Who's ready for Part 3!?

@joseluisruiz3789

3 жыл бұрын

Here!!!! I can't believe what you had to work with. I haven't seen a wire mess like that in years, The VCR was Nostalgic though.

@darrianbenjamin7292

3 жыл бұрын

Drop it!.I'm new to the channel but I like the fact that your videos and vehicle are more in line of what most people would be installing. Every doesn't have a brand new vehicle and unlimited budget for equipment. You're install is high end. Great job

@cocomaster3755

3 жыл бұрын

So soon?? 😂 OF COURSE

@nobodysfavourite6953

3 жыл бұрын

Can't wait!

@pgboyinthehouse9041

3 жыл бұрын

@@darrianbenjamin7292 100% agree. I get tired of reading comments about they should of used this brand of amp. Or that brand of speaker. Not everyone has a sky's the limit budget. They just want some better than factory sound in their daily driver. Hell most of my gear, is stuff I've collected over the years. Some really good upper end stuff. Some middle of the road stuff. All that matters is that I'm happy with it. Lorenzo did a great install with his customers budget in mind. I'm pretty sure the customer will be happy when he hears it.

I have to say I am impressed with your attention to details from the use of nut certs in the plastic panel to counter sinking the mounting holds for a flush fit and laying out the wiring in a very clean organized way. From one professional to another. I would be proud to have you in my shop. Top notch.

I loved doing installs like this as a hobby in my own cars, in the cars of my friends and for some of my relatives. The passion started in high school and continued on well past post-graduate educational training. I’m well into my 40’s now with my own children and hope to teach them things like this. As you can very well see, doing something like this takes patience and planning and foresight. Of course you can just plug everything in then just let the components float around in your trunk & under your seats, but part of my own satisfaction was routing the wires, cutting them to the exact lengths needed, crimping or soldering the cable ends on then securing & protecting the ends with shrink wrap. Man, as many have already stated, this is a very clean install and watching your painstaking attention to detail was more than satisfying. It was downright therapeutic! Keep up your awesome “functional artwork”. Regardless of how old or beaten-up any car may be, it can always benefit from an upgraded audio system. Thank you so much for your video(s)!

@Crispy77760

2 жыл бұрын

i too like this but i move stuff around a lot so i tend to have extra wire as to move things without disconnecting i just added connector to my wires that should make things easier

@jaybrock1861

Жыл бұрын

I am like you in my 40's and I started in high school i have 2 kids 22 and 16. I did not realize kids were still in too putting systems in cars till i saw my son watching a youtube video when he was about 14. I asked him you like that he said "i cant wait till I get my car and put a system in it. So I gave him my old car and we started working on a system in his when he 15. On his 16 bday took him to get his DL and let him drive on to school. I will always remember him pulling out the driveway that day and turning up the music headed to school.

That speaker wire trick with the drill was slick

Shout out to car audio installers, they really gotta love what they do because that work can be painstaking and back breaking

@MadClowdz

2 жыл бұрын

And those of us who watch these for guidance cuz we can't afford to pay someone else and do these things for the first time on a gravel driveway with no garage, no nice table saws, routers, etc...in July...in Florida...nevermind, we're just crazy...

@idk420blazeit

2 жыл бұрын

@@MadClowdz basically in the same boat as you... I just did it in January/February in Tennessee... Was freezing and raining-- i was just out there by myself wiring everything up 🥶

@MadClowdz

2 жыл бұрын

@@idk420blazeit it is rewarding to do it myself and appreciate a job well done. Also good learning experience as I troubleshoot and fix things like for instance the Kicker KEY2004 I installed behind the dash didn't have enough slack on the harness so it was pulling the speaker wire pins back in the harness connected to the amp and losing signal. I got a length of speedwire and added 10 inches and soldered it all together with shrink tube...no issues since. Plus I soundproofed all 4 doors and wow those kicker KSS 6.5 components really shine now. Can't wait to add the HS10 😁

@idk420blazeit

2 жыл бұрын

@@MadClowdz took the words out my mouth... Felt like such an accomplishment that i sat in my truck for like an hour just playing music 😎...

@jdubb21autoworks21

2 жыл бұрын

I do it personally and it’s fun, I’ve been doing it for years

I'm ready for part 3 bro I love watching installation well done

Fantastic video! Excellent design. Excellent tools. Excellent techniques. I can tell this is years of experience being put into practice. I especially like the ABS amp mounting plate idea. Well done!

@Qualitymobilevideo

3 жыл бұрын

Glad you enjoyed it!

