Installing Nascar Inspired Boom Tubes On The New Burnout Truck!! Plus Ron's New Engine Is HERE!
Justin Gets Creative on his S10 burnout truck exhaust!! Grab all your JH Merch from www.cleetusmcfarland.com/coll....
Жүктеу.....
Пікірлер: 225
@97MrFluffy5 ай бұрын
The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
@clittle1559
5 ай бұрын
Def x pipe
@jergunsjunk5 ай бұрын
Should be a pipe between both boom tubes so its balanced, might get a few more ponies too. Might sound like an eight from both sides too.
@mcmillan1963
5 ай бұрын
Agreed on the "H" pipe.
@xjmg007
5 ай бұрын
@noCo970 X pipe has a better high rpm sound vs Hpipe low rpm/idle imo
@misfitwrx
5 ай бұрын
Good call, an x pipe would make a huge difference
@thegrimstreaker4669
5 ай бұрын
Not an H pipe X pipe sounds better and creates better flow.
@madmod
5 ай бұрын
its about exhaust scavenging, not flow@@thegrimstreaker4669
@Rebar77_real5 ай бұрын
Good spot on the back of the cones for a fuel injector, heh heh!
@gafrers5 ай бұрын
Love the placement of the boomtubes exits. Need an X pipe. And maybe a flame thrower system for show.
@MichaelBowen-mk6cg5 ай бұрын
Another good show guys, Justin's one hell of a fabricator I can't wait to see that Square body crew cab long bed back on a channel
@thatfordguy22685 ай бұрын
Builds are coming together. The "Boom Tubes" sound awesome! 🇺🇸💪😎
@michealarburn9861Ай бұрын
Justin... Not Justin Justin but the other Justin puts in so much work to get you guys stuff dialed!! 💪💪💪
@patrickr26865 ай бұрын
All those new HOA neighborhoods are going to love you
@robertbruce18175 ай бұрын
Exhaust exit right in front of rear tyre on burnout cars are prone to tyre fires 🔥 🔥🔥can’t wait light her up
@buckdaily82885 ай бұрын
Very impressed! Very good high-quality work right there buddy.
@Akestler5 ай бұрын
He should put a balance pipe between the pipe
@BenjySparky5 ай бұрын
JH and Justin, y'all rock! Love the boom tubes. Peace
@FORDLYFAOTEAROA5 ай бұрын
What a sweet product Yas done built there 👌 mint to see them in action
@JohnRoberts715 ай бұрын
Great content thanks for sharing
@colemcmeans78095 ай бұрын
thats got some hell yeah brother in it, love it.
@stevenraymer66825 ай бұрын
This is gonna be cool as hell.
@ni_wink845 ай бұрын
Imagine if Justin and Tye got on a project together, thing would be a work of art!
@FastasFox355 ай бұрын
Sounds awesome
@nud32315 ай бұрын
Man this is fucking awesome guys. Homemade boom tubes HELL YEAH!
@stevencherrett-eb6zh5 ай бұрын
Just toss a lower gear in the drop transfer case and you'll be fine sometimes less power is more fun cuz you don't break stuff
@dereklancaster23035 ай бұрын
I love it ! Think it's pretty damn good looking actually
@shawnbailey60845 ай бұрын
I love the s10! Great video guys.
@buckdaily82885 ай бұрын
Bro, I was laughing with you while he was backing out. I love it.😂
@br549rdr5 ай бұрын
Love the content!!
@DJTAZ19965 ай бұрын
Those square body s10s always was a great platform for speed and look great burning out. Sounds mean and makes me love chevy even more
@Laidbackksierra5 ай бұрын
Love the content man keep the videos comin
@savage63945 ай бұрын
Lmao😂😂 “I see he found the Ratchet” had me dying!
@mjmcomputers5 ай бұрын
Boom tubes are perfect.
@scottsigmon9265 ай бұрын
Looks cool
@adamspencer36205 ай бұрын
As always man Love It
@williamcampbell65895 ай бұрын
Sounded better with the straight piped.
