Excellent video! I do things a little different but we all get the same end result! Usually my cut takes anywhere from 10-45 min all depends on the age of the building, I’ve come to realize the new buildings are a lot more easy when it comes to cutting the studs…. Thank you for taking the time in this video I’m sharing with my apprentice employees!!! 👍🏼
@yourfriendandmyfriend
2 жыл бұрын
Thank you for watching / commenting! I hear you in regards to the age of the building!
@muhdooluhahblungata4912 жыл бұрын
You sir, are a magician. Well done, nice techno beat.
@crzykev113 ай бұрын
It’s been awhile since I cut a strike and I’m fixing to start cutting in 400 strikes, this was a great video reminding me how to do it thanks.
@crzykev11
3 ай бұрын
Wish they wouldn’t have ordered hes1006’s but they did. There are so many strikes that look so much better
@user-lq3ji9kb7z
17 күн бұрын
@@crzykev11 HI, can you mention one that works better than the HES.. I am in the process and doing research.. so many out there..
@pcdoodle13 жыл бұрын
This is how you do a demo video. Great job!
@yourfriendandmyfriend
3 жыл бұрын
I'm glad if you're able to take something away from it!
@pcdoodle1
3 жыл бұрын
We have a space with an entry door that uses one of those 5" square paddles to egress. I think I might be able to use one of these strikes to add keycard access while keeping the functionality of the existing lock. Thanks again for posting this.
@skyandboss Жыл бұрын
Good job
@JoeyM007 Жыл бұрын
Skills 🍻
@drewhaight28092 жыл бұрын
How often do you replace the blades? And what blades do you use?
@brentsido88222 жыл бұрын
I've always used a rotary tool with metal cut off disks, heard of guys using angle grinders, was just talking to a long time friend in the field about using a multi tool, those blades are expensive aren't they, how many strikes can you cut in with one?
@yourfriendandmyfriend
2 жыл бұрын
I would say the cost is comparable to a pack of Dremel Wheels. As long as I'm not trying to cut too fast, apply too much pressure, and as long as I'm using my cutting wax those blades last a long time. I haven't counted but it feels very comparable to the dremel. Also, they're not too expensive.
@lowvoltageghost888
2 жыл бұрын
Other than expensive they are more Safe than Dremel Blades breaking and flying all over the place, I would recommend the Diablo Blades for the multi-tool, they a bit more expensive but I have manager to cut at least 5 Electric Strikes straight with 1 Blade.
@hawaii-state-of-mind Жыл бұрын
I feel you done this many times.
@johnwuethrich4196 Жыл бұрын
Ever done a transfer hinge? I'm struggling with how to get the wire through the door frame
@yourfriendandmyfriend
Жыл бұрын
I have done transfer hinges. Couple different styles. Sometimes the electrician runs conduit for us. Sometimes we have to fish it. If I have to fish, I'm usually in the wall if it's open, or if I can come down the door frame from above the ceiling
@yourfriendandmyfriend
Жыл бұрын
Also, sometimes I've had to use a drill bit 4 ft long to get a hole in the top of the door frame...
@Magicagic89
4 ай бұрын
u have to get a long bit that bends and drill thro the door from the hinge to the lock !!its fun careful to not drill out from the side of the door !!
@amctiledesign4 ай бұрын
Mine stoped working ..can't figure out what's wrong .doesn't stay locked
@yourfriendandmyfriend
4 ай бұрын
It could be one of several things. Check your power supply, check your fuse in your power supply for the lock, it might be the strike/lock itself. They are rated for about 50,000 duty cycles, so if it's a high traffic door, depending on traffic, you might get 5 years out of it...
@prsnt7773 жыл бұрын
You should have demonstrate how it works too fully functional
@yourfriendandmyfriend
3 жыл бұрын
Apologies, I should have but sometimes I do this on the fly and don't plan it out. I will for future videos
@neogeoking Жыл бұрын
Show the cutting video please.
