I've had mine for almost 6 months and I'm still very satisfied with it. Well worth the 360 and 125 for installation

@BrandonStellmach

2 жыл бұрын

Yeah I totally agree, best sounding exhaust for the corolla!

@michaelcoleman5950

2 жыл бұрын

@@BrandonStellmach agreed

@anthonyramos6874

5 ай бұрын

Link for the exhaust please

Sounds great! My 95 corolla has a regular muffler but aftermarket headers, no resonator and straight pipe all the way to the muffler. It sounds decent for not being loud. But this sounds great!

@BrandonStellmach

2 жыл бұрын

Yeah I would always want a muffler on my exhaust just to tame it down, so it doesn’t sound horrible!

Just ordered my Brola Exhaust so excited i had to come back and rewatch the videos amazing work man!

@BrandonStellmach

Жыл бұрын

I loved how the borla exhaust sounded! Definitely recommend it!

@CarlosGarcia-cq8cd

6 ай бұрын

Did it come with bolts if not which ones did you order?

@chrispoopi-qi3qg

3 ай бұрын

@CarlosGarcia-cq8cd you use the oem ones, just spray some wd-40 on them so they can come out easily, unless you really want to you can order new ones

I love how it sounds!

@BrandonStellmach

2 жыл бұрын

👍 👍

Great work on the corolla! sounds sweet!

@BrandonStellmach

Жыл бұрын

Thank you! 🙏

Sounds freaking beautiful

@BrandonStellmach

2 жыл бұрын

Yes I think it sounds great too!! 👍 👍

rainbows and sprinkles came out the first time you started it up! 🤩🤩🤩

@BrandonStellmach

2 жыл бұрын

😂 yes it did!

I have that borla on my 2011 corolla s and i still love it…i just need to get the steel headers cold air intake and a test pipe to replace the catalytic converter

@BrandonStellmach

Жыл бұрын

The borla was a great sounding exhaust for the corollas! And adding headers made it sound a little bit better!

Wow I wanted to do a full exhaust for my E140 but after hearing this I’m scared because I don’t think it can physically sound any better than this

@BrandonStellmach

Ай бұрын

This Borla definitely makes this Corolla sound really good!

Loved it. ❤

@BrandonStellmach

11 ай бұрын

Thank you! 🙏

Bro I bought this for S when I got it. I didn't want a full cat back. It's perfect, kinda way louder than expected. My gf drove it so i could hear it when I was driving behind her in my other car. It's not that rice hollow can bullshit rasp. Only thing is I had ppl try to race me cause that 132hp 4spd auto and 2850lb car has to Rev to get anywhere in traffic 🤣. The vid doesn't do justice. None of them do

@BrandonStellmach

2 жыл бұрын

Yeah it was louder than many videos I saw! But it does sound SO much better than most of those raspy Honda civics. Yeah I wish these corollas were faster, hopefully soon I will be doing some more engine mods to my corolla!!

@jetcitykitty

17 күн бұрын

My e120 weighs about 2,600 lb 125HP@5800

Haha would’ve done the same if they made one for my car, unfortunately I’m running straight piped on headers lmao, doesn’t sound the best, but I like it, def will get a exhaust or custom soon haha

@dylahaw

2 жыл бұрын

Was this muffler custom? Or set for your car? Jt is so hard to fine exhaust parts that are fbo and not just universal lol. But sounds deep and nice, wayyy better then muffler delete haha

@BrandonStellmach

2 жыл бұрын

@@dylahaw this was made for the 2009-2013 corollas. So it was a direct to bolt on for my car. And I’ve been wanting to put some exhaust on my Camry, but I was hoping for a bolt on, and nobody has yet. But I bet your Camry is super loud with just a straight pipe from the headers, I bet your neighbors love you!! 👍

I’ve been thinking about performance upgrades a lot recently

@BrandonStellmach

2 жыл бұрын

I have done a few and I can feel a difference in the power! Like 👍

I like those wheels 👍 what are the name of the wheels you have on your Toyota Corolla and where did you buy them from? Great video man 👍

@BrandonStellmach

2 жыл бұрын

They are niche m117 Misano 18x8.5 with Nankang 225 40 18 And I got them from figment industries. I ordered them as a set. And they came mounted and balanced. And I just had to put them on the car!

