nice 1/10 64, very clean & simple model you have their. stay endured & be safe.

@NorthSideCustomRC

3 жыл бұрын

Thanks 👍

I'm saving my $ for this one. It will be my 1st rc car purchase. Thanks 4 the vid. I hope to use these ideas on my own one day. My wife said I needed a hobby and she thinks I would be good at rc modification.

@NorthSideCustomRC

2 жыл бұрын

got a brushless set up and BEC installed video of them soon, spice up the hydraulic servos lol

@mikeinch3690

2 жыл бұрын

Yea I'm still learning all the lingo. But hey you keep this old man interested I'll be sure 2 check out that vid. I'm subbed to you as well. Hopefully this is my new hobby.

Excellent video. Thanks! I will use your tutorial to install the led kit on Mt 64 Impala this weekend. Subscribed.👍🏻

Thanks... I just picked up the red one for $470.00 at my local hobbytown. I have been looking online and I want to buy these LED light as well thanks for the tutorial brotha!

Awesome video

Thanks dude !!! Removed the jumpers on both(just to make sure), added both y-cables and the lights came on. No reverse though. MS has my left side now so we'll go back after the game and when the left comes back. But THANK YOU for you quick response and walk through !!! Much appreciated !!!

@franklinjosue4919

2 жыл бұрын

I guess Im pretty randomly asking but do anyone know a good place to stream new movies online?

@jaggernolan4310

2 жыл бұрын

@Franklin Josue Flixportal :)

@franklinjosue4919

2 жыл бұрын

@Jagger Nolan thank you, I went there and it seems like they got a lot of movies there =) I really appreciate it !

@jaggernolan4310

2 жыл бұрын

@Franklin Josue Glad I could help xD

Sick. Im still waiting on my lights to come in.

Thats Dope bro, I can do mine now Thanks

I just finished some chrome and the lights this weekend, but I have to redo all the lights because I got a too happy with the hot glue and I was running the back body mount flipped and it won't fit over the lights. I also put the receiver on the wrong side and all my lights are on the wrong side making it difficult to remove the body. I was hoping there would be signal lights too since it had the extra y cable

@NorthSideCustomRC

2 жыл бұрын

If you hook up 2nd y jack into steering channel it will flash blinker to whatever side you steering to

Can these headlights fit on the 59 ?

Nice job do you work other 64 readcats,?

@NorthSideCustomRC

Жыл бұрын

Ive got a Monte build already in the works and gonna snag a 59 this winter if I can pull the funds in, gotta have em all

Why did you not show the placement of your y-cables. Showing where things plug in is much more helpful. Great job. Just trying to figure out where I went wrong and all these videos skip things. Wire harness installation is way more important than gluing lights in.

@NorthSideCustomRC

3 жыл бұрын

Sorry, the diagram they come with gas it but true can be a tad confusing. Plug the esc into the only place it can fit and the male plug kinda with it goes into the receiver. The long male plug on its own goes into the plug on the lights controller port #2 one closest to the middle. Make sure you have plugs all set with correct polarity

@NorthSideCustomRC

3 жыл бұрын

Make sure you do not adjust the Transmitter "throttle curve" that must be default settings.

@derrick2735

3 жыл бұрын

@@NorthSideCustomRC Thank you man !!! I don't know if it's my MS that's got me crazy or what ? Did my sons Revo 3.3 with no issues. I set the car down to come at with a clearer mind. The only place I saw was on the esc at the back on top. Two sets. 3 pronged with 2 jumpers covering each set.

@derrick2735

3 жыл бұрын

@@NorthSideCustomRC Thank you for the speedy response!!! Greatly appreciated !!!

@NorthSideCustomRC

3 жыл бұрын

@@derrick2735 It's harder probably due to dynamic brake lights and reverse lights. Revo more plug n play. And they give an extra splitter for no real reason, only need one.

Installed the Redcat light kit in my 64 last night. Can't seem to get my reverse lights to work when in reverse on the trigger. I have my jumper on the control panel set in K2 at the moment. Any help would be greatly appreciated!

@NorthSideCustomRC

Жыл бұрын

could be the throttle curve, if adjusted throws off the light kit

@biggstan870

Жыл бұрын

@@NorthSideCustomRC Ahh.. Is there a fix for this?

@NorthSideCustomRC

Жыл бұрын

@@biggstan870 in the controller settings reset the throttle curve settings

@biggstan870

Жыл бұрын

@NorthSide Custom RC Gotcha. Thanks Homie!

why people adding all 4 lights in the front, both lights are only on , on a real impala when the high beams are on

@NorthSideCustomRC

3 жыл бұрын

interesting point, not sure how it would look scaled down tho, not everything has to be 100% identical, at least not for me.

Where does the y cable plugs in at receiver and light control unit?

@NorthSideCustomRC

3 жыл бұрын

you have 2 plug ins for the y jacks. You only need one for the reverse/brake light signal (the other is for turn signals but not used with this kit) If you plug it in the wrong one and dont get brake or reverse light, put it in the other plug it should be fine. Other than that the wire harness are plug specific they only fit where they go.

Anybody know where people are getting gold bumpers for these?????

@NorthSideCustomRC

3 жыл бұрын

Pretty sure redcat has the optional part in gold

What channel do u plug the lights into?

@NorthSideCustomRC

2 жыл бұрын

This set up from Redcat you use y jack to link into Chanel 2 this makes lights work with throttle stick for brake lights and reverse lights

nice can you add link to lights

@NorthSideCustomRC

3 жыл бұрын

www.redcatracing.com/products/rer13018?variant=32495511011418