Thanks Ken for the content

@TheShopMiniRC

3 ай бұрын

Thank for you watching!!

Fun seeing that motor upgrade still having stock noodle links, servos, and shocks 😅👍

@TheShopMiniRC

10 ай бұрын

I mean, the other stuff will get upgraded at some point. Lmao. We use this rig as a demo in the Furitek Booth at the events so we can show the motor and esc on a stock truck. It really helps showcase the product.

@StinkyColas

10 ай бұрын

@@TheShopMiniRC Nice it's like the Furitek pace car 🚗🚨 very cool

Outstanding video! I appreciate the step-by-step while explaining the dos and donts.

@TheShopMiniRC

6 ай бұрын

Glad it was helpful!

The pipeline is the perfect test obstacle for the AX-24😝! Keep it up brother

@TheShopMiniRC

10 ай бұрын

Thanks good sir!

Ahhh great install video for this!!! Thanks dude!!!

@TheShopMiniRC

10 ай бұрын

Thanks a ton for watching! Be sure to share!

Great video! Thanks for the detailed info.

@TheShopMiniRC

5 ай бұрын

Glad it was helpful! Thanks for watching.

This channel has been a blessing and a curse. My highly anticipated deadbolt should arrive tomorrow and this perfect build video has made me surpass the original cost of the stock unit. Thanks bud. I now have brand new stock parts for sale if anyone is interested 😝

@TheShopMiniRC

9 ай бұрын

Ahahhha. Sorry!! At some point, you just start building them from scratch.

@zeroshelfqueens

9 ай бұрын

just a few minutes ago, I had that exact thought!@@TheShopMiniRC

Nice... beautiful system.... now get the Spektrum SLR 300 reciever and get rid of that ESC... the reciever will bind with the stock radio

@TheShopMiniRC

10 ай бұрын

Thanks for the tip!

thank you so much for the clear installation video and it was what drove me to get the upgrade for my ax24!! also out of curiosity, my ax24 is running overdrive gears up front, and just wanted to know if it's suitable for the brushless configuration?? my assumption is that it should be fine? again big love to your videos as always!! :)

@TheShopMiniRC

8 ай бұрын

Huge thanks for the watch! The overdrive gears will be fine. ;)

Go Anywhere, Go Axial !!!

@TheShopMiniRC

7 ай бұрын

We love our axials for sure!!!

Did you move the Spektrum esc toward the rear a bit? My body will not fit on like it’s supposed to because lizard pro is too tall so body moves forward 1/4 inch

@TheShopMiniRC

21 күн бұрын

I didn’t. But it’s just double sided tape and should be fairly easy to make space.

So reviews keep saying the motor rubs on the drive line. I'm on the fence...stick to the purple injora motor and get the furitek esc or get the stinger combo and let it rub.

@TheShopMiniRC

7 ай бұрын

If you are completely slamming it to the ground, the motor might rub on the drive shaft some, but a “normal”, “well designed” suspension will be totally fine. Even if it does rub a tad under full compression, it isn’t a big deal. It’s the people who are removing springs and completely slamming it that are having issues (and imo, those are not good suspension setups)

@watsonira7

7 ай бұрын

@@TheShopMiniRC Good to know. Mine is lower but not by much. Like you say if it is not going to hurt anything I'd rather go brushless in the long run. Happy holidays. Cheers.

@watsonira7

6 ай бұрын

I have a question for you. Furitek says the stinger only fits the stock transmission. I'd like to get something stronger than stock, any ideas?

@TheShopMiniRC

6 ай бұрын

@@watsonira7 it will fit any “stock spec” transmission. So, the furitek stellar should work fine. There are many metal transmissions out there that are basically a copy of the stock (but metal). I think their biggest worry is just clearance.

Is drive shaft rubbing on motor?

@TheShopMiniRC

11 ай бұрын

Just barely and only when it’s completely compressed straight down. It’s really a non issue.

I can I've always heard everybody say never plugged directly in and out of the ESC because you can break those you know ears off the female plug have you had that happen

@TheShopMiniRC

10 ай бұрын

Yeah, the furitek plugs are definitely right and using an extension helps.

Question on ESC hook up to receiver, on my new box stock receiver the rear servo is plugged into the THR slot, BR is occupied and CH3 is empty, do you have a tip what to do?

@TheShopMiniRC

2 ай бұрын

Your rear servo is in the THR? And it works? It should be front servo in channel 1, esc in channel 2 (thr) and rear servo in Channel 3.

@ReiG3

2 ай бұрын

@@TheShopMiniRC thanks for the reply. Never used it, read about the brushless update and during install that's when I found it. thanks again!

what is the difference in the micro komodo & the mini komodo an the uses the mini komodo advantages over the micro? thanks

@gibsonlife573

10 ай бұрын

I know for sure one of them's only 2000kv and the other is 3450 KB the micro Komodo is the 3450 also it has a smaller can a little bit longer but smaller not at all profile

@frankiemabry1726

10 ай бұрын

I know that part

@TheShopMiniRC

10 ай бұрын

Micro is a smaller form factor and good with a bit more wheel speed. The mini has a larger stator and has more lower end torque and smoother foc transition.

