The guy doing his best then idiots wanting to slam him. Good job and tnx for the video

After watching this video, I immediately bought a vinyl sticker online and couldn't wait to try this myself. Thank you for the detailed tutorial. Now I can open my own shop of installing car stickers 🤣🤣🤣

@CHRISTOPHERSTEWARTHAIRDRESSING

2 жыл бұрын

After hearing your success, I bought a hole load of stickers for my business and I apply them free on any cars parked near my shop - our competitors think we have 600 company cars haha free advertising on strangers cars

@ianfairbanks1318

11 ай бұрын

@@CHRISTOPHERSTEWARTHAIRDRESSING after hearing of your monumental success I too bought a load of "Summit Racing" stickers and have put them all over myself. MY income tripled in 3 months. THANK YOU THANK YOU THANK YOU!

@CHRISTOPHERSTEWARTHAIRDRESSING

11 ай бұрын

@@ianfairbanks1318 after absorbing all that positive energy from your monumental success- I took "MASSIVE ACTION" and bought some of your summit racing stickers from yee- my clients were buzzing to find out that included in the price of a haircut, they get a free dump valve, a pop and bang remap and our free stickers. Can only comment on this week's sales - We were "cut and blown" away!!! ( aggressive dump valve n hairdryer noises)

@CHRISTOPHERSTEWARTHAIRDRESSING

11 ай бұрын

@Ian Fairbanks like the idea of your channel - what you driving and what have you reviewed so far bai?

@banginzaza

2 ай бұрын

😂😂😂

That last bubble was driving me nuts. I was like "PLEASE GET THAT BEFORE THIS VIDEO ENDS!!!" But he tried. And didn't get it out... And now I'm ruined.

@norville_cooper

Жыл бұрын

Yeah buddy, I had the same disappointment...

@banginzaza

2 ай бұрын

Y'all funny 😂😂😂

This video is great. Super informative and easy to follow. And not annoying background music.

Great straight forward demonstration .... thanks for the video

This is the best tutorial I've seen so far

Awesome tutorial! Thank you!

Good video. Never thought about putting the tape in the middle and do part at a time.

Nice tutorial. Covered all the basic things, how to avoid certain pitfalls, and using a hinge. I would’ve used painters tape; but wow,…U made it very Understandable, because he explained everything! 🍺

Great video and explanation!!! I think am not afraid anymore of applying my decals to my car.

Doing a couple big ones tomorrow and this helps me strategize well for it. Merci.

@kristopherrainbolt2617

Жыл бұрын

How did they go?

@ticosceninc.elsdexpertsfda7713

Жыл бұрын

@@kristopherrainbolt2617 got them on well using this technique.

@kristopherrainbolt2617

Жыл бұрын

@@ticosceninc.elsdexpertsfda7713 have they held up?

Thanks for the upload mate 👍👍👍

This is a great tip Tony !!

First time watching. New Sub. I was so anxious waiting to see that vinyl cut lol. Then you said like we did with the dry application. So now I have to go find that video of yours 😊 lol

Amazing how you managed to explain how to NOT have bubbles while purposely ignoring the fact that you couldn't get one of the bubbles out.

@tigeabenton2174

2 жыл бұрын

If you use vinyl you know just to poke a tiny hole in that bubble then smooth it out

@craigandsnowwadam4511

Жыл бұрын

Yeppers,..it takes a little pin prick ,..then there b no more Awwwwwwwwwww!!!! LOL rule of thumb is you can prick your bubble ,..but never ,….. your turn ,..please leave a comment below ⬇️.

@MiddyBlue65

Жыл бұрын

You did a very spectacular job. Enjoyed watching ur vid. 👍🏾

@dlmanolo437

8 ай бұрын

maybe he didn’t want to focus on that, @sshat!

@dlmanolo437

8 ай бұрын

@@tigeabenton2174no need to poke a hole if your using the soap and water nethod

Great tutorial. Thank you

Excellent Video! Thank you

This is one of the best putting vinyl stickers

thank you! after watching this your video gives me condfidence to due my own graphics! god bless you!

I use straight water and that worked well too

Amazing video. Thank you.

Terimakasih.. video yg bagus Ternyata teknik pemasangan sticker di Body Mobil mudah sekali..

Thankyou for sharing, really good tutorial. Great tip with the hinge!

Great video Thanks !

I’m applying a custom vinyl back to my iPad using this method!

Good on ya mate.

What brand vinyl do you use?

Can I do the wet application method on any brand of vinyl?

Does any residue stay behind the sticker? I've see people use alcohol or windex as well, what are your thoughts on using them?

What kind of transfer paper is that and where can I get some. I've been using the clear transfer taper and it's not that easy to remove

Thank you

Thank You

So you are using water with just regular soap? And the vinyl would still stick after it is dry?

thank you

Can you still use this method on a car that's been vinyl wrapped?

I really would use a spray setting of wider, for better coverage--the pointed spray just misses too much, IMO. One question: how can the wet side ever "cure" with a soap barrier? I don't pretend to know, but I would think? we would want a totally clean surface with some kind of adhesive to bond with the painted metal--no?

Thanks man

The bubbles will eventually lay down after the water evaporates. If you still have a couple tough ones you can pin the water out. But wait a few days for it to layout

Sorry, but i think you can use your queegee before you remove the paper from the decal to remove all the air bubbles and soapy water. In that way you minimize the risk to damage the decal and add scratches to it and the paint...I there is any little bubble or water in the decal, use your squeegee just on the particular area...