@marvelousmarvin956

2 жыл бұрын

@@BrandonStellmach that sounds great man 👍 thankyou for the information I really appreciate it man 👍

I know its been a while but how did you get it to pop like it did in the intro? Been thinking about getting a borla axleback for my xrs

@BrandonStellmach

Ай бұрын

This is just a stock motor with, Headers, Intake and the Borla exhaust. And it will naturally want to do that.

Hey can I do this to a 2008 Toyota Corolla sport? And where would I buy it? Tysm!

@BrandonStellmach

2 жыл бұрын

This exhaust will only work for 2009-2013. I’m not that familiar with that generation corolla. But o would imagine they sell something for it!

Hey what type tires and rims did you buy. I’m kinda interested. They look really good.

@BrandonStellmach

Жыл бұрын

These are the wheels and tires I have. niche m117 Misano 18x8.5 with Nankang 225 40 18 tire.

Do you think your DNA headers change the sound of the borla? I have the borla but have stock headers.

@BrandonStellmach

2 жыл бұрын

I think so! I think it sounds louder and a little bit deeper of a tone!

hi so i have a 2009 corolla type s, but it’s an automatic, do you think it’s worth installing this? i really want my car to sound sweet, i already installed a cold air intake and sounds great

@BrandonStellmach

Жыл бұрын

I see many automatics put them on their cars and they sound good. The only thing with a automatic is you can’t really hold the higher RPM’s to get the exhaust to sounds the same as a manual.

Bro looks great, what kind of headers? I have a 16.

@BrandonStellmach

9 ай бұрын

I was running DNA headers, which were discontinued since I installed them!

What size bolts did you order? I have the exact same year but an S.

@BrandonStellmach

Ай бұрын

These are the bolts I ordered. www.monkeywrenchracing.com/product/qrp-bolt-and-spring-kit-exhaust-manifold-outlet-2zz-2gr/

What is the socket-size of the fasteners?

@BrandonStellmach

Жыл бұрын

It’s been a while since I did this, it’s think it’s either a 19MM or a 21MM.

I actually put this on my 10 corolla S, really like it but. Mine doesn’t stick out at all and is starting to char my bumper. Any ideas? Can’t really put it on wrong? Maybe because it’s an S or? I wanted it to stick out 😒

@BrandonStellmach

2 жыл бұрын

This exhaust is made for the corolla S. Because you have the body kit, which sticks past the car and the exhaust is inside it. Since I don’t have the body kit you see the exhaust stick out much more. But I don’t think there really is a way to get it to stick out more unless you have someone weld on a longer exhaust tip!

I actually want to swap out my stock exhaust system but overall I don’t like too loud of an exhaust. How’s the sound barrier on this one? Anyone know of some that are louder than stock but quiet than some tin cans? Lol

@BrandonStellmach

2 жыл бұрын

This exhaust isn’t to loud at low RPM. It just gets kinda loud at higher RPM. But it doesn’t sound like a tin can at all. It sounds good. But for other exhaust there isn’t any other ones that bolt onto the car. Otherwise you will have to have one welded onto the exhaust by an exhaust shop.

It sucks how many nice parts were for the upper trims only. Wish I could swap the not-dull-orange cluster over from an S, but odometer data is stored in the cluster, not the ECU.

@BrandonStellmach

2 жыл бұрын

Yeah it does, but luckily you can modify things to make them better, I have a video coming out for swapping out the cluster, so stay tuned for that!

@ProjectBlackweather

2 жыл бұрын

@@BrandonStellmach Been subbed so I can do mods to mine. I've got LEDs on the way for the AC cluster LEDs since I have to replace the vent damper dial wire anyway Hoping my fusebox has lugs for the foglight relay, because I've got the OEM wires, otherwise I'm also gonna be following your foglight vid.

@BrandonStellmach

2 жыл бұрын

Thanks for being subbed. 👍 I hope some of my videos have helped you out!!

