Installing the Wilwood Brake kit on the 1957 Chevy Bel Air
Roy Marko gets the 1957 Chevy Bel Air Wilwood Disc brake kit installed, and shows a detailed step by step way to install them and the challenges he faced with them, and his solutions. Also bloopers at the end. As always, like, comment and let me know what you think. Remember community not competition. #chevy #1957chevybelair #wilwoodbrakes #wilwood #discbrake
Follow these fine channels:
@soberingrestorationservices @CoastalAutoReactionCAR @MyLegacyGarage @OldeCarrGuy @Str8sixfan @RobertsGarage @weirdbeard8898 @MortskeRepair @moreschmoo @OutlawEdge @SpyderGarage@MontanaGarage @EfurdGarage @CousinCleatus @LeftForDeadGarage @MagnaMachineWorks @KatarinasGarage
Disclaimer: Some of the links below may be affiliate links, if you do use and purchase through them I might earn a small commission which helps support this channel and its growth. Thank you for your support!
Support the channel with Tee-shirts: teespring.com/...
Selfie stick for my iPhone: amzn.to/2WVWEmW
KZread Camera I used: amzn.to/3jDelAz
I use this tripod: amzn.to/3bzU6ig
Taylor Spark Plug wires: amzn.to/38UVf59
Holley 670: amzn.to/3lsaGH7
Energy Suspension Engine Mounts: amzn.to/3qVqCmp
GM ACDelco HEI Ingnition: amzn.to/3eZT3NL
Vortec Aluminum Valve Covers: amzn.to/3qYqF0D
Tri 5 conversion Engine Mount Kit: amzn.to/2P7dYmQ
SBC Starter: amzn.to/3lxrVa6 or amzn.to/3vHlPs2
Wilwood Brake Kit amzn.to/34C7RLM
Wilwood Caliper amzn.to/3g3LSmw
Edelbrock Endura 16" Straight #3 to Straight #3 amzn.to/3g7JVWi
Wilwood Brake Pads amzn.to/3pb7rpe
Wheel Studs: amzn.to/3fGL7k6
Facebook Page: / roymarkosgarage
Website Blog: www.thingsabou...
Chevy Bel AIr Playlist: • 1957 Chevy Bel Air
Пікірлер: 65
Handy dandy camera work Rebecca! Pretty yummy brake kit too. I'ma own something that nice someday. 🤣
@RoyMarkosGarageRMG
3 жыл бұрын
We all strive to own something like that. Rebecca says thanks.
Fun fun!
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you Thank you!
Nice work Roy ! I always give the inner race a twist after the first go and palm them again.
@RoyMarkosGarageRMG
3 жыл бұрын
That's a good point, thanks for the suggestion
Man what a great video. Did my 55 Chevy and was questioning how I done it until I saw this! Thanks a ton for sharing.
That's a great looking kit Roy. Nice job on the install
@RoyMarkosGarageRMG
3 жыл бұрын
Thanks Lloyd appreciate you taking the time to watch and comment.
A great demonstration video and I loved watching it!
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you glad you enjoyed it, tried to make it informative
Those are big time super nice
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you.
Nice work Roy I'm going to look to see if maybe they have a kit like this for a Mustang
@RoyMarkosGarageRMG
3 жыл бұрын
Yes my friend bought a similar kit for a '65
Great job on packing the wheel bearings. That’s the same way I was taught.
@RoyMarkosGarageRMG
3 жыл бұрын
I think it's the best way to do it
Awesome work Roy. Thanks for sharing the many tips, information (and challenges you faced) which you give, adds a lot to the video.
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you very much I like to bring to light the steps needed to put a kit like that in
Lookin Good! 👍
@RoyMarkosGarageRMG
3 жыл бұрын
thank you.
Happy (belated) Birthday, Roy. I think I was over by your place the day of, I meant to call, but my cell was dead. Hope we can talk soon, say hi to the fam for me.
@RoyMarkosGarageRMG
3 жыл бұрын
Cool, we will have to watch up sometime.