Hi mate what's the name of the battery extension lead ? I just received my cayman pro but my battery's won't fit into the esc box 😢 already fried a battery trying to connect it 🙃

@TheShopMiniRC

10 ай бұрын

The plug is a 2-pin jst ph plug. Furitek usa has a few different options for extensions / adapters. www.furitekusa.com/pages/search-results-page?page=4

@TheShopMiniRC

10 ай бұрын

www.furitekusa.com/products/furitek-plug-play-micro-power-switch-for-lizard-tegu-stock-scx24-esc

@showusyaguppysaustralia1515

10 ай бұрын

@@TheShopMiniRC thankyou 😆

Installed the Furitek in my AX24. The driveshaft hits the motor when the front suspension compresses. Is there a fix?

@TheShopMiniRC

5 ай бұрын

Less suspension travel or try to shim the trans higher (but then the motor will likely hit on the chassis.)

Will upgrades for the ax24 fit the AX24 XC-1 1:24 4WD 4WS RTR

@TheShopMiniRC

5 ай бұрын

Yes, thats what is showed in this video.

Where do I get the terrain?

@TheShopMiniRC

11 ай бұрын

kzread.info/dash/bejne/p3amsduYnriXaLQ.html

@TheShopMiniRC

11 ай бұрын

Be sure to use the code “TheShop” for a little extra savings.

are those spurs plastic? that for whatever reason for me is worrisome.

@TheShopMiniRC

10 ай бұрын

They are but I they are pretty damn durable. You can always order the stellar transmission with all metal gears.

@Sidewalkchalk27

6 ай бұрын

@@TheShopMiniRC Which transmission exactly? Been running into conflicting information.

@TheShopMiniRC

6 ай бұрын

@@Sidewalkchalk27 stellar transmission for the scx24 has all metal gears.

I must be a moron, but the way mine came, the rear servo is plugged into THR. So, where do I plug the Lizard into? I’m so confused with no instruction on the plugs…

@TheShopMiniRC

4 ай бұрын

Which electronics are you trying to use? (Which scx24?). If your esc is blue, it will not let you use an external esc.

@seanmichael8202

4 ай бұрын

@@TheShopMiniRC Well, to be honest, I finally got it to work but ran into further issues after dickin’ with the calibration in the Furitek app. So, I’m running the lizard pro with a micro-Komodo. It bypasses the stock Spektrum receiver (SPMXSE2425RX) that comes with the AX24. I just had the plug backwards from the Lizard to the Spektrum THR. So, my initial issue was solved simply due to it being plugged in wrong. Now, the receiver isn’t responding to the motor at all. I replaced the old motor, same thing. So I’m just gonna take it to my local shop and have them look at it. Might need a new receiver 🤷🏼‍♂️ I have no idea how it would’ve burnt it out in the first place, which is kind of annoying… But I guess that’s what happens when you have no idea what you’re doing 🤦🏼‍♂️

@TheShopMiniRC

4 ай бұрын

@@seanmichael8202 hopefully you didn’t plug the battery into the motor port on the spectrum.

@seanmichael8202

4 ай бұрын

@@TheShopMiniRC No! Definitely didn’t do that. Is that the only thing that would burn the board out in the Spektrum? Cause I kept thinking maybe during the calibration something overloaded… But then again, I don’t really know. That little song the mini-Komodo sings when you turn on the Lizard stopped singing… Has me worried

@TheShopMiniRC

4 ай бұрын

@@seanmichael8202 make sure your lipo is good and fully charged. Also, plugging in the battery backwards would fry it.

This kit is absolutely unacceptable. A cruel joke. You spend $140 to extend your skid plate even lower and remove clearence and have your motor 100% obstructed by the front driveshaft so you need massive modification or your new motor or driveshaft will destroy one another. I know you see this issue but you just don't care to call out furitek for their absolute bullshit products.

@TheShopMiniRC

6 ай бұрын

What? It doesnt lower your clearance at all.. thats not how lowering the skid works.. it would be exactly the same seeing how that where the links connect. If anything it would raise your COG a tad... but its REQUIRED by ANY outrunner brushless motor... not just the furitek. Find another combo that drops in without any modification and then please let us know so we can show it on the channel. The exact rig in the video was used for thousands of demos at many large events and the driveshaft has a small mark where the motor and shaft rub at full compression.. far from "destroying one another". Pretty sure I mention the rub in the video good sir. ;-) Again, please let us know another combo that works better or easier than this one for the AX24 with little to no modification.

@CharliesCustomCrawlers

6 ай бұрын

​​@@TheShopMiniRC... Are you joking? Doesn't lower the ground clearances? Do you even understand how a skid plate works? The furitek skid is protruding below the frame about 4mm more than the stock skid... That is a direct loss of ground clearance. Where the links are attached has absolutely nothing to do with it. I agree with anon, this kit is a laughably bad "plug and play" upgrade as furitek markets it as. They should absolutely disclose that it requires heavy modifications, because it absolutely does. Maybe you got lucky because mine contacted the drive shaft so bad it would stop the rig in its tracks and cause it to just stutter in place... I had to return it... But I really hope you're joking about the ground clearence issue. you are dead wrong...

@kttz28

21 күн бұрын

Mine is having the driveshaft hit the motor on many obstacles a lot and it shutters until you get to flat ground again.. is there a remedy for this?