Where can I find the product key? You say you'll talk about how to activate in another video - what video is that please? The time code would be great also

@LaserEverything

4 ай бұрын

I totally forgot to include this in my follow up videos. I will have to make another where we discuss it. For now, I have been using this website for license keys for a very, very long time. I've never had an issue. I recommend it highly as a trusted source: www.productkeys.com/?s=windows+10&post_type=product&product_cat=0 Most of these keys are resold corporate licenses, which is fine, but they can expire after a few years now and again. When it does, you simply buy a new one for another $10. Great resource as long as you understand what you are getting. This has been my personal activation method for as long as I can remember.

Thanks Mate, I've been in a marathon with this Windows 10 install for three whole days. Watched endless KZread videos, gone through forums-yet it still eluded me. You're my life saver.

@sebastianestrada1311

Ай бұрын

use parallels windows 11 works incredible

Thank you so much man! Precious tips, helped me a lot!

Thanks a lot without your help i never could do this! Great explained!

You know i never comment anyware, this is one of my first comments. I want to thank you for this tutorial because this has been a headache on how to find a vm that would run on a m1 mac. Thank you very much!

@LaserEverything

9 ай бұрын

So glad it was helpful!!

@IreneShams

5 ай бұрын

@LaserEverything Absolutely same here; thank you so much, also for explaining so well each step! 🙏

@LaserEverything

4 ай бұрын

Glad it helped!

Another episode. How great❤

@LaserEverything

Жыл бұрын

We've been busy! Cranking em out now!

Thank you! UTM's own instructions got me nowhere, but this way worked on the first try on my M3 Pro MBP. Slooooow, but it works. (I think the things that made the difference were in the few VM settings you tweaked, and the use of the ISO downloaded from Microsoft rather than the one downloaded with CrystalFetch.) Thank you!!

thank you so much this was very helpful and it works great!

@LaserEverything

5 ай бұрын

Glad it helped!

Thanks man!! I was unable to do it in my M2 Mackbook until I see your video!

@LaserEverything

4 ай бұрын

Glad I could help! Hope it's running alright for ya!

Man, I've been sweating over this to get an emulator to work on M2, until I saw this video! Thanks!

@LaserEverything

5 ай бұрын

Glad I could help!

Best video i ever seen in youtube very good video keep it up bro i support you

@LaserEverything

Ай бұрын

Thank you so much 😀

Nice video! Thnaks

Muchisimas gracias amigo. Funciono de maravilla, tardado si, pero estamos al 100 😊

@LaserEverything

4 ай бұрын

Gracias!

if anyone faced this window (UEFI Interactive Shell v2.2) here is the solution ,, Before this Window appears, the message (press any key to boot from CD or DVD) is shown for a few seconds. Press any Key as long as that message is shown and Windows Installation will start. it will take 2-5 minutes to set up then.

@HoangNguyen-yd4nh

8 ай бұрын

thanks

@edwardspianojoural

8 ай бұрын

You saved my life! Thanks!

@horsemouthjones9060

Ай бұрын

Thanks . was beginning to think I did something wrong

@Slashingthrough

11 күн бұрын

I go directly into the interactive shell ... can't do anything there

Best solution. I had to use win10 for sql server. Other options were not suitable for me. Thank you for sharing this...

@LaserEverything

4 ай бұрын

Glad to hear that, SQL is a good use case for this implementation.

Thanks a lot bro I have tried everything from last 2 week nothing work but your video worked thank al loot ❤❤❤❤❤❤

@LaserEverything

8 ай бұрын

Glad I could help

Great job Emulation learns and maintains a library, Windows runs faster each time you run it till there's nothing left to learn, you can keep doing an install a few times to optimize After a few installs go ahead and benchmark, that's something to have on your channel Thanks for the vid

@LaserEverything

4 ай бұрын

Cool definitely worth trying out and comparing!