@lowvoltageghost888 Жыл бұрын
I'm planning on doing a video of the same installation process, I made one already cutting and installing a HES Strike 8000c on a woodframe, now I need to do a video on a Metal Frame, great work buddy. kzread.info/dash/bejne/pmin2NZvcqyboto.html
@yourfriendandmyfriend
Жыл бұрын
awesome! send me a link when you're done - I'll check it out!
@tonyunderwood69722 жыл бұрын
I searched for this video for the sole purpose of seeing what tool you use to cut and how you use it and you completely skipped that part. hah
@yourfriendandmyfriend
2 жыл бұрын
Apologies, sometimes I'm in a hurry when I make these videos, here's the tool I used www.homedepot.com/p/Milwaukee-M18-FUEL-18-Volt-Lithium-Ion-Cordless-Brushless-Oscillating-Multi-Tool-Tool-Only-2836-20/314292748?source=shoppingads&locale=en-US&pla&mtc=Shopping-RM-F_DYNM-G-D25T-Multi-MILWAUKEE-NA-NA-PLA_LIA-NA-RMP-MK111111111_1111111111_FY22_4051_LowFunnel&cm_mmc=Shopping-RM-F_DYNM-G-D25T-Multi-MILWAUKEE-NA-NA-PLA_LIA-NA-RMP-MK111111111_1111111111_FY22_4051_LowFunnel-71700000090253678-58700007642406104-92700069067207707&gclid=Cj0KCQiAmeKQBhDvARIsAHJ7mF780vTwED0zSJJU0FiYwRX2mc2S3EuJ8rTwHHosNcJJoFfvNfdrnkEaArxXEALw_wcB&gclsrc=aw.ds
@yourfriendandmyfriend
2 жыл бұрын
I used to use the dremel, but a coworker told me about the multi-tool. I like it a lot better because it has the reach that the Dremel did not. One of the downsides is it's louder, but it is a heck of a lot faster! Hearing protection recommended, also warning the customer of the noise
@yourfriendandmyfriend
2 жыл бұрын
I will try to make a video showing me cutting the frame next time and how I do that and I will tag you in it - most of the time I'm working alone and I use both hands when I'm cutting so I can't hold the camera
Пікірлер: 32
Excellent video! I do things a little different but we all get the same end result! Usually my cut takes anywhere from 10-45 min all depends on the age of the building, I’ve come to realize the new buildings are a lot more easy when it comes to cutting the studs…. Thank you for taking the time in this video I’m sharing with my apprentice employees!!! 👍🏼
@yourfriendandmyfriend
2 жыл бұрын
Thank you for watching / commenting! I hear you in regards to the age of the building!
You sir, are a magician. Well done, nice techno beat.
It’s been awhile since I cut a strike and I’m fixing to start cutting in 400 strikes, this was a great video reminding me how to do it thanks.
@crzykev11
3 ай бұрын
Wish they wouldn’t have ordered hes1006’s but they did. There are so many strikes that look so much better
@user-lq3ji9kb7z
17 күн бұрын
@@crzykev11 HI, can you mention one that works better than the HES.. I am in the process and doing research.. so many out there..
This is how you do a demo video. Great job!
@yourfriendandmyfriend
3 жыл бұрын
I'm glad if you're able to take something away from it!
@pcdoodle1
3 жыл бұрын
We have a space with an entry door that uses one of those 5" square paddles to egress. I think I might be able to use one of these strikes to add keycard access while keeping the functionality of the existing lock. Thanks again for posting this.
Good job
Skills 🍻
How often do you replace the blades? And what blades do you use?
I've always used a rotary tool with metal cut off disks, heard of guys using angle grinders, was just talking to a long time friend in the field about using a multi tool, those blades are expensive aren't they, how many strikes can you cut in with one?
@yourfriendandmyfriend
2 жыл бұрын
I would say the cost is comparable to a pack of Dremel Wheels. As long as I'm not trying to cut too fast, apply too much pressure, and as long as I'm using my cutting wax those blades last a long time. I haven't counted but it feels very comparable to the dremel. Also, they're not too expensive.