That's some eerily hypnotic background music, man. Thumbs up on the video.

@Qualitymobilevideo

3 жыл бұрын

Glad you liked it!

This probably the only video I found that actually shows you the whole process step by step ! Thank you!

@todizzle666

Жыл бұрын

If you need this to hook up your system you should not be doing it at all. I feel like you need at friend or something to help you because there is a lot more to it then whats going on here and certain things do t need to be done unless you have an amplified system in your stock vehicle

@MrHIPNOE

Жыл бұрын

@@todizzle666 lmao

Bro the way you twisted wit drill genius

You know he loves his work with all the detail he does great job!

@Qualitymobilevideo

3 жыл бұрын

No doubt!

Great install. I see a lot of ppl are salty about the gear that was put in but regardless all equipment deserved a quality install. This is surely a huge improvement than before in everyway.

@jrockaz548

3 жыл бұрын

It's all about budget and expectations ppl are dumb not everyone has 3k to drop on a system

@Titans2138

3 жыл бұрын

@@jrockaz548 I hear you but I think people expect amps to do their rated power. Blaupunkt is almost as bad as BOSS in that area. I don't think anyone should hand over their money to a company who lies and counts on the consumer being uniformed. I'm sure they used CCA wire too. I feel like CCA wire is dishonest. I think most people who have CCA wire in there car just aren't educated about the subject.

@JimmyTheProstitute

2 жыл бұрын

@@Titans2138 CCA wire isn't bad depending on your application. If your wire can handle the amperage you are sending to it then it's not a big deal. If you are trying ti maximize your peer based in the gauge wite you are using then OFC is your best bet. But I think CCA is something like 70-80% efficieny of OFC. So if you have oversized 1/0 CCA for a monoblock 4 gaguge input amp and you have calculated your required amps you will be fine.

Your work is beautiful man. Awesome job.

this install is amazing. and i want to install two amps in my vehicle, now i have to study this video so i can assure a clean , organized install.

now that is a clean install.

Very well thought out and clean work . now I want to go rip out all the wiring in my car

@jesonkuttan

3 жыл бұрын

🤣

I’ll take a great install any day.. because you can always buy great gear but great install is hard to come by.

@Qualitymobilevideo

6 ай бұрын

😎👌

Damn, looking super nice.

I like that you guys use ferrules, very, very, nice quality work fella's!!!!

@Qualitymobilevideo

3 жыл бұрын

Thank you very much!

Clean work 💪

Very good and clean job Will done man . Wish to learn more from your videos 👍

@Qualitymobilevideo

2 жыл бұрын

👌

Brother your work is just awesome!

@Qualitymobilevideo

3 жыл бұрын

Thank you so much 😀

Was up guys.....good to see an install video. Lorenzo good job. Now have the Italian do it too.

@Qualitymobilevideo

3 жыл бұрын

LOL I gotta hold the camera!

Motivation. Clean work 💪🏽

@Qualitymobilevideo

2 жыл бұрын

Always!

This guy is a true professional.. I would love to hire him!!

@Qualitymobilevideo

2 жыл бұрын

Thank you!

Great job bro! Props!

Clean install!!

@Qualitymobilevideo

3 жыл бұрын

Thanks guys!

Amazing work. Thanks.

@Qualitymobilevideo

3 жыл бұрын

Thank you too!

Nice work

Awesome video & clean install (I LIKE)

@Qualitymobilevideo

8 ай бұрын

Thanks! 👍

Clean install, now the system is worth more than the rig lol!

What type of wire did you use in the 9 conductor, love the twist in them to help keep them tight.

I might have missed it, but did you have 2 fuses? 1 close the battery in addition to the one right before the distribution block?

Really good fit for 🚗 🚘

Awesome install. Quick question did you bolt the ground wire to the floor using a rivnut insert ?

Shout out to the camera man for getting them clean shots. Great install 👌.

@Qualitymobilevideo

3 жыл бұрын

Thanks bud 👌

@randyanderson4360

3 жыл бұрын

Yea give your camera man the day off cause I know his upper body was tired

nice and clean work

@Qualitymobilevideo

3 жыл бұрын

Thanks 👍

great used for the tools you showed... rivnut tool it's great size and handling's

SUPER CLEAN

@Qualitymobilevideo

2 жыл бұрын

👌

Nice vid!

Outstanding work and video. Wish you were in the U.K.

Very very nice work sir.

@Qualitymobilevideo

3 жыл бұрын

Thank you!

