This is a MUST HAVE modification for your Zero 10X. Without this damper the front end is a mess.

@MrFas4wd

2 жыл бұрын

Yes. It is but don’t buy it from Falcon. The trash they send you falls apart at the most critical point. There’s no after care or help from them either. Empty promises , ignoring you and expect to get banned from the telegram group if you bring up anything untoward about them.

You sell two types of this steering dampers for the zero10x do they work properly with the 10x with no Size issues? And what's the difference between the stock (245mm) and matris (330mm) is it bigger turning radius for the handlebar?

I have the x-tron x10, model similar to the zero 10x but it does not have a thing, the 2 holes that are on the fork in front, how do I do, do you have any ideas?

How do you change the oil? Mine open up and the oil spilled everywhere. Also what type of oil do you use? Thank you

I want a damper for my Vsett8 but this seems clunky and even adds a hazard with the way its jousting out front and on the side?? Waiting for the 2.0 versions.....

Is it possible to install same sistem on Zero 10? simple not 10X

@FalconpevSg

3 жыл бұрын

Thiefyo does not fit the 10

@Thiefyo

3 жыл бұрын

@@FalconpevSg Any palns for that model? :)

@FalconpevSg

3 жыл бұрын

@@Thiefyo here you go www.falconpev.com.sg/products/zero-11x-steering-damper-kit?_pos=1&_sid=2f1445a62&_ss=r

is this 340mm long rod damper?

hi sir ,, that nice ,, is itvfit on kaabo mantis 8 ? i wish it will be ? so i can purchase it thank you sir

I got a defective mount for my damper,the bracket that connects to the scooter is machined on the opposite side

@FalconpevSg

3 жыл бұрын

YITIVITY do go through our proper Channel to report any issues. Please email sales@falconpev.com.sg

What the video didn't mention was to remove the M5 grub screws from either side of the steering head before fitting the bracket.

@FalconpevSg

3 жыл бұрын

arghh, yes...we missed that out, thank you!

@thetruthwillsetyoufree5677

3 жыл бұрын

Yes. That's screwed me up big time. What an important thing to forget!

@kevinfitzmaurice2334

3 жыл бұрын

Thanks for pointing that out! I did a test fit and was concerned. I’ll remove the grub screws now. 👍🏻

do you sell a damper that will fit my kugoo g2 pro please my friend 🙏

Can this fit for solar r1 scooter?

@FalconpevSg

2 жыл бұрын

Sorry not sure

It should be said that there are two set screws in the neck that need to be removed before installing. Messed my install up big time. Also a lot of safety is dependent on those two very small screws. Very bad design.

@FalconpevSg

3 жыл бұрын

yes we missed out the part about taking out the set screws. Sorry about that.

@Jasonlee1278

3 жыл бұрын

@@FalconpevSg i would redo the video to include all the steps because most people will just skip ahead.

@Clipper_Dames

3 жыл бұрын

How do I take those screws out?

WHY MAKE A DAMPER ON THE LEFT , WHERE THE FOOT WILL INTERFERE !!!

@FalconpevSg

3 жыл бұрын

SAMU left or right the damper will interfere. Anyway the damper can be installed on any side.

WHAT'S THE PURPOSE THAT....THE VIDEO IT'S SHORT CAN YOU DEMONSTRATION ACTUAL WE ALL SEE THAT

@FalconpevSg

3 жыл бұрын

To stabilise your scooter at high speed and to prevent wobble

Looks dangerous.