Do you still have a resonator on by chance ? I might put one on my Camry, but mine is fully straight piped at the moment.

@BrandonStellmach

7 күн бұрын

Yes I had a stock exhaust, except for the muffler was switched to the Borla!

@OhSheWasOnly17

6 күн бұрын

@@BrandonStellmachokay. Thank you so much 😊

Do you have aftermarket headers? If so, how did you find them because I can’t find a single header for my 09 rolla S

@BrandonStellmach

Жыл бұрын

Here is the link but they look like they are sold out. ebay.us/Ncg3uQ They are DNA headers. Maybe you can find another www item selling them.

@cadekeller8963

Жыл бұрын

@@BrandonStellmach thanks

Did you tune ur car after switching the exhaust?

@BrandonStellmach

6 ай бұрын

After the exhaust install I did not. But I eventually got a tune a few months later. It is not required unless you want the most power.

Worth getting on the automatic 4spd? Notice any performance increase?

@BrandonStellmach

16 күн бұрын

Not much of a performance gain, but definitely sounds much better!

Nice, but at the end you finally say you got a header ! That flows more exhaust and will sound off more than stock ! Should have said that at the beginning man...

@BrandonStellmach

2 жыл бұрын

Sorry about that. I always forget new people come to my channel. But if you were watching my videos before this you would have seen I installed some headers the week before.

@paulzimmermanjr.3226

2 жыл бұрын

@@BrandonStellmach Oh well, thanks for the reply.. I've never seen you on here before, didn't catch that. I was surprised to even see this, since I have a 2004 & have been shopping for another muffler. I replaced my resonator with a glass pack & run a Turbo muffler. It's quite deep at idle, but you can't here anything cool when driving, just some drone, lol..

Awesome mod. For my 03 Corolla,.I have magnaflow cat back. How did you attach camera to bumper? 🤔

@BrandonStellmach

2 жыл бұрын

Magnaflow sound really good too! And I had a suction cup mount for my camera!

Hey man I just got this and am having trouble with getting the 2 bolts to thread with the springs on the new one. It seems like I can never get them both on and threading without one popping out. Already got new screws and springs coming. Any tips on where to put the vice grip or vice grips? Did you use 2 or just one? And did you put them on the sides where the bolts are or top and bottom. Any feedback helps thank you man!

@BrandonStellmach

2 жыл бұрын

When I was doing this is took me about 30 minutes to try and get those screws in. But I think I had them on the bottom close to the bolt holes. But I had 1 set of vise grips to hold onto one side and another set of just normal pliers squeezing to try to get the flange closer to the threaded hole, while trying to get the bolt to thread In. If you got more than 1 person it might help, but it’s doable with 1 person!

@nickkowalski5761

2 жыл бұрын

@@BrandonStellmach Thanks, I’ll try that. I must’ve been on it for 45 min last night but i’ll have to try with the vice and the regular channel locks this time. I’ll reply back once I get it on.

@BrandonStellmach

2 жыл бұрын

Yeah they are a big pain, and another tip is to make sure you try to thread them in evenly. So just get the first one started a few threads and than try to get the other one, and slowly tighten them both evenly.

@nickkowalski5761

2 жыл бұрын

@@BrandonStellmach Hey man just wanted to come back to say i got the bolts on nicely now. I think I just needed the new bolts so the threads were fresh and wouldn’t just strip when I tried to put the vice grip on. The exhaust sounds good now I like how it still sounds deep and rich without the rasp.

@BrandonStellmach

2 жыл бұрын

@@nickkowalski5761 that’s awesome! Glad to know you got the exhaust on and you like it! But the new bolts probably made it easier!

I know you have a different exhaust now but when you had the borla on cold start was it loud like it will wake up you neighbors? I don't want to be that person.

@BrandonStellmach

Жыл бұрын

No the car was not that loud. If you keep all the cats and resonator it’s pretty quite.

How much for you to install the exhaust on my Corolla 2012 S

@BrandonStellmach

2 жыл бұрын

Sorry but I don’t work on other peoples cars!