@kyleosbun5 ай бұрын
Bold move doing all that in crocs
@seannorris88935 ай бұрын
Damn that’s a gorgeous obs
@ferdis75 ай бұрын
That looks toooo clean, bet the boys are gunna get a kick out of it too lol
@greythompson52865 ай бұрын
Loving the channel Mr. JH
@travisshivers67205 ай бұрын
Need to put a x pipe in it make them higher rpms sound better
@MayWolf8105 ай бұрын
He's going to be able to see a lot better now too, sounds great yeeyee
@bubbamelvin94195 ай бұрын
Thats a great idea. Never thought of that
@covewater5 ай бұрын
GETCHA SOME YEE YEE!!
@bigpaugh5 ай бұрын
JH has the "content" I love ;)
@oshow9115 ай бұрын
The ole composite toe crock is one of my all time favorite shop shoe😂
@AkinsSemiAndMobileServicesLLC5 ай бұрын
Sweet s10
@dylan82855 ай бұрын
Now you just need a fireball tune to go with the boom tubes so its spitting fire like a dragon lol
@BreakerBreaker13204 ай бұрын
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
@bassplyerdaniel5 ай бұрын
I dig that truck alot
@stevencherrett-eb6zh5 ай бұрын
When you were filming the floor there I thought we were laughing at Justin's Crocs
@craigengelman13695 ай бұрын
180 degree headers will make it sound insane!
@ChickenBaconRanch43595 ай бұрын
Put the blower on that motor. Just adjust the pulley size so she don't make too much boost.
@frankensteincreations47405 ай бұрын
👍🤘👏 Love your guys’ humor. Same kinda funny comments I make… 1,000 hp, more like $1,000… lol love it
@theglitch995 ай бұрын
At least they got thier "STEEL TOE CROCKS" on......
@MrTugone695 ай бұрын
When ya boss says pop the tyres, u pop them dam tyres😂
@buckdaily82885 ай бұрын
Brother!!! 454 like a rock 💪🏻 Don’t kill it because it can go in the S-10 next 😂
@statler7245 ай бұрын
Please build the 6.0 for the og mud truck! It’s was it deserves!!
@mcyooper8205 ай бұрын
ya should paint that Hood scoop Shop Green brighten that S10 up,
@duramaxklem14915 ай бұрын
You need a H pipe or X pipe for that to actually sound good.
@vazfx165 ай бұрын
I like this🤜🏾🤜🏾🤜🏾💪🏾
@Lordbaccus4 ай бұрын
That is Freaking Wicked
@chaseb999245 ай бұрын
Can you install a Holley sniper and wire in a nos kit that is controlled by the sniper? That would be cool on the s10
@andrewwillis80845 ай бұрын
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
@corry6855 ай бұрын
Dangit man the blower was bad ass I hope you find a 454 that will handle the blower because you are gonna need it
@stephenhasty70885 ай бұрын
Check the pinion bearing or the carrier bearing in the rear… one of them has moved. The tire to dead stop like that is a sign . Bad ass truck though.
@carlosmmm21835 ай бұрын
Sounds much better now, but it needs a x pipe badly. It'll make it sound even better with it.
@blakefloyd5822
5 ай бұрын
second the x-pipe, or even a double x pipe lol
@boostedperformance45295 ай бұрын
You should put flamethrowers in your exhaust I guess that's like a mix of diesel and gas that shoots flames really far while you're doing your burnout
@duramax.5 ай бұрын
Even pipes and there suppose to have baffles or something inside the boom tubes thats just metal funnels
@jeffmoleskivintageiceracin59355 ай бұрын
Need a “H” or X pipe put in so it doesn’t sound like 2 4 cylinders
@bbagley445 ай бұрын
X pipe and make them shoot flames! Sounds great!
@haydenroyer5 ай бұрын
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up. Or the small block chevy, high revving on NITRO METHANE
@brianl89835 ай бұрын
Good thing Justin had is safety crocs on
@kevincrumm5625 ай бұрын
Haha looks sick
@user-js7mm3bq5l5 ай бұрын
Run a bass piano string back and forth through it and then it will scream.
@kennethcohagen35394 ай бұрын
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
@Tap_rack5.565 ай бұрын
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
@shrapnelsbunker7365 ай бұрын
One rowdy lil S-10....
@seananon48935 ай бұрын
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
@jeremymaag44755 ай бұрын
If that ain't a friend thing to say, "he don't like burning out on those tires so I keep making him do em" I don't know what is. LOL🤣
@mattjones45815 ай бұрын
Burnout kings will ride again
@vontrotski15 ай бұрын
Nice tubes. Could I suggest a balance pipe between the two 2 1/2" pipes?
