Those look sweet I was undecided on the mirrors until I seen them on your bike. Definitely going to be the next purchase for the Honda. Thanks for a great video!!

I like that your bike is in your dining room ;) No better place for it.

Thank you so much for uploading this video. Thats what i was looking for long time.

Extremely well edited!

That was really a great assembly video.

Hey Paul, did you choose the “no/top clamp” option and then add your top clamp and display mount a la carte?

Mounting the odometer underneath? Did you have to find nuts and washers or is the mount threaded. Also wondered if you could reverse it and mount the dash with the key switch under and the odometer over to provide a little protection for the key.

Good video! Thank you!

I know it was forever ago, but where did you find the plastic “cup thingies” for the display mounts?

@billsmith4368

4 ай бұрын

There are a couple of options you can do. 1. Use the plastic thingy that the speedometer was previously attached to. It has the bonus of providing a couple of wire guides. 2. You could go to a store like Ace Hardware and get a couple plastic spacers in that section where they sell loose nuts and bolts and other widgets

Hey buddy long time no more traktor videos. And by the way great video!

@LabCoatPaul

6 жыл бұрын

Thanks! Yeah, I haven't used Traktor for a while. I'm focusing more on repair videos these days.

Nice vid! very helpful. I like when you tossed the KTM handguards on the floor ;) LOL -- What exact tool did you use to tap the threads on the end of the bars for the big bolts? I don't own a tool like that and I will need to pick one up to do this job. How did you know exactly what thread pattern to use? thx!

@LabCoatPaul

5 жыл бұрын

It's a 5/8-11 tap. If you buy the Ultimate Hand Guards from Highway Dirt Bikes, they come with the tap. www.highwaydirtbikes.com/index.php?app=ecom&ns=prodshow&ref=HG-500&sid=tdkb197lge409469h65q320ieb7y250t

Nice, great video! Also cool that HDB has it on their site :) BTW, do KTMs come with an unusually long throttle tube??? You sliced the end off and it still looked longer than most stock tubes I've seen!

@LabCoatPaul

5 жыл бұрын

I measured the length from the aluminum throttle housing to the end of the grip and it's 4.75 inches (after I cut it).

@wolfman175

5 жыл бұрын

@@LabCoatPaul Thanks for taking the time to do that and to reply, much appreciated!

Excellent video and your exactly right on the un-cluttering the HDB does for the KTM. I have the same 17' 350 EXC-F. Is there anyway u could share your parts list ?

@LabCoatPaul

6 жыл бұрын

Thanks! Here are the parts: www.highwaydirtbikes.com/index.php?app=ecom&ns=prodshow&ref=HG-500 (select 90 x 38 bolt pattern) www.highwaydirtbikes.com/index.php?app=ecom&ns=prodshow&ref=BM-504 www.highwaydirtbikes.com/index.php?app=ecom&ns=prodshow&ref=TC-300 (select Dash w/KTM Key Switch & 2 PushButton Mts)

@vernspal279

6 жыл бұрын

Excellent - Thanks !

@mrnoodley

5 жыл бұрын

Thanks for the parts list and links. I’m ordering the exact same setup for my 17 250 EXC-F. It looks so much better than stock, can’t wait to get the parts in!

Will the HDB handguards work with a Scotts Dampener?

@LabCoatPaul

3 жыл бұрын

That's a good question for highway dirt bikes. Check out their website here: www.highwaydirtbikes.com/index.php?app=cms&ns=contact

Great but.. what about our scooters?

How about some ktm dirt trail riding videos? I'd love to see some! thanks

@LabCoatPaul

5 жыл бұрын

Hi! I ride some really pretty places here in Utah, but my dirt bike riding skills are not particularly interesting to watch. I go kinda slow and don't do any cool jumps or wheelies.

@motardsquid

5 жыл бұрын

@@LabCoatPaul With your dry humour i think you can make the videos really great. No pressure, but do some!

Not the same orange on the hand guards

Damn I wish everyone edited like you do!

@LabCoatPaul

3 жыл бұрын

Thanks! I try to present the information as quickly as possible with no time wasted.

@herbiesnerd

3 жыл бұрын

Lab Coat Paul by chance did you ever install the Trail Tech Voyager Pro with your Highway Dirtbike cockpit? I’m about the buy one and want this mount.

@LabCoatPaul

3 жыл бұрын

@@herbiesnerd I was happy with the stock KTM display. It have me hours, mph, and an odometer. I installed a trail tech display for a friend and was disappointed when it failed a year later because the wires are way too thin. They broke right next to the where I soldered them. I wish they would use a heavier gauge wire for their displays.

"Fucking useless". Awesome! Thank you. I bought this kit, plus the Scott's dampener mount.

As a heads up if you were unaware there is a channel that has taken your video and re-posted it. kzread.info/dash/bejne/hnukytCGebffosY.html