@lowvoltageghost888
2 жыл бұрын
Other than expensive they are more Safe than Dremel Blades breaking and flying all over the place, I would recommend the Diablo Blades for the multi-tool, they a bit more expensive but I have manager to cut at least 5 Electric Strikes straight with 1 Blade.
I feel you done this many times.
Ever done a transfer hinge? I'm struggling with how to get the wire through the door frame
@yourfriendandmyfriend
Жыл бұрын
I have done transfer hinges. Couple different styles. Sometimes the electrician runs conduit for us. Sometimes we have to fish it. If I have to fish, I'm usually in the wall if it's open, or if I can come down the door frame from above the ceiling
@yourfriendandmyfriend
Жыл бұрын
Also, sometimes I've had to use a drill bit 4 ft long to get a hole in the top of the door frame...
@Magicagic89
4 ай бұрын
u have to get a long bit that bends and drill thro the door from the hinge to the lock !!its fun careful to not drill out from the side of the door !!
Mine stoped working ..can't figure out what's wrong .doesn't stay locked
@yourfriendandmyfriend
4 ай бұрын
It could be one of several things. Check your power supply, check your fuse in your power supply for the lock, it might be the strike/lock itself. They are rated for about 50,000 duty cycles, so if it's a high traffic door, depending on traffic, you might get 5 years out of it...
You should have demonstrate how it works too fully functional
@yourfriendandmyfriend
3 жыл бұрын
Apologies, I should have but sometimes I do this on the fly and don't plan it out. I will for future videos
Show the cutting video please.
I'm planning on doing a video of the same installation process, I made one already cutting and installing a HES Strike 8000c on a woodframe, now I need to do a video on a Metal Frame, great work buddy. kzread.info/dash/bejne/pmin2NZvcqyboto.html
@yourfriendandmyfriend
Жыл бұрын
awesome! send me a link when you're done - I'll check it out!
I searched for this video for the sole purpose of seeing what tool you use to cut and how you use it and you completely skipped that part. hah
@yourfriendandmyfriend
2 жыл бұрын
Apologies, sometimes I'm in a hurry when I make these videos, here's the tool I used www.homedepot.com/p/Milwaukee-M18-FUEL-18-Volt-Lithium-Ion-Cordless-Brushless-Oscillating-Multi-Tool-Tool-Only-2836-20/314292748?source=shoppingads&locale=en-US&pla&mtc=Shopping-RM-F_DYNM-G-D25T-Multi-MILWAUKEE-NA-NA-PLA_LIA-NA-RMP-MK111111111_1111111111_FY22_4051_LowFunnel&cm_mmc=Shopping-RM-F_DYNM-G-D25T-Multi-MILWAUKEE-NA-NA-PLA_LIA-NA-RMP-MK111111111_1111111111_FY22_4051_LowFunnel-71700000090253678-58700007642406104-92700069067207707&gclid=Cj0KCQiAmeKQBhDvARIsAHJ7mF780vTwED0zSJJU0FiYwRX2mc2S3EuJ8rTwHHosNcJJoFfvNfdrnkEaArxXEALw_wcB&gclsrc=aw.ds
@yourfriendandmyfriend
2 жыл бұрын
I used to use the dremel, but a coworker told me about the multi-tool. I like it a lot better because it has the reach that the Dremel did not. One of the downsides is it's louder, but it is a heck of a lot faster! Hearing protection recommended, also warning the customer of the noise
@yourfriendandmyfriend
2 жыл бұрын
I will try to make a video showing me cutting the frame next time and how I do that and I will tag you in it - most of the time I'm working alone and I use both hands when I'm cutting so I can't hold the camera
@lowvoltageghost888
Жыл бұрын
@tonyunderwood6972 kzread.info/dash/bejne/pmin2NZvcqyboto.html