Okay, but does a Woodskil Belt Sander work on METAL? kzread.info/dash/bejne/rH9np7monNK3gso.html

I have a 99 E350 Super Duty, play/work van, I put a set of mismatch tires from my local Mexican tire shop, mounted them at home with beads and they ride as smooth as butter! Not to mention the whole set only cost about $260.

Great video!! Thank you for your time in sharing it with the world. We've been selling the product for 15 years. And happy customers like you are why we keep going.

5:08 There is no greater joy than finding a good make of tire for your ride.

Awesome video brother. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT brother

Years ago in the days before TPMS sensors my dad would put about 2 cups of antifreeze in each tire. Worked every time.

@PerpetualProjects

11 ай бұрын

That makes good sense, good tip there!

I run a tire shop and have had people ask me to take them out. they usually scatter over frost cracks and rail road crossings. shake and then rebalance. same with start up shake some then balance at a higher speed. I will use them in semi tires as I cannot justify spending 15k on a truck tire balancer.

Excellent video

@PerpetualProjects

8 ай бұрын

Thank you very much!

They use beads in motorcycle tires all the time and they seem to work well. I use them on all my motorcycles. I'm going to be putting beads soon in the original wheels I just restored for my '67 beetle and I found this video while researching. I hate the thought of clipping weights to the lip of my freshly painted wheels or having the grey foam residue stuck to the wheels every time I have the tires re-balanced.

@PerpetualProjects

8 ай бұрын

We also use them in semi trucks and they work well there too.

@John-so4op

2 ай бұрын

Roughly how many ounces would you put in motorcycle tire

Totally like this guy lol good ole NORMAL dude that ain’t trying to hard to make a dang how to video

Thats cool

Thank you for this. I love balancing beads. I had seen a video where someone put balance beads in one tire and then went for a test drive and said, “ well I guess they don’t work because it’s still vibrating.” Then he proceeds to say he doesn’t recommend them. Well I also don’t recommend balancing one tire and leaving the other three alone and expecting the vehicles tires to suddenly be balanced lol. My experience with them has been good even with low profile tires. 215/40r18 Kumho Ecsta All Season Performance tires on a 2006 Corolla CE 5 Speed. Lowered on BC Coilovers with the upgraded Swift springs (worth the upgrade) and 5Zigen wheels. The wheel company used to be a relatively well known reputable wheel company through the 1990’s and early 2000’s. I found mine for $200 for the entire set with tires that had 75% tread life left and no dry cracking. Kid didn’t listen to his father when he asked him to clean out his extra car parts for his 2008 Subaru WRX in the garage. And he ended up selling them super cheap to get the message across to him lol. So thank you kid whoever you are for making your dad sell me your wheels and tires super cheap lol. 8” wide as well! So I was really happy with the fitment and offset. But I didn’t want to waste money balancing the tires in case they ended up not being good from sitting. So I had balance beads in my garage already, put them in through the valve step and used a hair clipper to vibrate the valve stem to get them falling through much faster. Shoutout to another KZread video I saw doing the same thing lol. And they went from a little vibration at 75-80 mph to silky smooth all the way up to 100 mph which was as comfortable I was going on tires that I had just gotten and had been sitting for an unknown amount of time. So I really enjoy these balance beads ease of use and results.

@PerpetualProjects

Жыл бұрын

Yeah doing just one makes total sense 😂 Good tip on the hair clippers, and that was a really good deal on the tires and rims! It sounds like you have a really cool car.

Yes sir the beads work. 👍👍 they also have a pulling felling to the road that makes it ride smoother as well. HOWEVER they do wear out and turn to powder. Usually in a year depending on miles you drive. The ceramic can also wear the inside of the tire depending on compound. Ive found the stainless works better and for longer with less wear to the inside, but you better have steel wheels. Th rims will get bead blasted no matter what you use.

@PerpetualProjects

Жыл бұрын

Steel wheels, check. According to the advertisement on these they aren't supposed to break down or wear the tire so hopefully I don't run into those problems. I won't be dismounting them until the tires are wore out or the get out of balance enough to notice it,. So we'll just have to wait and see.

