Installing Akrapovic Exhaust on Vespa Sprint/Primavera
Автокөліктер мен көлік құралдары
Installing Akropovic Exhaust on Vespa Sprint/Primavera
PMAK-04
www.scooterwest.com/akrapovic...
PMAK-04-IGET (For iGet Motor, 2017 and newer)
www.scooterwest.com/akrapovic...
Пікірлер: 239
I enjoy watching your quiet and professional handwork. 👍
wow, i like that deep basy sound.
Thank you Robot for all the details. Just got mine installed today. The best!
19:20 thank me later
@Biggie045
6 жыл бұрын
Rev It Up thanks bruh
@thebasketz
6 жыл бұрын
You should stay from the start and enjoy those tantalising tatas!
@skinnydudewithculturedtast5329
4 жыл бұрын
Your subscriber 😁
@aleksvelkov8244
4 жыл бұрын
Thanks man
@mr.unknown6141
4 жыл бұрын
Thanks
You are a legend mate. Great videos Robot. Keep up the good work guys.
love the exhaust
The brand of the muffler is pronounced Akrapowitch! Leading brand among sport exhaust systems - made in Slovenia EU.
Always nice for a mechanic to watch robot as I met him in petson already
I've just installed this exhaust on my 2021 Racing Sixties Sprint. This video helped immensely. The hardest part of the entire install is getting the two 10mm copper nuts started on the head studs. If I had Robot's dainty booger hooks instead of these these giant sausage fingers, I would have had a much easier time. BTW! I don't know what the power output is after the pipe install, but I can now easily cruise at 65 indicated. It's about 5mph better than it was prior to the pipe install. WORTH IT!
@mjh5437
2 жыл бұрын
"Booger Hooks" lol.
@safarijonas3490
2 жыл бұрын
"Giant sausage fingers" lol
@cescilhamdimaria10
2 жыл бұрын
Hi what's your pipe model number?
Never thought I’d consider an aftermarket exhaust for my LX but that sounds really good.
@ikariku
2 жыл бұрын
but is $800....I think too expensive.
@JDMz
2 жыл бұрын
@@ikariku worth the money for good quality. Most aftermarket exhausts that are cheap don't last or snap.
@ikariku
2 жыл бұрын
@@JDMz I find one with a great discount in my dealership (U$500), but for my VXL needs to be adapted.
love these videos!! please make more vids on exhausts!!
Nice exhaust
Both sound really good!!!
Thanks, Robot. 🤘
GOOD JOB!
It have better sound than my GSX-S1000 :D
Nice to be like this video great job 👏👏👏🙂🙂👍👍👍👌👌👌
Handy tip to get the sound u want is to drill small holes in the baffle to increase volume little by little. It is a slight mutilation to the baffle but only noticeable if you go in close. On my gilera runner st 200 it was too quiet, baffle out waaaay too loud so I drilled 3 1/2 cm diameter holes and it was perfect. Just upped the volume to my a level I was happy with. To repair if it is too loud is patch on the inside with a little sheet metal.
Do NOT lose the baffle! The screw vibrated out & I lost mine, had to do a sketchy order from Greece; luckily it worked out. Used high-temp red thread lock on new one 2 b permanent. The original screw has a tack weld; once you remove it, the tack breaks and that safeguard is gone.
U look very kind
hi robot whould it be beter for fuel consuption. thanks from london . keep it up really enjoy you videos
Thank u very much from Turkey. I watch your videos. You make it great, by the way do u have any chance to maintaince Yamaha xmax 250cc scooter?
nice!
Yasuni is perfect song on my BV 350 more it is less expensive
hi i have 2017 GTS super 125 with ''IGET'' engine, the radiator out by the exhaust, my question is, will this fit
Does it fit on A Vespa Primavera 50??
My pipe didn't include the anti-seize but it is indicated in the instructions, two actually; one white tube, one black plus a thread sealer. I kind of feel like Charlie Brown on Halloween (rocks in the candy bag), my new 2023 Vespa Sprint 150S that I took delivery of last week had loose mirrors, bubbled floor-rubber strips (not aligned properly, sticking up in places), and the battery tender cable hanging down by more than 4". That was just day one of riding. I'm almost afraid to give it back to my dealer at the 620 mile service now if it'll be the same inept team that assembled my bike. Honolulu, HI.
hi! one question, does the original exhaust pipe is copper? mine needs to be soldered because the welding cracked. thanks
Vespa the best
Thanks for showing the baffle removal! Unrelated question: why do you prefer the Akrapovic to the Malossi pipe?
@croeternal
6 жыл бұрын
Rich Oberdorfer its one of the best on market malossi cant give a water to a akrapovic
Can you also get one for a piaggio liberty to put on ?
