passed the brick laying part of my course. the lecturer said there was no hope for me until i started watching ur videos and now i have passed the practical with ease

@seniorgolfprogress83

5 жыл бұрын

Well done Declan that’s a great achievement keep the good work up pal ignore the bad comments👍💪👏

He really is an artist with that sealant gun!

You guys do an amazing job and always keep the work area tidy. I’d definitely use you for windows and doors. I’ve been a joiner 17 years but i really dislike working with plastic.

Good to see you got some tools sorted from someone who recognise your value to the craft Stu 👏🏴󠁧󠁢󠁳󠁣󠁴󠁿

Ain’t easy not working Stu!!!Welcome back KC!!! Great work nice finish and Barry loves chocolate 🍫 👍👍

Nice job, good to see KC grafting!!

Good work on a hellishly windy & cold day.

I'm a plumbing apprentice but love the videos 👍

Another quality job boys , great video as always , show these other U Tube amatures how it's done properly !!!!

Great video. Keep up with the great uploads

As always Stu nice job from the boys

Top job again mate kc new jeans need get some sealer on them 🤣👍

Great job and clean and tidy thanks to kc as allways.

Thank you , Stu .

Nearly 50K 👍🏻🏆

Down in Kent they don’t put that filly foam under sill they leave that out for ventilation 😂😂

Pekerjaan yang sangat baik.... I love it

I usually give the sill a 2 inch overhang each side like on the kitchen window

@seniorgolfprogress83

5 жыл бұрын

Hi Robert we never do that because it does weaken the cill in the past I have seen cill curl Never do it on rosewood or coloured stuff thanks for watching

looks like theyve gone down a treat! 👍

Serious a day in your life is like a day in my life except today we’ve been dropping lath and horse hair ceilings....minstrels :)

@paulmurphy9929

5 жыл бұрын

More like fruit salad sweets that foam

Nice job.

Very decent job that hop along 😀😀😀😀😀. Hope the foot gets better soon. Your defo on subs bench for Saturday 👍👍😀

@Stucrompton1

5 жыл бұрын

Sometimes I listen to limp biscuit 😁

What the best way to get the sides off the sliding door to allow you to screw into the walls

Slot head screws ahhhhhhhhh , your dads mate Barry does he keep pigeons in his spare time ( use a rag scurvy bugger ) nice work again , keep it up stu 👍👍😂😂

top work

Tidy Lads!

Nice job

@craighughescraig6096

5 жыл бұрын

Can you follow me on Instagram please. Craig3480 👍🏻

Window fitter by trade, then come home and watch your videos 🤦‍♂️ keep up the good work 👍

@Stucrompton1

4 жыл бұрын

Nothing wrong with that bud

Sabes de todo lo felisito soy de colombia y me gusta como trabajas

Love your vids mate. Very good at showing how's things are done. Just wanted to ask how the frame of these doors are attached to the cill that you glued to the bottom brickwork please? And is the frame just screwed on the 2 vertical parts of the frame too? Keep up the good work Stu & KC. Also get well soon 👍🏻

@Mark-lm3ye

5 жыл бұрын

There plastic kick plates that go around the outer frame of the door. You can fix to the cill underneath the fixed frame before if you take it out and there’s a kick plate in front of the master door that you can pull off and can fix to the cill through there so the fixings are concealed .should be at least 4 fixings down each side and you can fix the head of the door to the lintel if you need to but you shouldn’t need to on a door that wide

Stu can you do a how to heel and toe a pane of glass in door

Top class

stu!! you should of jumped on the lifting and let KC do the recording LOL

@frisby912

5 жыл бұрын

He's done his ankle in buddy.

Hi Stu just a quick one am I right in saying you only need to seal the vertical parts of PVC patio door frame to house exterior brick work as well as top horizontal framework and that no damp proof material is needed, what stops water/rain penetration from being drawn in from outside to interior of house? do you use waterproofing sealer on exterior brickwork?

Will be diying a similar job soon but need to make sure there is no drafts when i'm finished as house is very exposed. Do u ever use airtightness tape guys? Or is the sealant enough do u think?

Bet lifting that glass was a “pane”

@isyt1

5 жыл бұрын

Paul Mcgeoch - yeah afterwards they looked shattered

@Stucrompton1

5 жыл бұрын

Yeah but it was worth a cracking job 😂

Tell you what stu , Kc good with that sealant gun 👍

Nice job Stu. Are you gonna be doing the best bricky train again where we get to send in our pics and they get shown in a video?

@Stucrompton1

5 жыл бұрын

May start it again this summer

How did you manage to make the patio slide? Wheels under it or somethibg

Hi Stu, really useful vids and thanks for uploading them. I want to replace a window with sliding doors, but I'm unsure about whether I need to support the brickwork above. I don't see a lintel visible and have been told that might be because there's a steel plate type running along the lower edge of the course of bricks. Any suggestions about which way I should go about it please?

@seniorgolfprogress83

5 жыл бұрын

Hi ged How old is the building

@cardiffpicker1

4 жыл бұрын

If you are keeping the existing aperture width and just removing down from fill to floor then the existing lintle will be sufficient.

Ya he mirado muchos de sus trabajos de cambio de ventanas y marcos, lo que no se es si los pernos o tornillos los ajusta directamente por el ladrillo o usa tacos de pvc o tarugos....? quien me puede contestar.

👍

Do you fix through the top of the frame into the brickwork lintel as well?

@johnreynolds2055

4 жыл бұрын

I don’t believe you do

@mrbachittarsingh9243

4 жыл бұрын

J G I do believe you don't.

Great video! Which expanding foam did you use?

Can you set the cill on a bed of silicone or does it have to be expanding foam??

Hey Stu 👋, First, we hope your ankle is feeling better, and 2nd, when you guys are working putting glass in doors and windows, is it harder to do when the wind is blowing the way it was on this day, or does it not really have an affect on the job?

@Stucrompton1

5 жыл бұрын

It was pretty windy but we managed it sherry 😁

No silicone on the cill before you lifted it in?... Also you're supposed to take the covers off the sliders either side of the jams so you don't see the fixing screws 🤦‍♂️🤦‍♂️🤦‍♂️

Blarn a feckin hooly down there wor kid 💨

😁👍

Seemed like a big gap round that frame, did you foam the gap ?

@seniorgolfprogress83

5 жыл бұрын

Hi Andrew the frame was measured to perfection that is what you have to do on this type of door if you look on the inside there is a perfect amount of frame showing if you don’t reduce these doors you could lose your frame on the inside hope that answers your question thanks for watching👍😉

What size is this? Thanks

👏👏👏👍

Nice vid, who is the soundtrack music by?

Стеночка в полкиприча.! Это жесть. Не холодно.?

Spray foam looked like 🦄 💩

😁

It's a shame that they didn't pay s little extra and have bi folds instead of those sliders. Nice video though thanks. 👍🙂

How you call these bugs or what is they at 7:24?

Yeah I aggre

I hate to see people with old ally sliding patio's, such poor security...

@cardiffpicker1

4 жыл бұрын

I could be through that new pvc one in seconds aswel

@johnreynolds2055

4 жыл бұрын

cardiffpicker1 🔨

Buy some dust sheets ;-)

@seniorgolfprogress83

5 жыл бұрын

Hi Dave we’ve got dustsheets lots of them but the old curtains are so much better on wooden floors so that’s what we use on that type of job👍😜

First Second

RJM@54 3/14/2019 why were you not able to help your father & friend on this project instead switch to the roll of camera man