Qwik tip use a zip lock bag. Put glob of grease in it and toss bearing in and work grease into sides keeping yoy clean
@RoyMarkosGarageRMG
Жыл бұрын
Yes it does too. I still like that feel of making sure it’s getting in. But what you’re suggesting works good too
Great attention to detail. Enjoyed this a lot.
@RoyMarkosGarageRMG
3 жыл бұрын
Thanks very much Louis
Super informative and great camera angles! With you now and bell is on - great video✊🏼🏁
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you I'm trying to make it informative, and welcome.
Good tutorial and nice mod on the wheel studs.
@RoyMarkosGarageRMG
3 жыл бұрын
Thanks Duane.
Hey, thanks for the sub! right back at ya man.
@RoyMarkosGarageRMG
3 жыл бұрын
hope to have more up soon for you to watch. thanks for joining in the fun.
Need to wash some of my projects. They are looking rough! Cool video, Roy.
@RoyMarkosGarageRMG
3 жыл бұрын
Thanks, hopefully some washing will happen on your end and the projects will look like new.
Awesome setup!!! Nice work!!!
@RoyMarkosGarageRMG
3 жыл бұрын
Thank you.
I thoroughly enjoyed this video! What a nice kit! It should stop way better than the stock drums now!
@MagnaMachineWorks
3 жыл бұрын
PS, loved the out takes!
@RoyMarkosGarageRMG
3 жыл бұрын
Thanks, I still like drum brakes though. Thanks the outtakes comment
Great Video, Thank you!
@RoyMarkosGarageRMG
2 жыл бұрын
you're welcome.
Great work here man. I like how you pack the wheel bearings- I was taught that way too.
@RoyMarkosGarageRMG
2 жыл бұрын
Thanks for watching, a lot of people seem to have been taught that way (or somewhat close)
@gertraba4484
Жыл бұрын
I use zip lock bags for grease and pop bearing in
This is all very interesting. You do a great job explaining it in step-by-step fashion! 👏👏👏👏👏 A great tutorial video! Ruthie B. Howard June 14, 2021 BIG BELLY REBUILDS and TRUCKING
@RoyMarkosGarageRMG
3 жыл бұрын
thank you for the kind comment. I’m hoping to put up more videos like this.
@gertraba4484
Жыл бұрын
U go dual master cyl
Something you dont see alot. People packing grease. Wilwood always look good
@RoyMarkosGarageRMG
3 жыл бұрын
Yes, wilwood does make nice stuff, and yes you don't see people packing grease.
Old girl is gonna stop good now!
@RoyMarkosGarageRMG
3 жыл бұрын
Yes she will.
Great content subscribed ASAP # 🚗 🚘
@RoyMarkosGarageRMG
3 жыл бұрын
thanks. looking forward to yours as well.
Nice work. I like the lug nut conversion. So you said the brake line was 60 inches? I think you mean 60 mm. I have packed bearings like that before, the only way to go. Other brake conversions I've seen for tri fives put the wheel further out from center, this looks like it doesn't or not as much.
Don't quite understand why the rotors didn't come with the studs in the right location. It is the same for 14 and 15 inch wheels. Why didn't you take off the control arms and do the bushings at the same time. Does this kit extend out the wheels by an inch or two or does it leave it in the original position? That is how I was taught to pack wheels bearings. Why use a tool, this is easy and works good. Thanks
Does this Wilwood kit work with the original stock wheels and tire sizes?
fyi this kit isnt made for a sway bar---the calipers have to go in rear of spindles for sway bar--- i made it happen thou
@RoyMarkosGarageRMG
2 жыл бұрын
Good to know, because the customer would like to put a sway bar in, and I think you could flip them with a bit of work.
You won’t be able to use a front sway bar if the calipers are mounted towards the front.
@RoyMarkosGarageRMG
2 жыл бұрын
With this customer provided kit, it mounts the callipers forward, personally it was not first choice as the way the kit is made it, the callipers will hit the steering knuckle.
Roy one question are u out in California LA area😂
@RoyMarkosGarageRMG
Жыл бұрын
no, Edmonton Alberta.
Roy how is that C-50 doing?
@RoyMarkosGarageRMG
3 жыл бұрын
Good, I'll have a U-joint video up soon.