Installing an aftermarket seat in 2022+ WRX VB (Sparco R333)

Автокөліктер мен көлік құралдары

Seat: www.sparcousa.com/product/r33...
Seat Base: www.plantedtechnology.com/pro...
Slider: www.sparcousa.com/product/tra...
Hardware: www.sparcousa.com/product/har...
Resistor: a.co/d/fNokNPE

Пікірлер: 21

  • @HeavyMetalWRX
    @HeavyMetalWRX4 ай бұрын

    I feek like i would be deoaooing the seat in and out depending on race days. Will you be doing shoulder harnesses. I feel like after sonk aybautocross and race days andbtolling back and forth in the seat i eabt to do that.

  • @matthewwain9958
    @matthewwain99584 ай бұрын

    So, do the airbags all fully work after adding the resistor?

  • @randomquickness

    @randomquickness

    4 ай бұрын

    Yes, only difference is the one built into the drivers seat is no longer there. The resistor just tricks the car into thinking it still is.

  • @kylemallett4565
    @kylemallett45652 ай бұрын

    After a month, what are your thoughts? I’m in the Austin area too. Is it a cloth material? Their site just says “OEM Style Materials”. Just starting my search so I’m sure it’s out there already.

  • @randomquickness

    @randomquickness

    2 ай бұрын

    It’s cloth but feels different than oem. You’re welcome to swing by and sit in it.

  • @kylemallett4565

    @kylemallett4565

    2 ай бұрын

    @@randomquickness that would be great. I’m out of town for work the next few weeks but when I get back to town I’ll be contact.

  • @fernandoquiceno
    @fernandoquiceno3 ай бұрын

    Do you any issues with heated seats lights or codes coming up?

  • @randomquickness

    @randomquickness

    3 ай бұрын

    Nope, disconnected the battery during install and used the resistor on the airbag connector (yellow connector under the seat)

  • @swordsmen6
    @swordsmen6Ай бұрын

    My big hang-up was the seatbelt plug - I assumed it needed to be connected to prevent the "Hey, buckle up!" chime. It looks like you're just leaving it disconnected, though?

  • @randomquickness

    @randomquickness

    Ай бұрын

    I plugged it back in

  • @swordsmen6

    @swordsmen6

    Ай бұрын

    @@randomquickness To what? Did you pull the harness off of your stock seat?

  • @randomquickness

    @randomquickness

    Ай бұрын

    Yep, reused buckle and harness

  • @swordsmen6

    @swordsmen6

    Ай бұрын

    @@randomquickness Appreciate the reply. I have a power seat so it looks like there's an extra harness I have to track down.

  • @rawsqd
    @rawsqd3 ай бұрын

    How's the 1 month review so far with this seat? Comfort and dislikes?

  • @randomquickness

    @randomquickness

    3 ай бұрын

    So I’ll say the foam is pretty hard but I imagine more seat time will make it break in more. I did take it on a few 3 hour trips and no issues. The bolstering around the shoulder is much improved over stock. The thigh bolstering is actually pretty similar to stock,just with harder foam. Getting in and out is easy, no weird car yoga like I used to do getting in and out of the 911 with fixed back buckets.

  • @chavascap6482
    @chavascap6482Ай бұрын

    does the sparco seat make you sit lower then the oem seat?

  • @randomquickness

    @randomquickness

    Ай бұрын

    No, it sits very similar

  • @hitstick556
    @hitstick5564 ай бұрын

    Where did u get the resistors?

  • @randomquickness

    @randomquickness

    4 ай бұрын

    Amazon. I have 99 spares lol. If you’re local to Austin, come grab one 👍

  • @FOXROKT

    @FOXROKT

    3 ай бұрын

    What Ohm and wattage are the resistors?

  • @randomquickness

    @randomquickness

    3 ай бұрын

    a.co/d/fFDhfiD

Келесі