INSTALLING LSD AND ISR DIFF MOUNTS ON MY GENESIS COUPE

Автокөліктер мен көлік құралдары

In this video I installed an limited-slip differential in my Genesis Coupe 2.0. My old mounts were worn and I replaced them with ISR differential mounts. I installed the 4th mount as well.
Mounts are really hard to replace.
The diff is the factory limited-slip and we are replacing my old open-diff.
Thanks for Watching
If you haven't watched my other videos click on my channel or the links below to see them:
ATTEMPTING BURNOUT IN A 2019 DODGE CHARGER
• ATTEMPTING BURNOUT IN ...
Installing Tomei Titanium Cat-back Exhaust on 2018 Subaru WRX
• Installing Tomei Titan...
I BOUGHT HIM A GENESIS COUPE!!!
• I BOUGHT HIM A GENESIS...
I BOUGHT ONE OF THE CHEAPEST BMW 7-SERIES ON THE MARKET!!!
• I BOUGHT ONE OF THE CH...
INSTALLED A EXHAUST ON 2019 Toyota Camry XSE 2.5L
• INSTALLED A EXHAUST ON...
WE TRIED TO DO A BURNOUT ON THE 2019 TOYOTA CAMRY XSE 2.5 FAIL!!
• WE TRIED TO DO A BURNO...
Camry Burnout Blooper Video
• 2019 Toyota Camry 2.5 ...
POWEDER COATING MY GENESIS COUPE BREMBO CALIPERS
• POWEDER COATING MY GEN...
VOLKSWAGEN JETTA SHOOTING FLAMES
• VOLKSWAGEN JETTA SHOOT...
DRIVING FERRARI IN SNOW!!
• DRIVING FERRARI IN SNOW!!
Honda S2000 Revs and Launch!!!
• Honda S2000 Revs and L...
400HP BMW 335i REVS and LAUNCHES!!!!
• 400HP BMW 335i REVS an...
FAIL DRAG RACING IN THE SNOW MANIFOLD ALMOST ON FIRE!!!!
• FAIL DRAG RACING IN TH...
Driving Ferrari 360 Spider LOTS OF REVS
• Driving Ferrari 360 Sp...
How to Change Forge Wastegate Spring for Hyundai Geneis Coupe 2.0
• How to Change Forge Wa...
Replacing the PCV Valve on the Genesis Coupe 2.0T
• Replacing the PCV Valv...
Toronto to Winnipeg And Back Time Lapse
• Toronto to Winnipeg An...
DROVE FROM TORONTO TO WINNIPEG TO PICK UP PARTS
• DROVE FROM TORONTO TO ...
Strada Season Opener Car Meet 2019
• Strada Season Opener C...
Installing Forge BOV Spring On My Genesis Coupe
• Installing Forge BOV S...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 1
• INSTALLING THE CLUTCH ...
INSTALLING THE CLUTCH ON MY GENESIS COUPE Part 2
• INSTALLING THE CLUTCH ...
Corvette REVS and LAUNCHES
• Corvette REVS and LAUN...
HAVING FUN DRIFTING IN THE SNOW!!
• HAVING FUN DRIFTING IN...

Пікірлер: 22

  • @zuhaibhanif7477
    @zuhaibhanif74774 жыл бұрын

    nice!

  • @iNytrix
    @iNytrix3 жыл бұрын

    Within the first 2 minutes I could tell you guys are from the GTA hahaha

  • @dvdfll
    @dvdfll3 жыл бұрын

    Lot of rust under there, but thanks for the video!

  • @Jacob-rt6on
    @Jacob-rt6on Жыл бұрын

    What's the part number for the mount bolts?

  • @krishnapatel2863
    @krishnapatel28632 жыл бұрын

    You guys on the east coast?

  • @envyous6953
    @envyous69534 жыл бұрын

    I heard about harder bushings cracking the subframe?? Idk if this is true or not, I’m trying to find out.

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    I heard that was for the solid metal bushing and they start to crack the subframe. As for these mount they area hardened delrin with aluminum sleeves. Almost a year with them and so far it's good. I took off the 4th mount as it was making too much drivetrain noise.

  • @envyous6953

    @envyous6953

    4 жыл бұрын

    Appreciate they reply, I was actually scared of installing these or selling them & get the ATQ kit. Did you tried anything to reduce the noise?

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    @@envyous6953 still a bit of noise at highway speeds but that could be due to my lsd as I never had that noise til I installed the lsd. But removing the 4th mount reduced the noise by a lot. It could vary based on your setup as well. Due to my diff there was noise. As for these mounts, they are like a stronger rubber than oem. I know there is the solid metal mounts but those will destory the subframe depending on how you drive. Then again it's a try at your own risk type thing.

  • @Meekmillan

    @Meekmillan

    3 жыл бұрын

    @@envyous6953 did you ever end up doing the ATQ kit? I just ordered another OEM bushing to toss in the 4th slot but still may do the ATQ kit down the road because I will be reinforcing the subframe... so it'll either be the ATQ kit for the plate they have or me DIY welding plates on myself lol

  • @Mr3boude
    @Mr3boude4 жыл бұрын

    is it an automatic or manual, i have an open diff 2.0 bk1 5 speed automatic. do you know if i can do such a swap

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    You should be able to do the swap. Only thing is the ratio for the diffs are different between the automatic and manual genesis coupes. Check the genesis coupe forum. There is information about the diffs on it.

  • @bradbird8913

    @bradbird8913

    4 жыл бұрын

    I have the same 5speed auto. Dont car much about the lsd but how are the bushings in terms of improvements?? Also I'm not sure if u may or may not know is there a away to replace the transmission mount on these things( I know manual is everywhere but i dont know if the mount is similar)

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    @@bradbird8913 automatic mount is different then manual transmission. The mounts make the diff really stiff you hear more noise from the drivetrain.

  • @jaymarkdecenabringino3090
    @jaymarkdecenabringino3090 Жыл бұрын

    Will upgrading ur diff make ur car effective on top end when roll racing

  • @AlmightyBk2

    @AlmightyBk2

    Жыл бұрын

    Depends top end wise you want 3.73 or 3.53 gears

  • @halomegablokswarrior8798

    @halomegablokswarrior8798

    11 ай бұрын

    Top end it shouldn’t do anything tbh. The diff upgrade is needed for launches in first

  • @DM-dy4bw
    @DM-dy4bw4 жыл бұрын

    So how much did it cost to get it done, im thinking of getting one for my whip.

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    The lsd is a bit expensive to get. The mounts go for around 150.

  • @DM-dy4bw

    @DM-dy4bw

    4 жыл бұрын

    ​@@JustRandomCars ok so the LSD you got, how would you rate the performance of it, any noticeable difference from stock to performance.

  • @JustRandomCars

    @JustRandomCars

    4 жыл бұрын

    There is a big difference when going around the corner and feels more responsive.

  • @francoisauger3131

    @francoisauger3131

    3 жыл бұрын

    I have a 2013 2.0t and i just bought à lsd diff from à 2013 3.8 is any canadian tire garage can really do that kind of swap ???I find it really cool that the let you film the swap would i be better off just renting à garage lift else-where

Келесі