Great job🎉

@RentThisFlipThat

Жыл бұрын

Thank you!

good job!

@RentThisFlipThat

Жыл бұрын

Thank you 👊

I've never seen drywall behind a shower,but to be fair Ive seen these shower panels installed direct to studs...so I guess they're totally waterproof and if caulked correctly at the seam you shouldn't ever need to worry about them leaking. Does Allen Roth require a water proof backer board? Thanks for the vid!

What shower base did y’all use?

I bought an Allen/Roth shower wall system and I have no instructions in the box so this is very helpful. What did you use to caulk the seams with?

@RentThisFlipThat

8 ай бұрын

Bathroom shower caulk made for that purpose. I think it's a tub and tile caulk. Hope that helps. Thanks for the question

What did you use in the corners?

Looks great, what type of tape did you use again?

@RentThisFlipThat

10 ай бұрын

It double stick tape and it come with the shower kit. Hope that helps. Thanks for the question

@joani2732

10 ай бұрын

@@RentThisFlipThat thanks for your reply I will be ordering the kit soon. Wish me luck.

I guess I missed you removing the paper from the double-sided tape on the first panel you installed??

Had this installed in July. Exact same insert. My shower curtain keeps falling down (tension rod). Is it safe to drill through to secure the shower rod? What type of bit will I need? TIA for your response.

@RentThisFlipThat

7 ай бұрын

As high up as the rod will be, I think it would be fine. Might seal it up with a little silicone to keep out the water. Hope that helps. Thanks for the question

How did you know where to cut the faucet openings?

@RentThisFlipThat

6 ай бұрын

At 25:36 in the video you can see that I am measuring from my plum line I made with my level. Then I pulled from there to the center of pipes and from the bottom panel the middle of the pipes. Hope that helps. Thanks for the question

Did you fit the shower wall directly to the base or was there a small gap for expansion?

@RentThisFlipThat

6 ай бұрын

There was a very tiny gap, but for the most part, we cut it to custom fit then sealed it up with 100%silicone. Hope that helps. Thanks for the question

Did i miss thw part where you put up green board not regular drywall???

@RentThisFlipThat

3 ай бұрын

I think so.It starts at 7:48 In the video if it looks like it is gray it is not it is actually greenboard. Thanks for the question

Does the allen and roth has niches for soap and shampoo bottles or not?

@RentThisFlipThat

4 ай бұрын

No, but we bought some separate to install

@elmermt

4 ай бұрын

@@RentThisFlipThat send the link and show me the last results.

I've been estimating and installing systems for 35 years. DON'T put a SMALL angle on a grab bar. It defeats the purpose of the slant and looks like the installer was drunk and the owner was stupid. Your plumbing receptacle for hot and cold is called your "tree". One more, Put Gypsum for the wall NOT drywall. Gypsum is mold resistant and stronger, then you don't need blocking for grab bars either, better code, longer lasting.

@RentThisFlipThat

10 ай бұрын

These are all very good tips. Thanks for sharing your knowledge. Never too old to learn something 👍👊

@mikerademaker9711

8 ай бұрын

No blocking for grab bars? You really want someone pulling them self up with someone fastened to drywall only?

@RentThisFlipThat

8 ай бұрын

Dude you clearly didn't watch the whole video. If you did you would see starting at 6:45 in the video thatvblocked for the grab bars and explained why we are blocking. You're comment makes no sense based on that. But thanks for the veiw.

@mikerademaker9711

8 ай бұрын

@@RentThisFlipThat I did see that. I was responding to johnsmind's comments.

@RentThisFlipThat

8 ай бұрын

Makes sense now. Thanks for the comment

The shower panels are supposed to be installed over hardy backer not over drywall

@RentThisFlipThat

3 ай бұрын

No they aren't. Read The instructions

@katvacuum7510

2 ай бұрын

Maybe you should read the instruction’s before posting an ignorant comment.