Amazing thanks

@LaserEverything

4 ай бұрын

You got it!

Great Tutorial. Thanks

@LaserEverything

4 ай бұрын

Glad it was helpful!

its amazing thanks a lot

Thank you for the detailed instruction. Can Windows installed on Ext HDD or USB drive?

this is of help.. thanks

@LaserEverything

7 ай бұрын

Thanks for watching!

Thank you

Thank you ❤

@LaserEverything

5 ай бұрын

Thanks for watching!

Hey man, This is really fascinating. Actually am planning to purchase Mac Mini. I like to run 2 emulated OS simultaneously. Do you think M2 with 16 GB RAM and 256 GB SSD can do that? In my windows laptop I can run two virtual machine simultaneously but in Mac I need to emulate those architecture so am confuse. But I heard mac have good RAM management so I guess it should work. But still I like to hear from you. Am thinking to save few bucks in storage by not going for 512 GB SSD and will buy external SSD and store those emulate virtual machines in SSD. For more content, I need to emulate architecture for malware analysis and vulnerability research. Please share your views.

Really good walk through. I have used VMs for decades. Never ran a MAC though.

@LaserEverything

Жыл бұрын

It's a specific solution for a specific problem for specific people, but it works. This won't be our biggest hit series ever but it'll really help some people.

@WeatherKannon

6 ай бұрын

@@LaserEverythingpeople like me!

@LaserEverything

4 ай бұрын

Whoo!

Thank you! Everything is working fine. Quick question: is there any way to remove the "press any key to boot from cd..." when booting up?

@LaserEverything

4 ай бұрын

Covered in part 2, just published: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=blveYCmYc4Si7lnB

Thank you boss

@LaserEverything

4 ай бұрын

No problem

how well does installing hardware work with UTM?? have you tried installing drivers alongside hardware?? love to know whether older hardware can be utilised via utm cheeRs

@LaserEverything

5 ай бұрын

I've tested UTM with hardware drivers successfully so far. Unless you're doing something funky or uncommon it should actually work fairly well.

Thank you for your video. It works on my Macbook Air M2. But I am just curious that we downloaded Ezcad_2_Community_Edition and Ezcad_2_64_Drivers for? Can I delete them after Win 10 works ?

@LaserEverything

4 ай бұрын

The context around that portion is for our user base who wants to run ezcad2 on their mac for setup or tuning purposes for their laser. If you’re following along just for getting windows running but not using a laser, you won’t need those :)

Hey! Im having a hard time. After completing the user profile and doing security questions, it puts me in a loop of redoing my region, keyboard, and then the profile again. Im on my third loop and it doesnt let me reuse the prior loop's username, so if I keep doing the loop I'm going to run out of user name ideas. Any suggestions?

I’m looking to install windows 10 on a MacBook m1 to run a piece of audio hardware that will not run with macOS or windows 11. Could this be a viable solution? I have to install drivers for this also

if you still have iso image, every time when you will run windows, it will load setup windows, that is why do not forget to clear the iso CD/DVD

@LaserEverything

4 ай бұрын

Thanks, yes! We just covered that in part 2, just published, here: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=blveYCmYc4Si7lnB

Everything is fine on my macbook air M1 2021, although it consumes battery, takes a long time and gets quite hot but everything is fine. I have a question, once done, can I click "clear" in the CD/DVD and then delete the ISO file to save space? Thank you for this very helpful video!!!

@LaserEverything

4 ай бұрын

Yes absolutely, we talk about it a bit more in part 2, just published, here: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=blveYCmYc4Si7lnB

Hi I have a problem. When I right click on the utmost Windows 10 there is only the option Show in Finder and not the Edit. Can you help me?

do you think fl studio will work on that?

شكرا انا من متابعيك

@LaserEverything

Жыл бұрын

You are welcome!

Hi. My box for Spice Guest did not appear. You mentioned it would be on the CD in explorer. Can you tell me where specifically please as I do not want to mess up after that mammoth instal of Windows. Thanks.

