would eat those things, and thats nothing.... it just depends on what models you choose.. at least imo..
Anyone else thinks he is just making all those number up lol
@alphaomega8373
4 жыл бұрын
@@HexiBase lol Still waiting on you to use the words "Dip Gyro"
600 rms for $219.00, no thank you.
@AWThethrower
4 жыл бұрын
Tau M'howell hahaha stick to your shitty fusion then.
Why would u buy these when skar is better n cheaper
Coupon code is no longer valid.
Pressed steel frame. No thanks. That thing screams cheap.