Super nice

I have that 4-channel amp and had some issues with it going into protect mode, but I was also running it bridged. Regardless, I mounted an 80mm pc fan w/ relay inside the chassis, and it hasn't gone into protect mode ever since.

Nice job

awesome work i like that good work 2 thumps up like it

@Qualitymobilevideo

Жыл бұрын

Big thanks

I wonder how many times that he cussed out those little screws 😂

That power distribution block has more technology built into it then the whole truck itself....good job on the install as always.

@Qualitymobilevideo

3 жыл бұрын

😂😂

@damienfrizzell9394

9 ай бұрын

wtf

i really enjoy this, and i myself does it but my problem is i have to order almost everything now i know you probably order as well but the smallest of thing you can run to the hardware store not me that easy. Small island boy and we are limited to good stuff .Love your installs

@Qualitymobilevideo

2 жыл бұрын

Thank you!

Wow that's 🆒 I do installations too in my country but not as clean job as yours access to good quality wires and tools is hard wish i can visit your country and work shop and see how you do it.

Them Blaupunkt amps look pretty sweet! Didn't think they were still around.

@MotoAtheist

3 жыл бұрын

They are low end base model stuff these days.

@robertehlers4330

3 ай бұрын

Yea rock bottom amazon be selling for 40 to 60

Buen Trabajo 😎👍💯🔥🔥🔥

@Qualitymobilevideo

2 жыл бұрын

Gracias!

Install cost more than the amps, lol. I'm glad to see a quality install just wish it was with quality amps.

How did you go about hooking up the remote wire or wires

Hi Lorenzo great To watch. Very Clean and tidy. Have question. Not Started yet but got most of what I need. X-type jag screen head unit. Very Silly Question. 4 speaker's to head unit (8) cut connect wires to Amp. Other 8 to RGB converter from head unit. If I still wanted to use head unit as normal can you get a 3 way splitter to cross wires back to Standard. I know you're thinking why would you do that. I want to be able to use both. Only using the Amp as & when. But also using Car Standard too. I think I've worked it out. I wondered if they was a unit that can do this? I found a 4 way shut off. Yes means clicking 4 switches to turn them off. But not Cross over on to Standard or back to Amp. Also adding a on/off to Remote wire. This would shut Amp off but be nothing sound wise. The unit with 4 on/off on it looks pretty easy to modify to 3 way to cross over. Is they a unit Out there without getting messy. Hopefully you understand. I'm no Expert but can do most things. Hope you can help. 👍

You only need RCAs connected if you have a after market radio and you want to control it from there other then that your already pulling signal from the speed wire connecting to the front

What lines did you tap into ? Did you unplug anything

I have these amp they are so wonderful I had high end amps now sounds as clear as this

@johnathanlyles6073

2 жыл бұрын

I was looking for this comment! I'm looking at them myself. Just a decent budget build for a everyday driver! So I'm pulling the trigger on the pair!

@angelaarredondo7987

2 жыл бұрын

Which is the positive black or blue

@robertehlers4330

3 ай бұрын

Blue lol 😆 anyway I thought for how cheap they are those amps would be trash what do you think?

Which brand of multiconductor 4 channel speaker wire are you using?

Can you provide a link to the cable ties you use with the screw mounting holes? Ones yo used at about 21:10. thank you! and great attention to detail! my OCD thanks you!

Quick question. Let's say I already have my two amps wired to the main battery thru a Distribution block. If I add a second battery could I just run that battery to the main battery. Will it still supply extra power and work correctly.

how can amp burn without burning battery line fuse (60amp) and amp fuses (30amps x 2 fuses). i thought fuses would burn before the amp does! but my amp burnt :(, isit because my fuses have higher amps than the amplifier can handle

I started to think about upgrading the sound system after watching your video, great content, well organized and so tidy, BTW, what is the device shown at 26:44?

@tamareharrison1164

Жыл бұрын

I wanted to know the same. I just use a battery when testing

I've had no luck trying to find that stinger shrink wrap.

I would have soldered the wiring to the boxe terminals ive had bad luck with those coming off

NICE!!!!!!!!

@Qualitymobilevideo

2 жыл бұрын

Thanks!!👌

Hi, what's the purpose of taping the entire two rca Jack's? Curious to know and learn

Is it good to zip ties speaker wire and power wire?

Just got the 1600 4 channel finna run them on 8 ds18 gm6 at 8 ohm

Was that a VCR mounted under the seat before??

where did you get the purple wire for the speakers

Great vi. What is the Lo-Fi track at 12:55? Thanks!

