Whoever edited this is a legend.

I have used car builders products on my other vehicles. Products have been easy to work with, fantastic quality. I now have a van and I have been looking for an easy way to insulate, looks like I'm going to use car builders again :)

VERY good video. Great explanations and no p1ssing about. Well done Brendan.

Finally someone with common sense, talking about NOT overdoing the insulation, as so many others on u-be

Very quick and informative. Thumbs up

@carbuilders1

3 жыл бұрын

Glad it was helpful!

This is excellent. Clear as a bell.

Great video, nice and concise, i will be using a very similar method with my van, cheers

Quick and to the point fantastic 🙂

@carbuilders1

3 жыл бұрын

Thanks Paul.

great video guys very informative 👍

I really like the simplicity of this approach. Do you know or have a guess at what the “R” value is of insulating with this approach? Thx!

Great info!

Great video, Can I do the same on fixed windows or I must replace the glass with some sort of metalic sheet? How would you insulate the floor?

awesome, is the same 3 step process done to the floor of the van aswell??? thanks.

I came across your channel and was wondering if you ever thought of using denim insulation in the car?

3 years living in my van I ain’t insulted mine . The insulation ain’t enough to to keep you warm ! I just leave my eberspacher heater on most of the time well in the winter easy and cheap 😂

Hi mate, did you cover up the drainage holes in the back right corners of the floor of the van or leave them open to drain any moisture out? I don't know if it will cool the van down too much leaving them open or if they need to stay open to let water out

Hi I am about to start my 2021 VW Crafter and want to use your products . I will chase you guys up.

Very informative video. I have a question. How many rolls of each of the material would you need to complete a medium height van? Thanks

@jordanhanson316

5 ай бұрын

Proper XPS or other insulation would provide better insulation and R values

This insulation method makes the most sense to me. I personally feel that the 3rd stage could be done by attaching reflectix or similar to the inside of whatever wall you choose and then mounting the wall panels. Great video! 😊

very neat and tidy. so you stick the themal stage 2 on straight on top of the deadener? no gap?

@carbuilders1

2 жыл бұрын

That's right. The Van Liner goes straight over the sound deadener. If you are then putting in walls, this gives you the opportunity to create an air gap. Line with Van Seal to create further insulation 👍

Recommendations on insulating a fiberglass conversion top van ?

This is great, but how do I get this material in the US?

Great concise video! Can I ask how you recommend creating the air gap between layer 2 and 3? Are we banking on the shape of the van wall and the rigidity of layer 3 resulting in a gap, or something more deliberate? Thanks!

@carbuilders1

2 жыл бұрын

Hi Ciaran. Yes, this will be governed by the van construction but most vans will have an inner skeleton structure which creates this air-gap cavity.

@RobKoier

11 ай бұрын

Why do you need the air gap?

@patrioticmisinformation7184

10 ай бұрын

@@RobKoierair gaps are how insulation works. Basically.

@jordanhanson316

5 ай бұрын

@@RobKoierdo insulation like XPS foam, better than just an air gab

@FromMetayou

4 ай бұрын

​@@RobKoierthink of it as layering clothing

Hello guys im very interested in your product!!! The stage 3 is reflective thermal insulation? How i can buy it in Europe?

Does the van lining need to cover every cm of the van’s metal sheeting? Or are tiny gaps ok?

Is the stage 2 material or something comparable available in the US?

I'm upfitting a cargo van for perishable product transport and sound isn't much of a worry. Does the sound deadening help at all in the overall heat reduction, or is that a piece I can skip?

Does this prevent smell also?

So you're only using reflective material for insulation? What is the R-value that you get from that?

Three layers of thin material when combined looks like maybe 10 mm. No mention of R value for these three thin layers. I found myself waiting for the application of XPS foam board or closed cell spray foam and it did not come. This looks like a skimpy solution for the client but a great deal for these folks selling their products. Do your research people. Check out Chuck Cassady (KZreadr) who has been building insulated school bus conversions in Colorado for 18 years. He knows what he’s talking about.

so is there a gap between layer 1 and 2m

People do sound killer under Armaflex too. Totally not necessary. What's the R value in that thin isolation?

Hello, what is the product name you have in the last layer?

