I'm a real electrician... And there's a few things that are wrong in this video. 1. Your house being built after the 80s does not necessarily mean you have a neutral. 2. The load it not normally on the top screw of the switch, it could be either. 3. That neutral splice was horrible 4. The hook on the ground terminal should be going clockwise, so that the hook will tighten under the screw instead of coming off

@above8762

2 жыл бұрын

Is there a solution to use this if two switches control the same lights

@adfadgaqgv

2 жыл бұрын

@@above8762 not yet

@antonioolvera1467

Жыл бұрын

What if I have only 2 wires? Will it work?

@adfadgaqgv

Жыл бұрын

@@antonioolvera1467 just a black and a white? Then no. That means the switch is getting power from the box the light is in, sending power to the switch box on the white wire, and the switch sends it back on the black wire to turn the light on. Because of smart switches whenever we rough wire a house I try to make sure there is a neutral wire in all switch boxes.

@deannalegeyt2190

8 ай бұрын

I wanted to use this device for my outdoor holiday lights, so next to the switch I also have a GFI plug that is connected to it. Is this device compatible? The light switch only has line, load and neutral wires, but the GFI plug has 1 black wires, ground and 2 white wires. Any suggestion on getting this to work?

We ended up exchanging this model for the slimmer version kzread.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.

OH MAN. I have waited for this! ALL I NEED is 3-way switch version (that is able to go behind a typical plate... I have some double switch boxes) and I am in business.

@dgreer5537

2 жыл бұрын

Yea, that should have dropped simultaneously

That switch is pretty big. Going to have problems stuffing it in a single gang box that might already be crowded...

@JohnGettler

2 жыл бұрын

Show me a smart switch that isn’t “pretty big”.

@popie6735

2 жыл бұрын

@@JohnGettler The fact that they're all big isn't the issue. The space you have to fit them in is. And the fact that they're all big doesn't make it OK for this one to be big too...

Ok, that ground wire is 4:49 is messing with my OCD. The loop goes clockwise so that it is pulled in instead of pushed out when tightening.

@canman3939

2 жыл бұрын

Yes..wrap in clockwise position...!

anyone else get the "Cave Johnson here!" vibes? totally should have hired JK Simmons for this..

@70CobraJet429

2 жыл бұрын

I KNEW I recognized that voice from somewhere...

@techie8359

2 жыл бұрын

My God boomer

Great to see this new product at the Wyze pricing I expect. Now, I can afford to smarten-up more of my home’s switches. I am also looking for a 3-way (and 4-way) compatible Wyze switch. I’ll be waiting with my finger on the Pre-order button when you get there. Also, nice video, but I have never noticed any significance with where the line and load wires get attached. Anyone doing this should use a simple non-contact meter to confirm power is off before touching any wires inside the electrical box.

@cfletch85

2 жыл бұрын

Ditto... Though since they launched this... I'm guessing the 3-way is right around the corner.

I'd love a double switch version of this.

If BlueTooth not pairing then HOLD the Wall switch down for 20 seconds until it flashes SLOWLY. Then pair again

this video is ok for me or someone that know the basic in electrical wires, but for anybody else, you could use more info like: LINE is the cable that carry the power from the power sourse (electrical panel) to the smart swith, the LOAD cable is the one that takes the power from the smart swith to the light........... something like that

@GuidoLoko

2 жыл бұрын

You taught me something new man! Thanks!

What if I am replacing one of two switches? Is there a wall plate to accommodate one Wyze switch next to a common switch? Or a Wall plate that covers second switch (e.g., no longer needed cause it's in the garage and I now have a Wyze Outdoor flood light/camera that negates the need for second switch)?

Will this switch fit behind existing faceplate?

This neutral wire should NOT be left bare outside of the wire nut.

If that bundle of neutrals is because there is a shared neutral in there, sombody is going to get a big poke.

You attached the ground wire in the wrong direction flip it over and reattach it.

I can't for my pre-ordered 3 pack to come in!

u NEED an option for one WITHOUT the neutral wire !!!!

@adfadgaqgv

Жыл бұрын

The Lutron Casetas have them. And remotes for the other side or wherever you want to add a switch

@TargetAcquisition

Жыл бұрын

Simple fix. In American houses, the neutral and ground are one. With the included white wire, tie the neutral line into the ground. Connect everything else the same.

Yeah let's order three now. Only three single switch

I hope someone got a raise for this video 😂

Are you going to have a 3 way switch replacement soon. Also when hooking the neutral tail up to the bundle of wires you should just lay next to the existing wires then put your wire nut on. And the person in the video on the ground wire he's got the ground wire the wrong way around the screw when you tighten the screw the open end should be going clockwise.

@akhosha2

2 жыл бұрын

I noticed the ground being wrong too

@marcusmarks

2 жыл бұрын

Lol... They should have an electrician watch this video before uploading it.

Will this works with Samsung Smarthing’s?

I have so many questions. First of all, I was waiting for this literally for years... But I just realized practically all my lights have 2 switches..... One for the light and one for the fan.... I saw the FAQ says it supports multiple gang setup... is there a guide for that? how would it work in regards to the area in the wall that is bigger (2 switches) than the one in the wyze light switch? (so many questions).... Thanks,

@akhosha2

2 жыл бұрын

X2

@JohnGettler

2 жыл бұрын

Wyze Switch will work for "ganged switch boxes" where you have 2,3,4 switches right next to each other. You just need to not use the Wyze provided single gang cover plate, and buy an inexpensive white ganged plate (2 wide, 3wide or 4 wide,) from the hardware store that has a "Decora" hole size for the Wyze switch, and then match the holes size for the other switches you are leaving alone.

@estossala1

2 жыл бұрын

@@JohnGettler That makes lots of sense! Thank you! I understand now!