@skeetermcjustice51305 ай бұрын
Definitely interesting lol
@ImAlive115505 ай бұрын
Reinforce the wheel wells so the bed don't get tore up when the tires explode
@alexduke54025 ай бұрын
Makes me wonder what zoomy style boom tubes would sound like
@justinnykamp5 ай бұрын
So fast it blew the windows out 😂
@hoytkenneth095 ай бұрын
My god Justin clean that floor dude WOW !! Sorry i meant Jason !
@precisiondiesel2255 ай бұрын
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
@kenslade315 ай бұрын
Loud pipe saves life
@jackmagnium61155 ай бұрын
bruh that looks like it should go down a drag strip and do burnouts. just get some turbo chargers that cleetus has leftover and make that a monster
@duramax.5 ай бұрын
Used to have the same thrush mufflers on the same s10 but a 2.6 v6 lmaooo
@Smokey720135 ай бұрын
Keep it cool with water sprayer on the radiator will keep tgat motor cool for ever on the chip
@2023toyotarav4trdoff-road5 ай бұрын
He did all that in Cros 😂
@brysdjclue1005 ай бұрын
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
@BBCMONTE345 ай бұрын
Back the timing down a little bit and spray the house down on that big block. Stock will take 200-250 all day
@toddsupraman76095 ай бұрын
Put an H pipe on the S 10 will run better and it will sound better
@justincredible44685 ай бұрын
Put the X or H pipe in Justin’s S-10 to make it sound better.
@buckdaily82885 ай бұрын
Justin truck is going to be ripping. Everyone else has their hands full.
@nicholasmero7515 ай бұрын
Ya'll should put weight plates in the bed. Pip them tires
@user-gs1do9in7l5 ай бұрын
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
@TazerGames4 ай бұрын
The first time you turned on the engine, it started playing bleed by messugah 😂😂😂
@brandonross32285 ай бұрын
Crocks in the shop 😮🚑
@mattward3305 ай бұрын
Blower on the duramax race truck
@raysloan7925 ай бұрын
You'd hear the ties spinning and don't want that. Cut it off that's rite😂😂
@rifleman73135 ай бұрын
If noise is the ultimate goal I would think that something like a modified conical megaphone would be the loadest. If my reasoning is correct.
Пікірлер: 225
The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
@clittle1559
5 ай бұрын
Def x pipe
Should be a pipe between both boom tubes so its balanced, might get a few more ponies too. Might sound like an eight from both sides too.
@mcmillan1963
5 ай бұрын
Agreed on the "H" pipe.
@xjmg007
5 ай бұрын
@noCo970 X pipe has a better high rpm sound vs Hpipe low rpm/idle imo
@misfitwrx
5 ай бұрын
Good call, an x pipe would make a huge difference
@thegrimstreaker4669
5 ай бұрын
Not an H pipe X pipe sounds better and creates better flow.
@madmod
5 ай бұрын
its about exhaust scavenging, not flow@@thegrimstreaker4669
Good spot on the back of the cones for a fuel injector, heh heh!
Love the placement of the boomtubes exits. Need an X pipe. And maybe a flame thrower system for show.
Another good show guys, Justin's one hell of a fabricator I can't wait to see that Square body crew cab long bed back on a channel
Builds are coming together. The "Boom Tubes" sound awesome! 🇺🇸💪😎
Justin... Not Justin Justin but the other Justin puts in so much work to get you guys stuff dialed!! 💪💪💪
All those new HOA neighborhoods are going to love you
Exhaust exit right in front of rear tyre on burnout cars are prone to tyre fires 🔥 🔥🔥can’t wait light her up
Very impressed! Very good high-quality work right there buddy.
He should put a balance pipe between the pipe
JH and Justin, y'all rock! Love the boom tubes. Peace
What a sweet product Yas done built there 👌 mint to see them in action
Great content thanks for sharing
thats got some hell yeah brother in it, love it.
This is gonna be cool as hell.
Imagine if Justin and Tye got on a project together, thing would be a work of art!
Sounds awesome
Man this is fucking awesome guys. Homemade boom tubes HELL YEAH!
Just toss a lower gear in the drop transfer case and you'll be fine sometimes less power is more fun cuz you don't break stuff
I love it ! Think it's pretty damn good looking actually
I love the s10! Great video guys.
Bro, I was laughing with you while he was backing out. I love it.😂
Love the content!!