Nice video mate
Were did you buy the akrapovic? I want to buy also one for my vespa but i dont know what type of akrapovic it has to be.
what size of muffler do you have to use on VESPA GTS Notte 2018 125cc?
I tried to put on a larger diameter dB eater an stripped screw the under the carbon cab. Now I can’t remove it. Any tips?
👍👍👍👍👍👍👍
nice to meet you. I have a Vespa Sprint 150tft Euro 5. Will the Euro 4 Akropovic be fitted to this vehicle?
Will u ecu adjust to the exhaust or do u need to add models
Hello. On ET 4 150 there will be an 11-inch wheel back?
where do i get those headers??
is it true that its better to upgrade first the variator kit before the exhaust for better performance, and just upgrading ur exhaust only wont make any difference
Ia there akrapovic exhaust for piaggio liberty? What model?
this work for SAM 125??
I Have a Piaggio typhoon 50 cc 4T. will this akra exhaust fit on it?
Is it needed to do P.a.d.s tuning after installing aftermarket exhaust?
I'm just gonna touch it!! Im not gonna lick it! Epic one 🤣🤣🤣🤣
Do you need to remap after changing its muffler?
Awesome video! Trying to drop the exhaust down pipe from a Piaggio MP3 500 Sport but cannot access the two nuts in the same way as this video, even trying to wiggle in from the side. It just doesn’t allow access like shown here. Does anyone have any experience of this and can tell me if I need to remove something to access these two nuts? Pleeeeeease!
I want a Vespa
I want one for my 2023 Vespa Primavera 150. Do you have these in stock? Is this a full exhaust or slip on?
Does it hurt the engine ?
Can it fit on lml scooter
Is it possible to put one on a Beverly 400 hpe thanks .
WIll this fit on a 2013 Vespa Sprint Sport 50cc?
Does the Akropovic Exhaust, actually 'add' power to a GTS 300?
@Flash-xs8rc
4 жыл бұрын
no
Does it works vespa sxl 150?
what size the header ?
Is this can fit to scomadi tt125?
are paiggio x9 125 gd just wanted to now im from england
Do I need to install piggy back in my Vespa Sprint Iget when changing my standard exhaust with this Akra?
@alifnaufal
2 жыл бұрын
yes, you should.
Dose anyone know if this works/ fits on a Vespa et4 125?
@gilerarunner4233
3 жыл бұрын
There are difrents sizes but its a waste off money
Try to review vespa s 125 iget 2020,pls..
The question is why?
Hi, I own a vespa s 150 from 2010 (2valve engine) is there any problem if I install these exhaust to my bike? Thanks
@jesusmejia3910
5 жыл бұрын
I have an 09 150 LX. I was wondering the same thing
Do you have to change your spark plug if you change your exhaust system
@alifnaufal
2 жыл бұрын
in my experience, changing sparkplug with no engine tuning doesn't do much better than the stock setup.
Can it be installed in a Vespa S 50cc?
@S0Und00
4 жыл бұрын
but why
How? For me I can’t remove never
The way he pronounces akrapovič, like bro there's a "č" for a reason it makes a "ch" sound like ch from "CH"ina
maenin kirian aja om biar lebih kenceng
Is this a Vespa 50cc?
So...do you have to pull that off to get the back tire off?
@richarddegen6184
4 жыл бұрын
just muffler and mounting bracket..leave header on
I would like to buy for my primavera red. Ship here in Philippines
Does that fit a vespa sprint 150 notte?
@VespaMotorsport
4 жыл бұрын
This particular exhaust will fit Sprint/Primavera up to 2016, we also sell a version for the newer iGet motor. Thanks!
vespa 50cc?
can I fit 13 inch rims on a GT200 ?
@VespaMotorsport
4 жыл бұрын
We offer these 13" Yorban wheels (originally for Piaggio MP3) that will fit the front of your GT. You'll have to do some modification if you want it on the rear. You'll also need a lower profile tire like a 130/60/13 for the front. www.scooterwest.com/13-yourban-wheel-with-hub-cap-and-mounting-hardware-each.html You can see these in use on our "Vespa Everywhere" scooter: kzread.info/dash/bejne/ZK6Wsc6TadK5iZc.html
Do you need a piggyback for it? I kept hearing rumors (from the local shop) that aftermarket exhausts would screw up the O2 sensor if you went with the stock ECU
@DimasRaihan666
5 жыл бұрын
apa jangan jangan konspirasi orang indo men biar kita beli piggyback 😂
@Farie977
5 жыл бұрын
@@DimasRaihan666 udah dites cuy, sejauh ini ada backfire tapi sensor aman-aman aja Masih pake ECU bawaan btw
@DimasRaihan666
5 жыл бұрын
@@Farie977 gue juga udah beberapa hari pakek knalpot racing ada nembak tapi sedikit ga signifikan. trus nanya ke forum forum malah di takut takutin lambda rusak, padahal kaga napa napa. paling next nambah open looper kalau dibutuhin.