Question the installation needs welding !! or is it easy to install ???

@BrandonStellmach

2 жыл бұрын

There is no welding, you just need to unbolt the old one, and bolt the new one in. It might be a little hard if the bolts are rusty, so a good impact might be needed!

@bryanmilanovich2585

2 жыл бұрын

@@BrandonStellmach thank you bro !!I will buy it ! and i will pay for installation My car is Toyota Corolla model s 2010

Delete the resonator trust me i did it to my 2013 rolla and it sounds amazing

@BrandonStellmach

2 жыл бұрын

Your not the first one to say that! I will definitely have to do it in the future and see how it sounds!

So I bought a corolla for reliability reasons but I wanna do engine mods. You had any problems so far?

@BrandonStellmach

2 жыл бұрын

I haven’t had any problems with any of the mods I have done! And if anything my MPG has actually gotten better than it was before!

@azhule4041

2 жыл бұрын

Just wait to do cams/flash tune until you've done all else. I decided to work from front to back, but I wish I saved a bit more before doing the cams so I can buy the tune first.

Sounds great! Would this fit on a 2005 rolla?

@BrandonStellmach

Жыл бұрын

Thank you! And sadly this is only for the 10th gen corolla. I’m not sure if borla makes one for the 9th gen corollas.

@mikeep19

Жыл бұрын

@@BrandonStellmach where did u get em? I got 10.5 gen

@BrandonStellmach

Жыл бұрын

@@mikeep19 here is the link, I ordered it from Amazon. amzn.to/3gfbVLH

Does anyone know if this brand make one for a 2016 Toyota Corolla hatch back ? :)

@BrandonStellmach

20 күн бұрын

Yes they do, they are a slightly different part number!

Does the after-market exhaust increase power?

@BrandonStellmach

16 күн бұрын

There is a slight increase, only a few HP.

will this exhaust fit on a 2013 hatchback?

@BrandonStellmach

Жыл бұрын

I’m not sure, I know this will fit a 2013 sedan corolla. I’m not sure about the hatchback version!

@yakoau6540

Жыл бұрын

@@BrandonStellmach ok thanks

I drive with my music to loud to even care about this lol

@BrandonStellmach

2 жыл бұрын

😂 understandable!

Do you have the 1.8 or 2.4 liter?

@BrandonStellmach

Жыл бұрын

This is the 1.8L!

@felka-bread

Жыл бұрын

@@BrandonStellmach awesome

Does this work on a 2009 Toyota Corolla XRS?

@BrandonStellmach

16 күн бұрын

Yes it does, according to the link!

@Parker.rose1

16 күн бұрын

@@BrandonStellmach I bought it and love it! Your videos helped inspire my build a ton, thanks man!

What kind of bolts did you buy?

@BrandonStellmach

2 жыл бұрын

I order them from monkey wrench racing. Here is the link I bought: www.monkeywrenchracing.com/product/qrp-bolt-and-spring-kit-exhaust-manifold-outlet-2zz-2gr/

@envious-player8422

2 жыл бұрын

@@BrandonStellmach will it fit the 2010 model?

@BrandonStellmach

2 жыл бұрын

@@envious-player8422 yes these will fit a 2010 corolla. But you might not even need them if your existing bolts are good. I only replaced mine because they were rusty and rounded out.

Does that Exhaust fit in a Corolla le 2011?

@BrandonStellmach

2 жыл бұрын

This will work on a 2011, just remember that you have a LE, so you will need to cut the bumper like I did! But everything will bolt up.

@jeansanchez2277

2 жыл бұрын

@@BrandonStellmach is this the only exhaust that is bolt on for the 09-13 corolla? I have the LE but do not want to cut or have welding done just wanna have a new exhaust bolt it on for my daily lol

@BrandonStellmach

2 жыл бұрын

@@jeansanchez2277 from what I have seen, this is the only bolt on exhaust for this car. Another thing you can do if you do not want to cut the bumper is get a hairs hanger extension, so that way you can lower below the bumper, but still have it connected with a hanger.