Those square body s10s always was a great platform for speed and look great burning out. Sounds mean and makes me love chevy even more
Love the content man keep the videos comin
Lmao😂😂 “I see he found the Ratchet” had me dying!
Boom tubes are perfect.
Looks cool
As always man Love It
Sounded better with the straight piped.
Bold move doing all that in crocs
Damn that’s a gorgeous obs
That looks toooo clean, bet the boys are gunna get a kick out of it too lol
Loving the channel Mr. JH
Need to put a x pipe in it make them higher rpms sound better
He's going to be able to see a lot better now too, sounds great yeeyee
Thats a great idea. Never thought of that
GETCHA SOME YEE YEE!!
JH has the "content" I love ;)
The ole composite toe crock is one of my all time favorite shop shoe😂
Sweet s10
Now you just need a fireball tune to go with the boom tubes so its spitting fire like a dragon lol
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
I dig that truck alot
When you were filming the floor there I thought we were laughing at Justin's Crocs
180 degree headers will make it sound insane!
Put the blower on that motor. Just adjust the pulley size so she don't make too much boost.
👍🤘👏 Love your guys’ humor. Same kinda funny comments I make… 1,000 hp, more like $1,000… lol love it
At least they got thier "STEEL TOE CROCKS" on......
When ya boss says pop the tyres, u pop them dam tyres😂
Brother!!! 454 like a rock 💪🏻 Don’t kill it because it can go in the S-10 next 😂
Please build the 6.0 for the og mud truck! It’s was it deserves!!
ya should paint that Hood scoop Shop Green brighten that S10 up,
You need a H pipe or X pipe for that to actually sound good.
I like this🤜🏾🤜🏾🤜🏾💪🏾
That is Freaking Wicked
Can you install a Holley sniper and wire in a nos kit that is controlled by the sniper? That would be cool on the s10
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
Dangit man the blower was bad ass I hope you find a 454 that will handle the blower because you are gonna need it
Check the pinion bearing or the carrier bearing in the rear… one of them has moved. The tire to dead stop like that is a sign . Bad ass truck though.
Sounds much better now, but it needs a x pipe badly. It'll make it sound even better with it.
@blakefloyd5822
5 ай бұрын
second the x-pipe, or even a double x pipe lol
You should put flamethrowers in your exhaust I guess that's like a mix of diesel and gas that shoots flames really far while you're doing your burnout
Even pipes and there suppose to have baffles or something inside the boom tubes thats just metal funnels
Need a “H” or X pipe put in so it doesn’t sound like 2 4 cylinders
X pipe and make them shoot flames! Sounds great!
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up. Or the small block chevy, high revving on NITRO METHANE
Good thing Justin had is safety crocs on
Haha looks sick
Run a bass piano string back and forth through it and then it will scream.
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
One rowdy lil S-10....
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
If that ain't a friend thing to say, "he don't like burning out on those tires so I keep making him do em" I don't know what is. LOL🤣
Burnout kings will ride again
Nice tubes. Could I suggest a balance pipe between the two 2 1/2" pipes?
Definitely interesting lol
Reinforce the wheel wells so the bed don't get tore up when the tires explode
Makes me wonder what zoomy style boom tubes would sound like
So fast it blew the windows out 😂
My god Justin clean that floor dude WOW !! Sorry i meant Jason !
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
Loud pipe saves life
bruh that looks like it should go down a drag strip and do burnouts. just get some turbo chargers that cleetus has leftover and make that a monster
Used to have the same thrush mufflers on the same s10 but a 2.6 v6 lmaooo
Keep it cool with water sprayer on the radiator will keep tgat motor cool for ever on the chip
He did all that in Cros 😂
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
Back the timing down a little bit and spray the house down on that big block. Stock will take 200-250 all day
Put an H pipe on the S 10 will run better and it will sound better
Put the X or H pipe in Justin’s S-10 to make it sound better.
Justin truck is going to be ripping. Everyone else has their hands full.
Ya'll should put weight plates in the bed. Pip them tires
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
The first time you turned on the engine, it started playing bleed by messugah 😂😂😂
Crocks in the shop 😮🚑
Blower on the duramax race truck
You'd hear the ties spinning and don't want that. Cut it off that's rite😂😂
If noise is the ultimate goal I would think that something like a modified conical megaphone would be the loadest. If my reasoning is correct.