@judevincentfactura1883
4 жыл бұрын
Guys can you translate in English. I'm having that same dilemma..thank you.
@richarddegen6184
4 жыл бұрын
you do not
For sr 150
Why?
Should you up jet if replacing with slip on exhaust?
@exeroo9728
6 жыл бұрын
yes, don't have to but you get a nice liiitle hp gain in the entire rpm range
@richarddegen6184
4 жыл бұрын
this is for fuel injected sprints....no jets
Did you try them on the dyno to see if the pipe makes any HP gains?
@julianc6374
4 жыл бұрын
If u wanted to go fast why would you buy a vespa lmao the fuck
@richarddegen6184
4 жыл бұрын
yes it makes about 10% with a malossi hiflo air filter and malossi multivar vatiator on mine
Can I put one on my Yamaha Zuma fx 50
@VespaMotorsport
4 жыл бұрын
This is specifically designed for the Vespa.
can i install this to sym crox 125 ? if yes where i can buy this kit for acceptable price
How loud would it be with just the header without the muffler? would that be legal?
@user-hv7cp7bp2i
6 жыл бұрын
Carlos Quirindongo
@richarddegen6184
4 жыл бұрын
loud as hell!!!!!
All exhausts are the same size because I have SYM SCOOTER and I do not know if they will work on my own please help
hi boss i have cbf 150 moto and i want original akrepovic Do not disturb anyone want a nice sound. Is it possible ???????????
thinking about it... would be cheaper if I lost 4+ pounds of sprung weight..
Will this work for vespa sxl??
Good evening sir I am a 125cc tyger scooter bike but I want to install one of those muffler and my bike I am in Jamaica
@damionanderson5887
Жыл бұрын
Today I install 1
Is that a 50 CC ?
@gintaraslingis6636
4 жыл бұрын
Yes
@richarddegen6184
4 жыл бұрын
@@gintaraslingis6636 150
Hi, could it be used in Honda Navi?
robot I weigh 300 lbs I have a 150 scooter it doesn't handle very well what should I do first shocks ?
@waynehall8633
7 жыл бұрын
I am 6'8" how much should I weigh
@waynehall8633
7 жыл бұрын
Below Zero. I'm 6'8" tall how much should I weigh?
@tfraupach
6 жыл бұрын
Damn, try riding something bigger...like a Harley.
@Peter-rn5kl
5 жыл бұрын
see if the shocks are adjustable, you can increase preload, or get some new shocks and ned forks / put a stronger spring in them (ik this is kinda late, but i hope it helps )
@richarddegen6184
4 жыл бұрын
go on a diet
Lmfao guy in back @2:48
Can you install this pipe without tuning it?
@VespaMotorsport
4 жыл бұрын
Yes, this is a bolt on pipe. The scooter will automatically adapt to the new exhaust when you start it up. Of course there are aftermarket tuning options you can do to get more out of the pipe.
@STIjojoSTI
4 жыл бұрын
Vespa Motorsport Thats cool thanks!
Does that akrapovic fit on a 50cc Vespa?? Id love to get that on my scooter :)
@Bram-rh3fn
5 жыл бұрын
Yes it will if it is a 4 stroke 2 valve or 4 valve it would fit only if you have a vespa primavera or sprint
where can i get this all parts?
Is the stoke exhaust restricted on the vespa sprint 50? Also, how does the malossi kits improve the performance?
Sorry just wanna ask, what kind of hammer that use for remove the db killer on that akrapovic? Thankyou
Wtf i dont use a exhaust for 700 dollar on a scooter wtff?😥
@hathaway.1166
4 жыл бұрын
FBI These scooters may not be popular in the US, but they are very popular in Europe and Asia,spending 700 bucks for an exhaust is nothing as we would spend more on aftermarket stuff than the scooter itself, please don’t judge people just because they spend big money on an “puny” scooter.
@roberthardwell3916
4 жыл бұрын
in my country, 700 dollars isn't anything when it comes to vespas. Mostly, they modified it fully from top to bottom and the total price is mostly 1000-3000 dollars and some even reach 15000 dollars. its crazy how much they've spent their money to modified vespas
@josepeixoto3384
4 жыл бұрын
@@roberthardwell3916 and they still end up with a pos slow scooter ; why not buy a *real* bike instead of following the herd, is beyond me....
@tobiasbjorvik6005
3 жыл бұрын
Alan Golden no
@fintonmainz7845
Жыл бұрын
@@josepeixoto3384 The herd follower is yourself. I'm not surprised it's "beyond" you.
I'm here just for the sound
Doesn’t damage the engine without the catalyst converter?
@richarddegen6184
4 жыл бұрын
@JonathanPlays fuck the environment