This is a short(ish) video on installing a 3.5" suspension lift kit on a JKU. This is NOT meant to be a step-by-step or exhaustive by ANY means but rather a primer on what's all involved.
There was a Teraflex 2.5" ST2 suspension lift kit on this Jeep prior, you'll see some of those components that we remove or reuse.
Please read your directions, get some knowledgeable friends, and a good set of tools, or just find a pro in your area that can do it for you. :)
0:00 Introduction and safety
0:24 Walkaround and parts
1:13 Plan of attack
2:16 Front Sway Bar Disco
2:35 Disco shocks
2:53 Remove factory trackbar
3:20 Drop front axle
3:41 Prepare to remove UCA
4:06 Remove LCA
4:20 Remove springs
4:43 Bump stop extensions
5:10 Coil springs
5:30 Remove UCA
5:55 Install UCA
7:00 Install LCA
7:38 Install passenger UCA
7:57 Install passenger LCA
8:57 Install track bar
10:19 Attach shocks
10:35 Sway bar disconnects
10:54 Mount and torque wheels
11:13 Final check on the front
11:54 Rear sway bar fight
13:50 Disconnect shocks
14:24 Remove trackbar
14:58 Rear sway bar links
15:09 Emergency brake harness
15:31 Dropping rear axle
15:57 Remove spring retainers
16:05 Remove springs
16:19 Install new springs
16:37 Remove UCA and LCA
17:00 Remove track bar relo bracket
17:21 Install new track bar relo bracket
17:44 Install UCA and LCA
18:41 Reconnect shocks and raise axle
18:58 Outro