What is the extra little breakout clip on the other side of the switch? Is that a Ethernet port or something?

@GuidoLoko

2 жыл бұрын

LOL an Ethernet port! 😂😂

This was easy to connect but it won't fit into the wall

My over head light is blinking and I can’t get the led on the switch to turn on

Would be great if it allows you to dim the lights too

@theruined1038

2 жыл бұрын

It does allow you to dim the lights...it's fully programmable.

@phungn02

2 жыл бұрын

@@theruined1038 have you try it? The ads should hilight that feature.

@theruined1038

2 жыл бұрын

@@phungn02 I waited to buy mine. I just bought 3 to try from Home Depot...so once I do I'll let you know. But I do use a lot of their products and as long as the fixture and bulbs are dimmable, the light should dim.

That nut on the neutral wire left lots of copper exposed. Obviously not an electrician making the video.

wyze really went out and hired markiplier for this tutorial

Why are the Line and Load labels sometimes blurred out?

@tristangrahn8582

Жыл бұрын

Cause they screwed up 😂 they put the labels on the wrongs wires😂

@wyze is the switch compatible with the Wyze Garage Door Remote to be used as a physical garage door opener?

@wyze

8 ай бұрын

Hi Travis! While we don’t offer that feature at this time, it’s a great idea! Our product team is always looking for ways to improve our current products and to know what our fans would like to see next. Please feel free to add your voice to the conversation here: forums.wyze.com/c/wishlist/12. 🙂

Awesome

Great 👍

Can the switch turn on at sunset then stay on for a period of hours or perhaps turn off at sunrise?

@BetoTheButcher

2 жыл бұрын

Yes. You can set it to go off anytime of day you wish.

@KyGuy2002

2 жыл бұрын

Wyze rules feature can probably do this

Cave Johnson?! Is that you?

Any reason why I can't use this to replace a switch to my whole house fan? That switch has off, high, and low. I understand that I won't have two speeds.

@wyze

Жыл бұрын

Hi Eric! Wyze Switch lets you control your regular bulbs, Wyze Bulbs, and nearly all your other smart things. It can be used for appliances that consume lesser than 15A. Though it could work with the ceiling fan that meets its power requirement, it could only turn the fan on/off and not control the speed. The same goes for other devices. That being said, please make sure that your wiring is compatible with Wyze Switch here: support.wyze.com/hc/en-us/articles/4406495405339-Is-my-wiring-compatible-with-Wyze-Switch- If you're still unsure about your wiring compatibility, we would suggest consulting an electrician. Hope that helps!

How do you fix the "bind switch error".

@wyze

Жыл бұрын

Hello Jubilee! Our support team would be glad to look into this further. If you haven't already, you can reach them by submitting a support request using this link: support.wyze.com/hc/en-us

Finally

Or you could just make a switch that fits over the existing switch, with a motion sensor on it. And you could set the length the light stays on

What if I have no neutral wire?

@wyze

Жыл бұрын

Hi there! While Wyze Switch is currently not compatible with neutral wire systems, it's been a popular request. We'll make sure to pass this feedback along to our team. Our product team is always looking for ways to improve our current products and to know what our fans would like to see next. Please feel free to add your voice to the conversation here: forums.wyzecam.com/c/wishlist/l/votes. 🙂

@antonioolvera1467

Жыл бұрын

​@@wyze So if my installation has only 2 wires won't work?

@wyze

Жыл бұрын

Compatibility for Wyze Switch would depend on two factors. Are your lights controlled by a Single Pole? If your lights can only be controlled from a single light switch, then it is a single pole switch and is compatible with Wyze Switch. Do you have Neutral Wiring? If your house was built after 1980, then you should have neutral wiring. If built before 1980, then you need to check your wiring. Need more information?

Wyze App or wise ass?

Who is the voice actor haha

Bummer, my house was built in the 60’s and has no neutral.

@RobLerman

2 жыл бұрын

Interesting, mine was built in 1959-60 and does have it. All depends on electrician who did the work.

@TheJorgecpu

2 жыл бұрын

I ran into the same issue my house was build 1925. I bought the C by GE 3-Wire On/Off Paddle Style Smart Switch it doesn’t require a neutral an you can connect it to google/Alexa. It only needs a line, a load an a ground cable cost me $30 on Amazon

Well I have to say other than a few things wrong in the video it’s pretty good , but me being an electrician and all I need to point these out . 1 you turn off the breaker and then test it , 2 at a switch there is power in and maybe power out but just for what was really bothering me , I will give you that power is the line but where is the load ? It’s called a switch leg cause it goes to the $@-&);” light that it controls so please for the sake of the diy people out there can you please use the right terms or just tell them to put black to black and white to white unless of course you sending power up on the white lol

Is this Markiplier?

You forgot to show how people can remove the faceplate before installing.

@wyze

Жыл бұрын

No worries! We've included how to remove your initial switch's faceplate right after the turn your power off when you begin the installation.

Why Wyze keeps ignoring 220V 50Hz users? But also users without non neutral wiring 😔

@SmokeandLights

2 жыл бұрын

MOST smart switches require a neutral wire, because they require a return path for the control circuit to work. As for the 220v 50Hz, Wyze is still mostly in the US, and we don't use that here. As they grow, I'm sure they will expand their offerings.

Wyze at 2:13 he says "if there are more than 2 neutral wires in the bundle you will need the accessory wire, if you only have 1-2 neutral wires you can skip this part" this is completely wrong, no matter what you have to use the neutral wire

@SubZeDiZeD

Жыл бұрын

You missed the point completely... If you only have 1 or two, they will fit just fine in the switch clamp, if you have a whole bunch, it will be too thick for it, so you have to use thay standalone wire

Is this funny?

The voice-over is annoying. Please get someone else for future products.