@jeansanchez2277

2 жыл бұрын

@@BrandonStellmach would an 09 S rear bumper to swap with my LE work? Would I be able to use the same taillights etc?

@BrandonStellmach

2 жыл бұрын

@@jeansanchez2277 yes it will fit as long as your car is also a 2009 or 2010. But just know that when you get a S bumper, they usually don’t come with the valances, and they have holes in the bumper for where they are supposed to fit.

Hello i recently bought one and its on the way but i would really hope you could answer. I really wanted to know if this is under the 95dbA California sound limit. or is it a bit louder than that?

@BrandonStellmach

2 жыл бұрын

I wish I knew. But I do not. I live in Florida, so I don’t have any emissions or yearly checks on my car.

Hi, Brandon. Do you want to sale your borla exhaust?

@BrandonStellmach

16 күн бұрын

I have already sold it!

Just when I have money to spend because I know it used to cost 359.99 now it’s 445 😢

@BrandonStellmach

Жыл бұрын

Yeah when I bought mine it was $360. It looks like supply is running low. So they bringing the price up. Maybe try and check another website and see if they are cheaper.

Anyone remembers it used to cost 180$... Now, the wait was a waste... I should've bought it when I saw them at 160$ 🤣🤣☠️👻

@BrandonStellmach

Жыл бұрын

That would have been great deal to get for $180. I paid about $340 for mine. And they are now like $420. 😂

@jshoogs6195

Жыл бұрын

533 as of today

Yeah I’m buying this fits my 2010 corolla it’s WRAPS LMAO

@BrandonStellmach

Ай бұрын

Its a great sounding exhaust for the corolla!

Will this mod make your car save more gas ?

@BrandonStellmach

16 күн бұрын

No this will not, especially if you like the sound it will make you want to drive the car more and use the gas faster!

@hibrucetzenh6170

16 күн бұрын

@@BrandonStellmach u were right LOL

Watching other borla exhaust without the header. It sound ricey when they let go of the gas peddle when they hit the rev limiter.... it has that farting civic can sound...

@BrandonStellmach

2 жыл бұрын

So the headers do make the exhaust sound better! At least to me I think it sounds better!

Is it loud enough to attract cops and wake neighbors?

@BrandonStellmach

2 жыл бұрын

It’s not very loud on cold start, it is loud but not loud enough to wake neighbors. And it does get pretty loud when you are getting in the high RPM’s. So it could attract cops!

@viks737

2 жыл бұрын

@@BrandonStellmach thank you so much for your reply, so I can drive without getting noticed at RPMs below 3000 right?

@BrandonStellmach

2 жыл бұрын

@@viks737 I would say that under 3000 would not be that loud. So you would be pretty safe!

How did you make it pop?

@BrandonStellmach

2 жыл бұрын

I have DNA racing headers on my car, and if you hit the gas the right amount you can make it pop and crackle a little bit. Otherwise you would need a tune to make it pop much more.

Hit the limiter!!!!!

@BrandonStellmach

9 ай бұрын

Yes! 👍

How much did it cost ? And where did you get it from sounds amazing

@BrandonStellmach

2 жыл бұрын

It was about $360. And I bought it on Amazon. I have the link in the description if you are interested!

@rufinozuleta7103

2 жыл бұрын

@@BrandonStellmach would this fit my 2003 Toyota Corolla S

@BrandonStellmach

2 жыл бұрын

@@rufinozuleta7103 no this will only fit the 2009-2013 Toyota Corollas.

@hibrucetzenh6170

6 ай бұрын

@@BrandonStellmach will it's fit corolla 2010 LE ?

@BrandonStellmach

6 ай бұрын

@@hibrucetzenh6170yes this will, the only thing you will have to do is cut your bumper or get a longer exhaust hanger. Because the S models already have a cutout for the tip.

Have you noticed a serious difference in power?

@BrandonStellmach

2 жыл бұрын

I can definitely feel a difference, I haven’t done any 0-60 test yet! 👍

@TBsoftair

2 жыл бұрын

it's an NA car, you won't get any difference in power from an axle-back aftermarket muffler...