@verohandymike

8 ай бұрын

@@PerpetualProjects Word is you have to make sure you're using silica glass beads. Any other knock-off will cause issues.

Great video buddy... Did you use any special valves to avoid leak through the nozzle with regular valves?

@PerpetualProjects

5 ай бұрын

I believe the kit included valve stems, but in the past on semi-trucks I have done it both ways.

Your truck reminds me of one i used to have. I had a white lifted 1985 W250 4+4 was a good truck but once it started rusting it didn't take long and it was real bad! 4"Ranchero lift on 35" all terrains.

@PerpetualProjects

5 ай бұрын

That sounds like a cool truck. I want to build a nice 80's swb 4x4 someday.

@paulcondie2520

5 ай бұрын

​@@PerpetualProjects I love the front end on the year, looks beastly! Good question, best bead? And how long before the ceramic beads break down? Always wanted to run beads in past but just never did. Going to try them on next set! 💯 I have 33's on my Silverado now, got a crazy cheap deal on wheels n tires but tires don't measure 33! Lol. Should of just went 35. Thanks

Well there's a toyo tire plant not far from me just north of Cartersville Ga along U.S. highway 411

I used non biodegradable airsoft bbs. So far so good

@verohandymike

8 ай бұрын

Word is you have to make sure you're using silica glass beads. Any other knock-off will cause issues.

Looking to do the same for my D350 crew cab dually. I am tired of shaking my way down the road.

@PerpetualProjects

Жыл бұрын

Totally get that!

I love balancing beads.

@PerpetualProjects

Жыл бұрын

They work great in semi tires. I am pretty sure I have heard you mention using them in a video at some point.

2 years later have you replaced the tires and how did the inside look?

@PerpetualProjects

Жыл бұрын

Hey we only did this video about a month ago but that’s a good video idea for when we do have to replace them! 1200 mile trip on them so far with no issues

I'm a tire tech. The beads we use come with a special valve core, so the beads don't get jammed in the regular valve cores. Do these come with special cores?

@PerpetualProjects

4 ай бұрын

I don't remember if these did but some kits do include the valve cores.

They dont work well with 35" radar renegade a/t on my 22 ram. Have to get them taken out and rebalanced with weights. Everything shakes once i get above 55 mph.

Yes we use beads on all big tires with special rims because no body wants to see those stick on weights.

. Peace.. Shalom.. Salam.. Namaste 🙏🏻 😊 🌈 ✌ ☮ ❤

Problem!!

@PerpetualProjects

Жыл бұрын

Challenge!

मुझे टायर के बारे में जानकारी लेना है

Do you still like the beads?

@PerpetualProjects

9 ай бұрын

Yes, I have a few thousand miles on them now and they are still working.

Made in the USA

They don’t work. I have tried twice . A traditional weighted balance works better for a smooth ride . Beads are lame

@PerpetualProjects

7 ай бұрын

So far I am happy with them, but to each their own.

@norbertnagy5514

Ай бұрын

*They don't work for you.* You can't just say everybody is bsing or being paid it sounded a little like that.

@geraldmcclintock2567

Ай бұрын

@@norbertnagy5514 very well. The beads didn’t work for me . I thought my post would help some folks out because it’s pain to re-do and uninstall the beads and then get a traditional weighted balance. I tried beads twice unsuccessfully. Then went to a tire shop that specializes in larger tires and the owner with 20+ years of experience also made the comment that beads will not get the nice smooth hwy ride of a traditional balance . So I’m just letting people know what i learned with my two personal case studies and the opinion of an experienced tire shop owner. I was running 35” cooper discoverer at3 . They traditional balanced well but didn’t like beads . Really enjoy the tires . I like to try new gadgets on my truck and beads are off the list because “they didn’t work for me”.

@norbertnagy5514

Ай бұрын

@@geraldmcclintock2567 thank for describing your experience alittle more in depth