wow! I really hated that I did not have a sway bar disconnect on our bronco. Problem solved! I really appreciate the detailed explanation on wiring it! Can't wait to check your other content to see what else I can upgrade! Thanks!

Excellent job on the electrical sway bar installation. Thanks for posting the video. I wasn’t quite happy either that my Wildtrack didn’t have one. Demo at the end was icing on the cake. You are genius!

Dude awesome video. My only hang up on a Wildtrak was the missing sway bar disconnect. This solves all my problems!

Bad ass bro! I’ve been thinking about this for my outer bank Sasquatch. Thanks!!!

This is going to sound very sarcastic but I actually mean it. I wish I was in the position to where I could buy one car and while that car is getting made by another one. Just seems so awesome to me.

@stinkyfabracing

9 ай бұрын

Well the full truth is that when i ordered it, i couldn't afford it either. Things changed, I sold a very nice Jeep we built for the shop, and a year later the shop could afford it, but ford hadn't built it so I bought a different one for the business. 7 more months later they finally built it, and i couldn't afford a second one, but also couldn't pass up on the huge discount that it came with via price protection, so I talked a family member into buying it instead.

Great detailed video… I have a Wildtrak as well and would like to do this. Besides the flex test is there any way to know it is disengaged or rather engaged? Can the swaybar re engage at any angle or does it have to be on level ground?

@stinkyfabracing

8 ай бұрын

It's pretty noticeable in the roll characteristics when you're driving, but other than the switch position and light on the switch there isn't any indication of if it's engaged or not. You can turn the switch off the switch any time, and it reconnects once it gets to the "level" position. You don't have to be on flat ground to re-engage, but it won't actually reconnect until the suspension gets back to center.

@BertMiscerson

8 ай бұрын

@@stinkyfabracing interesting! Thanks for the reply. I’ll have to add this to the list!

Appreciate the video. Exactly what I was looking for. Do you know if this works with the Fox shocks on the 23 Wildtrak? I would think it’s the same but at the same time, I wouldn’t be surprised if Ford switched other parts to make things not compatible. Thanks

@stinkyfabracing

8 ай бұрын

as far as I can tell all they did was swap different shocks onto the 23 wildtraks. I don't see any reason it wouldn't still fit, as the connections at the control arms are still the same.

@ryanadventureeverything8758

8 ай бұрын

Thank you

Hello, I have a brand new wildtrack. Installing this part - would I lose any functionality and stability of the drive? Wildtrack is made for faster drive through dirt and rough surfaces and comes with sports mode, any harm installing this and losing any of the bells and whistles of wildtrack driving capabilities?

@stnkbg1

5 ай бұрын

When engaged it's the same as the non disconnect sway bar in your wildtrak. The bronco in the video is a wildtrak as well.

@user-dw2vh9sy4b

5 ай бұрын

@@stnkbg1 thanks bud:)

Question on bolts. Did the disconnect come with new bolts or did you have to use the ones that came off the stock sway bar?

@stnkbg1

Ай бұрын

It uses the same bolts

@JosephCorriero

Ай бұрын

@@stnkbg1Thank you! Ordered the sway bar disconnect and have the harness. Going to install as soon as it gets here.

Have you had any issues with this method of install since you first installed the disconnect?

@stinkyfabracing

28 күн бұрын

@paulvasta6159 nope, it's been flawless. I generally flip the switch right after airing down and leave it disconnected until i hit pavement again. Bronco has no idea it's even there.

That's awesome! Where is SFR located?

@stinkyfabracing

9 ай бұрын

All of our products are manufactured in Southern California, but www.stinkyfab.com is where they are sold.

The Bronco Raptor has sway bar disconnect as well. And I’ve got a Ranger Raptor on order. It’s got front and rear lockers……I’m wondering if this video would help me reference a Bronco Raptor disconnect into my Ranger Raptor!?!?

@stnkbg1

5 ай бұрын

The ranger raptor has more in common with the standard bronco than the bronco raptor. The entire front frame and suspension sections are the same as far as we could tell from the Ford 3D models. The badlands disconnect would likely bolt right up. No idea if the braptor one would or not.

