Thanks for making this! Lot's of details covered. There are some other features too which can be found in our manual including ratchet and tap recording mode :)

@BasariStudios

5 жыл бұрын

Thank You Sir! For making the Module. I will most likely do another video on Ratcheting and Tap Recording ,,In Use''.

Nice overview! One thing worth mentioning is that you can hold down the button on most of the EDIT functions like Swing and Probability to apply a setting to all tracks. Oh and you can also hold down the SELECT or EDIT buttons to quickly access parameters then exit the menu once you release the button.

@BasariStudios

5 жыл бұрын

Thanks Scott.

Awesome video! Thanks for taking the time to explain the module.

The best tutorial about steppy Thanks

@BasariStudios

Жыл бұрын

Thanks

This helped a lot! Thanks! I kept laughing every time you said it was easy but once I was at the end I thought I learned a bit more than before I watched the video! Thanks!

Thank you! Very clear and concise... 👍

exactly what i needed, thank you!

Great tutorial, thank you!

Great review!

Thank you! Great tutorial.

@BasariStudios

4 жыл бұрын

Thank You

Helpful, thank you!!

Great video! Thanks

Great demo thank you.

@BasariStudios

5 жыл бұрын

Thanks Mark.

Great demo thank you, mine is in the post.

@BasariStudios

4 жыл бұрын

Thanks Mark. Its a great Sequencer, you will love it.

Thank you for the video. I have a question that I am not sure you talked about in the video. When I start my sequencer (its a hybrid system ableton and getting clock from toraiz squid) my entire sequence on every device starts from beat 1like it should...except the Steppy? Is this a setting? I think its the RST setting, but I am not sure what wire goes to the RST in? Very new to this can someone please help, Thank You

Great guide, thank you 🙂👍

@BasariStudios

3 жыл бұрын

You are welcome.

great video!

great video, thank you :)

@BasariStudios

5 жыл бұрын

Thanks

Thank you!

This is F-ing awesome

Thanks! ems to work a little like the drumsequencer of the Arturia Beatstep Pro just as a eurorackmodule. I need one :-D

Not sure if it's easy to use or if you just explained it well :P Great video!

@BasariStudios

3 жыл бұрын

Thanks! 😃

Thanks a lot for this Sir!!

@BasariStudios

5 жыл бұрын

Welcome and Thank You Guido, there will be more coming. Subscribe for new videos.

@GuidoAlonso

5 жыл бұрын

@@BasariStudios Done

sweet video

@BasariStudios

3 жыл бұрын

Thanks!

thanks!

I have a problem with the LED Showing , only when i select modes , it flashes . Only the led of the clock in is visible . how can i fix this ?

Can you only divide the clock? Or, can you also multiply?

@festuswilliams654

Жыл бұрын

Multiplication is a very tricky thing to achieve because the module cannot see ahead in time and usually need a steady clock. Division is far easier to implement.

Am I right you are using the Tiptop 808 drum modules?

@BasariStudios

3 жыл бұрын

Yes

Stay simple. Too complicated for a person that just bought it. You are an expert. I just got this out of the box. Just want to make it run 4 tracks.

Super useful tutorial- I thought… I bought this module, partly on the grounds that this video made it seem super-easy. Big mistake. This has got to be the most complex and baffling sequencer I have ever encountered. After several hours poring over the manual I finally got a sequence playing, but in addition to making it seem easy to use, this video doesn’t mention that Steppy is incompatible with perhaps the most useful clock in Eurorack- Pamela’s New Workout- and therefore probably every other clock in the game. I have no idea what standard it works to, but it is NOT 24ppqn, which I was always led to believe was universal. Pam’s only goes up to 300bpm, at which tempo Steppy is still sluggish, and as it only has a clock divider option (no multiplier), sluggish is as fast as it will go. As an illustration of just how complex this thing is, the manual comes in at a stonking 39 pages. The Qu-Bit Bloom manual is half that length. Behringer’s 960 has a manual of just two pages- though admittedly the typeface is tiny. Be warned. Be careful. Don’t be fooled by a misleading video about a gate sequencer that can barely break into a trot. Unless of course the one I have is faulty, in which case I will be having my money back, thank you…

@daemonicflame

2 жыл бұрын

you probably need a better clock, something like the Apogee PSX100.

@sub-jec-tiv

2 жыл бұрын

I have a Pams and it clocks my Steppy just great; Steppy is *not* incompatible with Pams. Pams is a super solid and very versatile clock. Nothing personal, but it seems you don’t know how to use your Pams. Any channel on Pams can output a clock of whatever speed you like. Just go into the edit page for that channel, and give it a faster subdivision. It’s that simple. If you don’t know how to edit individual channels, it’s super easy. The manual is great, and there are lots of tutorials including a great one by Divkid. Happy stepping!

@joshk2181

Жыл бұрын

It’s either faulty or you are very confused individual

@EntropicEcho

Жыл бұрын

You must be missing something. I'm using Steppy together with PNW quite satisfactory. I hope you've figured it out by now! :)