Serious question - how much HP did this give you?

Good job !! Ignore jealous people,

Waiting 10 minutes before trying to remove transfer tape helps

@TxSavage1791

2 жыл бұрын

Once you've applied the vinyl on the car? Wait 10 then pull tape off?

@kimmywong9995

Жыл бұрын

It all depends on how wet your vinyl is. If it still can move just leave it until it sets into place.

All I could focus on was that one small bubble

@twotiresonley8795

2 жыл бұрын

Just pop it with a pin. No big deal

@getit9066

2 жыл бұрын

@@twotiresonley8795 That's _just_ what they'd be expecting . . .

Like a professional

Good tutorial but the bubble was still there on rear door and was ignored hoping it wasn't noticeable 🤦‍♂️

Better, easily understood than most. Good job.

Awesome

Something I have never understood how does that soapy water not affect the adhesiveness of the vinyl sticker and is there any special kind of soap and water mix that she used to do that so it won’t affect the sticker

@mrmgjohnson

Жыл бұрын

2 small drops of any dish soap( I use dawn) in approximately 500ml /16oz of water. most of the soap/water gets squeezed out , but a small micro layer actually promotes the adhesive to stick better as it evaporates. When it's 100% dry, the soap actually helps it stick better. The wet method is exclusively used in window tinting, when this is done, the window actually starts out hazy because of the soap/water mixing with the adhesive and as it dries, it becomes crystal clear. This is the same with the vinyl decals, you just can't see it. hope this helps.

@BenBreeg1138

9 ай бұрын

I would think that the dilution makes the soap act as nothing more than a surfactant, just eliminating the surface tension.

Thank you it worked perfectly !

Could you use denatured alcohol instead of soapy water?

@alexgroger8765

2 жыл бұрын

Soapy water is the way to go. Denatured alcohol has the potential and risk of eating away at the adhesive that bonds the decal to the panel.

@samuelmeeks2158

Жыл бұрын

@@alexgroger8765 what is the Soapy water mix like the best soap in your opinion and the ratio soap to water ?

Adds 50 hp to that mini van. Thanks though very helpful.

Just cant wrap my head around appying soad to glue. But yeah.. great job. Thumbs up!

Will this kind of application work on windows too?

@TxSavage1791

2 жыл бұрын

Don't see why not that is how the tint on your car is down .. (missing a few things BUT soapy water is your friend)

Great tutorial, what's soap/water mix ratio

@mikekersten3776

2 жыл бұрын

With a 32 ounce bottle you need just 3-4 drops of soap. Like Johnson and Johnson Baby Shampoo.

me: "you say flawless install but that's a huge bubble you cant just" he wipes it out " - oh okay nevermind" great video

It was great, but I watched the whole thing to see how you did the cut on the door...

Think this would work in the winter? Or would water freeze rather then evaporate

So should I wet the backing paper?

Should have watched this before I did mine lol.

Good tutorial, I some how managed to get a crease in my vinyl 🥲

@tigeabenton2174

2 жыл бұрын

😔 😢 A crease??? That’s almost impossible. How’d you do that?

@JohnDoe-nz6bk

2 жыл бұрын

@@tigeabenton2174 I just did it to mine. Don't know how it happened. 🤦‍♂️

@tigeabenton2174

2 жыл бұрын

@@JohnDoe-nz6bk Awww man. 😞 Heat didn’t help?

Did you only apply it to just that one side?

I like this other video where they guy just sprayed soapy water all over the spot. This is good too though.

Didn’t work made my decal not stick anymore

stares at big bubble on back door

This has to bee on you too even if the tape don't stick, stop blowing on V.H.S tapes for gosh sakes, lol

Not sure why you are not using the felt side of the squeegee. The rough side can scratch the vinyl UPDATE: Ok so after working in a print shop for over 5 months now, i realized that it's ok to use the solid side of the squeegee. It also depends on the masking you re using and the vinyl also. you never want to apple to much pressure!

@alfonsaberg4551

2 жыл бұрын

@Richard Deckard That you've ever seen.... Mate, we all know that's a lie.

@tigeabenton2174

2 жыл бұрын

I’m the dry app he used the other side 🤔

He never came back....

Is that dish soap in the soapy water or some other type of soap?

@doanelinde7746

3 жыл бұрын

It's dawn dish soap, he says it

car wash is recommended.. dawn dish liquid is too harsh

Dude... what about THAT BIG BUBBLE???

1 single breeze and his sticker was done

All u need now is some rims so your groceries can gleem lol you went way to far for a graphic sticker

Quite a bubble remaining on the right.... So your method fails.

Can't believe he picked up the graphic straight from being on a dirty surface to apply it!! Don't ever do that! Wipe it first!

I like the method but was a bit too careless with it in my opinion. Take your time and be meticulous.

Yikes🫧🫧

On a van lol

All you need is water lol

Ignoring the spec of something under the vinyl that you couldn't get out.... fairly certain the soap/water ratio was off a bit. I'd also strongly recommend leaving the transfer paper on for at least 12 hrs as removing it can pull the decal back off

Step one: COVID

This video has tinnitus lol

Mans dont drive vans lmao

Installer? 🤣🤣

Comedy show

Can you speak into the microphone, please? :)

Audio sucks. Stopped watching immediately

That is a depressing driveway. 😕

@mickfitz76

2 жыл бұрын

Kicking up dust into the decal.

This video has tinnitus lol