So if i have two amps, i have one mono for my subs an a 4chan for my mods an highs… would i need a deck with 6 rca preouts?? Cuz i messed up bought one that only has four… or am i ok

Quick question old mercedes got two agm batteries stock one bigger one and one small aux one i am gping to run 3 amps totaling 1400rms is that enough or what should i do should i add another bat. Cant afford high output alternator. Its not dimming or giving me problems at all with two amps 1000rms so another 400 rms think i be okay?

so on a 2003 Tahoe where would you tap the 9 wire conductor

Wow nice,, What is the name of that material that you use to seat the amplifier, is it acrylic?

@Qualitymobilevideo

Жыл бұрын

ABS plastic sheet: www.qualitymobilevideo.com/catalogsearch/result/?q=abs%20plastic%20sheet

Great video!! Makes me wanna redo my whole setup

@Qualitymobilevideo

2 жыл бұрын

Go for it!

Wait how did u wire those speakers , I have those and they don't sound that good

Any chance you have a more detailed video on bypassing the factory amp?

@Qualitymobilevideo

6 ай бұрын

We have at least two on the channel!

Hi guys! Not sure I picked up how were the remote turn on wires connected? Were they just daisy chained or connected together? Where did you take the source turn on signal from?

@Qualitymobilevideo

2 жыл бұрын

Yes, they were daisy chained from the aftermarket headunit.

Can you ground to the same spot for 2 amps?

U remind me of mean good job clean and neat

Have a question installing two kicker l3 and two alpine amp . I wired the speakers down to 2 ohms they two dual voice coils . Now my question is should I wire capacitors with the system have been watching you and I think I can get a good answer from you since no one else could answer the question

@Qualitymobilevideo

Жыл бұрын

You are better off running larger gauge wire than a cap.

Why you use mono? If you have some speakers running in stereo system?

I have 2000 Chevy Tahoe I want to know do I have to bypass factory amp.?

Quick question thos old mercedes 04 driving me nuts new xtr9n head unot keeps rebooting what could it be?

what was the sack in the glove box?

Great work! Not trying to be negative at all but blaupunkt? With those subs and the install I figured a better amp would used.

@Qualitymobilevideo

2 жыл бұрын

Thanks! Not our system, it's what the customer could afford. The video is more about how to install two amps, not about having the most baller amps

Super fucking professional.. Great job

Doing gods work Lorenzo! That install was a hot mess

@Qualitymobilevideo

3 жыл бұрын

LOL Appreciate it!

@russlora

3 жыл бұрын

His install is better but not up to what im usto doing ..Someone brought me those Rca's or that wire to use ...I would have to get them to go get some better stuff ,,No freaking way I would use those crap amps .I guess im just usto a whole other level

@russlora

3 жыл бұрын

@Hello There I install for nashville music executives, and country music artists. I know they have much more funds then were seeing here but if your gonna redo a crap install at least use good stuff .The stuff being used here is things you would find in a cheap install kit man .yea I do the speed typing method. Those amps in like the 80' 90' s were pretty good but now there just terrible quality

@robertehlers4330

3 ай бұрын

​@russlora the wires ain't that bad bro those amps on the other hand trash truck never say what the true rms is. For what he had perfect install I am sure he could have used mdf or fiberglass and made plexi windows ne9n and all but fast clean install

Love ur work u need to move to London mate 😂💯👍🏾

@Qualitymobilevideo

2 жыл бұрын

😂cheers

I think that the battery is dying on your music player 😜😂

That was uncalled for homeboy

Where are you located i need my stereo installed correctly

What tool are you using for test polarity at 26:31 ?

@robertehlers4330

3 ай бұрын

Right what is that l?

Do you just tap in the speed wire to the amp

It looks like to twisted that 18 awg wire abit too much... Would it not have been easier to wire the amp rack out of the car and then just run the wiring forward?

@robertehlers4330

3 ай бұрын

No he is perfect period 👌 how you gonna say one word but amazing install 👏 you a jit

You’re out there doing some damn fine work. Hope you got paid big for this one, cause I know that took some time…

@Qualitymobilevideo

2 жыл бұрын

We don't do installations but we want everyone to learn and love Car Audio! 👌😎

@robertehlers4330

3 ай бұрын

​@@Qualitymobilevideoa+

No Five Star Car Stereo install, but pretty decent. Some good professionalism in this install

@edwardautrey3671

3 жыл бұрын

Dean is the man , but don’t think that comes cheap

@domls1317

3 жыл бұрын

@@edwardautrey3671 for professional and clean installs nobody beats Mark from Car Audio Fabrication.

Such a good job for bs apms like that 👏