Installing a KB Voodoo Bed Rack on a Bakflip MX4 Tonneau Cover Tacoma
Тәжірибелік нұсқаулар және стиль
Here I demonstrate the installation of my new KB voodoo 14" Aluminum Bed Rack. This is the short 48" bed version. My bed cover is a Bakflip MX4 tonneau Cover.
Follow my build on Instagram
IG @ Project_Onix
Where to buy:
KB Voodoo 14" Aluminum (Short Bed 48")
www.max-modular.com/
BAKFLIP MX4
www.bakindustries.com
.
.
.
.
#Dirty5s #35s #tacoma #toyota #kingssuspension #Icons #deltajoints #trd #coopertires #truck #goexplore #getoutdoors #offroading #wheeling #overlandingtrdoffroad #Tacomaworld #toyotatruck #toyotalove #toyotatacoma #mallcrawlers #rockcrawler #adventure #tacomalife #bedrack #tonneaucover #projects #project #diy
Пікірлер: 91
*I drove 20 hours across state with a **Latest.Bike** on this rack never budged. Highly impressed. Easy install one two go!*
Can you open the tonneau cover with the rack on?
@Matt.Gillard
2 жыл бұрын
The one thing I came here to see and he doesn't lift the cover under the rack 😭
@thebeattee569
2 жыл бұрын
In for the answer also
@jonmilstein373
2 жыл бұрын
EXACTLY what I was wanting to know!
@hsnester
Жыл бұрын
Definitely can’t. Lol.
@sneakyjoe12
9 күн бұрын
They have a higher rack but i don't think that 14" will allow the tri fold to clear
Very EFFECTIVE
That looks sick
Los felicito, un muy buen video, un abrazo desde Perú.
can you open the trifold with the rack fully asembled?
The most important info is missing! Cannyou open the tonneau or not?
Saw that you had a third bar added to your RTT does that help with distributing the weight or increasing the weight the rack can handle?
So I just bought the hi rise bars from voodoo and have the Bakflip g2. I got the brackets which are beefer than the ones you have. Did you have to shave any of the plastic black inside rail on the truck at all so that the silver Bakflip relocator brackets fit? Tough to explain, sorry. It the seal still good or do you have any leaks? Seeams like it is going to be a really tight fit with these brackets for the tri fold to close.
Very nice dude! How are you liking the the setup after having it for a while?
Thanks for the upload. Are you happy with his setup? Seems like this is the only crossbar setup I can find that you can use with a folding tonneau cover. My only gripe is how much the brackets stick out when the rails are removed, a lower profile would be perfect. Do you know of any other companys making similar products?
@ProjectOnix
5 жыл бұрын
I'm pretty happy with this setup. It rains a lot where I live. I find this useful to my everyday. I don't know any other companies that does this. The brackets does stick out but it also gives me an extra 2 inchs of height. Hope this helps
Hi, Are T-slot nuts needed to bolt the brackets unto the Tacoma bed rail? If so, which one's did you buy?
Can you still open the bakflip all the way with that rack?
Hi. Any issues to report since you installed? I have about 500 lbs to put on top of this rack with the the same BAKFlip cover you have.
How's the aluminum rack holding up? Debating between the steel and aluminum one. Any visible cracks anywhere?
Good video and finally…the kinda rack I’d like to see matched with the MX4. Do you know if they make this for F150’s? Thanks.
What is the height from the bed liner to the bottom of the rack in the middle? I wanna know if I’d be able to tuck two recreational kayaks in there.
Subbed
Did you ever trim the backflip base to accommodate the side of the kb voodoo brackets?
Can the Bakflip still be folded all the way to the window w/ the bedrack on?
Does the cover still fold back under the rack?
Do you think that the 18” rack would provide enough clearance to open up another fold of the Bakflip? Is it the width or height of the rack preventing further opening?
@ProjectOnix
5 жыл бұрын
I haven't seen anyone with a 18" and a Bakflip yet. That may be possibility.
So does the Bakflip still open with the rack in place? You don't show the tonneau cover in the open position
Now with the brackets does the rated Capacity of the dynamic and static change.
@ProjectOnix
5 жыл бұрын
I believe not by much. I recommend getting bed stiffiners brackets
Where can i get that relocating bracket, im trying to do the same thing without getting rid of my trifold.
Will those brackets hold a rooftop tent with 2-3 people in it?
Nice video, what gun case is that mounted to your roof rack?
@ProjectOnix
5 жыл бұрын
Thanks! Plano tactical case 👍
Can you open the bakflip tonneau with rack installed?
Any water enter the bed with the brackets?
what happened to the spare tire mount video ?
Can you still open your bakflip with the rack on? I would get one that would make everything functional
@burnsbrigade
Жыл бұрын
he ever answer these questions?
@Dodger4life99
Жыл бұрын
I have the same question
@normcharloff4742
Жыл бұрын
This is bogas, if anyone can show the backflip open we are interested
@shaolin224
Жыл бұрын
@@burnsbrigade no reply so far
Can you still open the tonneau properly ? Thanks
You think that setup would make your prinsu flush with with prinsu top rack over the voodoo?
