IMPORTANT! The installation process requires modification of the drysuit, like cutting the sleeves and cutting the neck opening, By doing so you probably won't be able to get back to the simple seals as before.

You are clearly very skilled, enjoying all of your videos. thanks for sharing this useful information.

Hi , do you think bostik 2402 will work ? Some people in forum saying that contact cement won’t work for neck ring . And seaskin website recommend PVC adhesive

Do you know if the Sitech Quick Cuff and Quick Cuff Oval install into the same diameter sleeve?

Wow incredible job. I wonder if I can do the same to my bare trilam tech dry suit. Has a similar collar.

@DrySuitProjects

3 жыл бұрын

Absolutely. It’s not that different at the end

@RyanB.222

3 жыл бұрын

Dry Suit Projects thank you. I’m going to look into it. I really like my bare trilam tech dry but always nervous of tearing a seal and having to send it in for replacement.

Hi ,.love the videos . The tool you use for sanding is it a drill with a flap wheel sander head ?

@DrySuitProjects

5 жыл бұрын

Yes, exactly

How do i remove the latex seal my suit had before? Just trim it of or do i need to peel it out of the wrist?

@DrySuitProjects

2 жыл бұрын

It usually better to peel it out. Sometimes, if the sleeves are long and the sleeve openings are narrow, then in order to accommodate the PU ring, you you need to cut a bit from the end of sleeve. So in this case it can save you some time of peeling off the latest seals

At the end of the gluing process, do you use the heat gun to activate the glue and roll it again, or just let it dry after rolling?

@DrySuitProjects

6 ай бұрын

This is not the heat activated glue, so no.

Dear Sir May i ask the gule ratio of sc4000 and E-40. Thank's

@DrySuitProjects

3 жыл бұрын

This is from the manufacturer site: Mixing instructions: The SC4000 Cement system is comprised of cement and hardener in the ratio of 660 grams of SC4000 Cement to 30 grams of E40 or ER42 Hardener. These two components must be thoroughly mixed (stirred) for at least 2 minutes. The mixed portion should be used within 2 hours.

What kind of adhesive did you use?

@DrySuitProjects

6 жыл бұрын

Rema SC-4000 Cement kis.rema-tiptop.net/catalog/RTT/DirectSearchArticleDetails.aspx?GLS0=2&PSKey=2_4_2_2_2_5252602&LanguageID=EN E-40 hardener: kis.rema-tiptop.net/catalog/RTT/DirectSearchArticleDetails.aspx?GLS0=2&PSKey=2_4_2_2_2_5251067&LanguageID=EN

where do you get the Aquatape?

@DrySuitProjects

5 жыл бұрын

just google it. you can get it here for exampel: www.seaskin.co.uk/acatalog/25mm-Neoprene-Tape-per-Meter--Spare-Part--AOF10125MM-Accessories.html

What seam tape are you using?

@DrySuitProjects

4 жыл бұрын

I'm using the aquatape. Its a thin neoprene tape, comes different widths. Just google "aquatape" you'll got tons of sites selling it per length

whats the roller you used called?

@DrySuitProjects

3 жыл бұрын

Something like this 40mm High Heat Silicone Roller Resistant Seam Hand Pressure Roller for Roofing Hot Air Heating PVC Welding Installation Flat Tool www.amazon.ca/dp/B07JD8C2C2/ref=cm_sw_r_cp_api_i_HfmeFb02NRSTK

hello wich clue can i try

@DrySuitProjects

9 ай бұрын

SC4000, this is what I’m using