@jasongaudreau2075

4 ай бұрын

@@stnkbg1can’t wait to find out. Hook it to an aux like this gentleman did…and boom…f+r lockers already come standard.

You are a genius. I have the Bronco Raptor and hate that I have to be in 4 wheel drive just to disconnect. A lot of trails where I’m at in the Rocky Mountains benefit from the sway bar disconnected with ruts and rocks, plus gives a more plush ride, but hate that I have to run around in 4 wheel drive just to disconnect. 🙄 Just ordered the wiring harness in your description. Going to keep all the factory wiring as-is so I can just plug back in and be back to stock, but do the wiring up to the AUX switches so I can disconnect whenever I want. Curious if you’d know if I might throw codes? 🤞😅

@stinkyfabracing

7 ай бұрын

I would be surprised if it didn't throw some kind of code, but it might depend on how you hook it up. If you unplug the entire assembly the computer will probably throw a code because it's not getting feedback from the sensors. I wonder if you left the sensors plugged in, while bypassing the solenoid wires what would happen. My guess is that when the sway bar is connected all will be fine, but it'll probably throw an error when you disconnect. The real question is will the error clear when you reconnect?

@daineclark

7 ай бұрын

@@stinkyfabracing oh good point. I’ll see if I can also buy a male version of that plug so I can build me a little bypass without cutting anything and still keeping the connection to the sensors. Thanks for the feedback. 👊😎

@stinkyfabracing

7 ай бұрын

The stabilizer has its own sub-harness that goes from the one big plug and splits to the 4 plugs for the solenoids and sensors. For your setup it might be better to find the connectors for the solenoids directly, rather than the one i used that connects to that sub-harness. This way you could just unplug the solenoids and then plug your new wiring in without cutting anything.

@daineclark

7 ай бұрын

@@stinkyfabracing you’re the man. How do I pay you a consulting fee?

@stinkyfabracing

7 ай бұрын

@daineclark 😂 no need for that, but feel free to take a look though stinkyfab.com and see if you like any of our products!

What’s the cost?

Where did you manage to find one?

@stinkyfabracing

8 ай бұрын

Like I said in the video, any Ford dealer can order the assembly, or you can just use the ebay link I put in the description. That's where I got this one, and google searching the part number will come up with lots of sources.

@sometimesnothinghappens

7 ай бұрын

Have you tried unlocking Rock Crawling GOAT mode with Forscan? I wonder if it would trigger the disconnect and if that would conflict with the AUX 1 position@@stinkyfabracing

How much was the auto sway bar?

@stnkbg1

3 ай бұрын

Price seems to vary but I've seen them frequently for around $1500

@isaacspoon

3 ай бұрын

@@stnkbg1 I just recently got a totaled out 2021 ford ranger lariat tremor, I plan to install this on that ranger. It’s my understanding that the bronco is built on a modified version of the ranger frame. Would love some measurements to ensure this would “bolt up” to the ranger frame as I plan (hope) to do exactly the same thing on a factory rocker switch on the dash in the ranger. If you need my email or cell phone, let me know

How do you get it to reconnect?

@stnkbg1

4 күн бұрын

Turn off the switch.

Did you happen to measure the amount of extra travel

@stnkbg1

7 ай бұрын

That's not really something you can easily measure. The sway bar does not limit actual travel, it limits articulation. The front tires will still travel up and down the exact same distance, the difference is how easily one side can now compress while the other extends. With a standard sway bar (and with this one connected) both sides are joined by the sway bar. The amount of articulation you get is a product of how much load you put on it and how much the sway bar flexes. You'll get more flex on a downhill with all the weight on the front of the vehicle for example. With the disconnect the sway bar is no longer fighting that articulation.

@michaelnice4753

7 ай бұрын

If you measure from ground to the forks that was the measurement I was talking about

@stnkbg1

7 ай бұрын

​@michaelnice4753 i didn't, because that's not a very relevant measurement since it will vary with loading. The suspension was never fully compressed in either lift, and even just lifting front vs. Rear gets a different height because of weight transfer. I can say that after disconnecting i was able to lift roughly 4-5 more inches on each end after disconnecting.