What about mold and condensation does this stop that

Layers keep you worm !!

so you've opted to not use any sort of wool or plastic fiber insulation, could you comment? thanks

Hi Guys. Love your products. Please make a video about van seal installation. You don't cover it in any detail in any videos or on your website. Thank you.

So not using earthwool at all? What if the condensation dont get absorb by anything and wont evaporate if the outside temp is not hot enough?

How much would it cost to be a decent size caravan?

Is any insulation needed between 2nd and 3rd layers ? Or will that be overkill ?

@carbuilders1

3 жыл бұрын

Hi Gavin. Air acts as a very effective insulator. You could put insulation batts in between the Van Liner and Van Seal for a minimal improvement (2 degrees). Batts with Van Seal (but without Van Liner) is about 3 degrees less effective than Van Liner and Van Seal. We have a video of these tests coming out shortly 👍

@karentruempy397

2 жыл бұрын

Is there any issues with moisture and condensation between the layers? If so, how can that be taken care of? The materials you are using dont look like they would mold, but if there is condensation or moisture could they eventually rust out the inside of the van, especially if there is no place for the moisture to escape or evaporate? ( or would a dry air heater take care of all that?) Thanks!

damn you wont have much of the car left after all them layers lol kidding ofc, good video 👍

hello, can you show us internal temp vs external temp :D because flir cameras ....is not helping too much

@carbuilders1

3 жыл бұрын

Hi K5UAL. Sorry, we will have a video out shortly which will do just that.

Why would you use the sound deadner if you are sticking armaflex of k-flex directly to the walls and roof anyway ? Waste of money and adds unnecessay weight as panels were you stick the insulation to won't resonate either.

@glenncallow1454

2 жыл бұрын

Different products doing different things. As for added weight, when you’ve filled the grey and fresh water tanks… and fuel, then come and talk about extra weight in the foam panels. False economy. Don’t forget that old saying, The bitterness of poor quality remains long after the sweetness of low price has long gone.

@Charlemagne1367

2 жыл бұрын

@@glenncallow1454 then explain please...flat sheet metal resonates, once bent like the wheel arches resonance is a lot less. And even then we build casings/cupboards around the arches, which can easily be covered with armaflex on the inside. I understand the car industry likes to sell stuff ofcourse. Try one backdoor without sound deadner and one with just armaflex, a hint the insulation covered door will sound flat, no resonance. This guy tried it....kzread.info/dash/bejne/ZGiqpZeDY8XQm8o.html The little resonance that maybe lingers will be absorded/dispersed by the interior of the van cupboards, bed, etc... On a lightweight build every weight saving adds up, no water tanks here.... My observations have nothing to do with poor quality just experimenting and eliminating the superfluous and unnecessary expenses.

@yyz2go2112

Жыл бұрын

@@glenncallow1454 Well spoken Sir!

#vanlife

lol just put actual insulation in the gap between the wall and wood million times better r value and way way less cost

@bogdancuciuch7063

Жыл бұрын

Low cost low results. What u Gona do with the mold and moisture acumulation?

@melaninduh7962

Жыл бұрын

Use That Wool Stuff That's Anti Moisture & Anti Mold

@bogdancuciuch7063

Жыл бұрын

@@melaninduh7962 how can a wool be antimoisture :)))?

@thedane738

8 ай бұрын

​​@@bogdancuciuch7063 because it is...if you dont know , dont answer... and you obviously dont know. Read about sheepswool, Rockwool.....then you learn.

@hiko8822

8 ай бұрын

Because its... wool. Havelock wool doesn't absorb moisture. If that doesn't satiate, then you use a secondary vapor barrier.

This is conflating convection + conduction with radiation and so much more. The radiant heat is reflected by the foil fine, but with the "heated chamber", (your words), hot air between the 2nd layer of insulation and 3rd, it's now a case of how do we deal with that. This system doesn't even understand what its about so there's overkill, waste and way more cost than a solution that based on logic and minimal cost. Anyway, you sold my missus on it because she's off to blow the bank on your retail priced repackaged chinese gear yay 3:57

I don’t think this is the best insulation for a van, having a 1 inch air gap is not better than having a xps or any other insulation in that gap. You would more than double the R value just by adding insulation in the gabs.

Nah mate, I'm gonna go with aircrete....