@ProjectOnix
5 жыл бұрын
It's not 100% flush. But with a spare tire or rtt looks great with it
How is the stability of it. Seems like the bends and screws may be the week points. Do you know what the static limit is?
@matthewvigil891
3 жыл бұрын
The static load is listed as 600lbs on their website.
Does the tonneau cover opens still?
I have a ultraflex trifold tonneau cover. What brackets do i need so i can do the same set up as yours? My factory railings are already used by the cover
@safemoneymatt
2 жыл бұрын
Did you ever figure this out? I don't have the relocated railings either
Did the OEM rail relocation kit come with your order? was it a separate option?
@ProjectOnix
5 жыл бұрын
Separate order.
@aamstutz69
5 жыл бұрын
Do you happen to have the link for the rail relocation kit? I looked on Voodoo's website and I didn't have any luck finding it.
@ProjectOnix
5 жыл бұрын
@@aamstutz69 it should be on there. Don't use the drop down. Go to the extras sections. You will see the bakflip relocation bracket
Do you get water leakage in your truck bed with the adapter brackets?
@ProjectOnix
5 жыл бұрын
Very little. Nothing major.
Can your mx4 open with the rack on?
@911sc1981
4 жыл бұрын
Can you respond to this question? Thanks!
@JYeungTV
4 жыл бұрын
@@911sc1981 yes and no. No for tri-folds because the height clearance doesn't allow it. when opening you'd need a foot or more of a clearence to open. Though from my research my OEM tonneau cover sits underneath the KB voodoo tonneau cover addon which does not allow it to open. IMO though Its sort of like having two spaces. One inside the truck bed and then on top of the truck bed. Though if you have a roll up or one of those fancy electronic sliders then yes
Really wish you would have opened the tonnue cover lol
Hi, with the rack mounted can you open the bed cover fold and unfold?
Do u talk to customer service regarding on your bracket?
@ProjectOnix
5 жыл бұрын
I've emailed him back and forth. No issues. He was very helpful.
Are you able to open the backflip with the bed rack installed?
@ProjectOnix
5 жыл бұрын
Unfortunately no. But it keeps everything safe and dry from the elements
@ColtenJuliana
4 жыл бұрын
Project Onix my question would be if you’re able to flip your bakflip to the 3rd panel (the fold before it leans on the truck) and then install the bed rack, or does the Height of the folded portion interfere with the angled bed rack arms. Thank in advance!
@ProjectOnix
4 жыл бұрын
@@ColtenJuliana unfortunately it does interfere with the rack. I would recommend looking at the retrax pull system bed covers. 👍
any issues since the install, any bending on the brackets?
@MiltonSOrellana
3 жыл бұрын
So any issues with the brackets so far?
Any update??
Do they make it for tundras??
@ProjectOnix
5 жыл бұрын
They do 👍
Hi there, can you do a follow up video with the roof top tent on it pls? I would love to know if this 14” rack gives enough room in the bed to pack a lot of gear or “18 is better. Thnx
@joestriker2100
4 жыл бұрын
Follow up would be great. maybe a 1 year later.
i like how you showed how this turned out. I didnt know that the brackets replace the ones that came with the bakflip. Very nice how bad does it leak tho?
@ProjectOnix
5 жыл бұрын
Thanks! Leak isn't that bad. Only a little here and there. 👍
How is the visibility throught the rear window?
@ProjectOnix
5 жыл бұрын
Clear! 👍 The relocation bracket gives it an extra 2 inches of height. It's perfect
I can see only on website is short bed 46” long and long bed 58” but yours 48”?
@ProjectOnix
5 жыл бұрын
correct. I have a short bed tacoma
Are you able to open the bakflip still?
@ProjectOnix
5 жыл бұрын
Just first unfold of it. Unfortunately not the whole thing. I still like it because it protects it from the outside elements. It rains a lot where I live.
@pinay56
5 жыл бұрын
@@ProjectOnix: So it doesn't work... How can anyone say that this really works when all you have is 1/3rd that actually flips backward....
@ProjectOnix
5 жыл бұрын
@@pinay56 I never said the flip cover will work. Where I live it rains a lot. The bed cover helps protects it. If you go with the retrax system it will work. 👍
Camera very hard to follow so shaky I fast forward the video get away from the dizziness
tonneau cover will not open
But you can't open the cover. So you have to take off the rack to open it. That's stupid.
Wow..this is bad design especially for an off-road use. Only 4 bolts and especially the 4 flimsy L brackets at the support bases. A square tubing at the base would provide much better support than the L brackets.
That's nice; but you don't have the film on how all of this works, and for some who would like this setup, it would be helpful if you could demonstrate how the BakFlip works with the Voodoo rack installed. For all we know, you could be blowing smoke up our asses, and we all have to depend on your say so that it works......