@LaserEverything

4 ай бұрын

Check your virtual drives in the VM's Properties area. Each drive should have a drop down, one just may be mis-clicked to empty.

Hi! Thanks for your video. I have a problem and don’t know if you could help me. Once I hit the playbutton and play windows and hit the key I get a message that says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:” Do you know where I could have gone wrong? Best.

@LaserEverything

4 ай бұрын

Something in your VM Properties was changed after the OS finished installing. Could be anything from the amount or type of RAM to the type of processor or number of cores you are emulating. My recommendation would be to reinstall and make sure those properties remain unchanged after setup is complete.

compare with using docker, pls :)😁

Can you help me? I followed everything step by step with the video and when I finished installing Windows immediately after the reboot, it asks me to Intsall again. Im on MAC M3 Pro

26:36 the window extended and now I have a grey screen and idk what to do

Couldn’t you just use light burn for Mac? Maybe a driver issue still exists. Another option might be wine/crossover. All of these option would provide better performance (if they work at all).

@LaserEverything

9 ай бұрын

You could certainly. The main reason in my mind is to perform lens corrections with corfile if you don't have access to a Windows computer so don't have to do them manually on LightBurn. Additionally some automation features in ez2 aren't yet supported in LightBurn and ez3 boards aren't supported at all.

hello, I can not start even with the first step because the page where it is supposed to be the Ezcad software does not exist anymore: Error 404. Can you help me with that please?

Would this run AutoCAD well or would it be too slow?

@itskweegee

10 ай бұрын

Forget about anything that needs 3D acceleration, UTM emulation does not support that.

On an M series Mac you could install Windows on ARM and it will virtualize and run quite a bit quicker. It will still run x86 based apps using the Windows ARM translator (like how the Mseries Macs use Rosetta 2 to run intel apps on M). Did you try this for your M1 MacBook Pro? Works quite quickly and smoothly on mine.

@LaserEverything

Жыл бұрын

Windows on ARM is fine but Ezcad 2 will require x86 drivers to function and those are incompatible with Windows on ARM, thus for most of our viewerbase this method will be necessary for Apple Silicon.

@briangates8853

8 ай бұрын

i tried parallels originally and ran into that with usb drivers for a software i use... so trying utm out@@LaserEverything

@aaliade1

5 ай бұрын

Is it possible to share the link for the Windows 10 ISO that you used? I can only find a proper ARM version for Windows 11

@briangates8853

5 ай бұрын

@@aaliade1 I used parallels to install windows 11 on my MacBook Pro M2

@LaserEverything

4 ай бұрын

You can use the Installation Media Tool to generate an ISO file that meets your requirements, there is more info in the FAQ on this page where the tool is downloadable. Link: www.microsoft.com/en-us/software-download/windows10

Retina mode is nice for better resolution

@LaserEverything

4 ай бұрын

If you can afford the overhead in processing absolutely 🤩

will this work with "windows server 2022" as well?

followed your video exactly, i get "Recovery, your PC/Device needs to be repaired" :( M2 macbook air. Thanks for the video though. Appreciate it. I have to figure this out now.

@nikwashburn9099

10 ай бұрын

yep same lmk if u figured it out

@jbaldwinLIFE

10 ай бұрын

Me too :( :( "The operating system couldn't be loaded because the digital signature of a file or one of its dependencies couldn't be verified. File: \Windows \System32\drivers\vioscsi,sys Error code: Oxc0000428"

@abbashussain1296

9 ай бұрын

got the same error

@ivanyursek3661

9 ай бұрын

@@jbaldwinLIFE The same happened to me. In the UTM main screen, Right-click the Windows instance and select Edit. Next, go to QEMU and un-check the box that reads "TPM 2.0 Device". That's it.

@ivanyursek3661

9 ай бұрын

@@abbashussain1296 The same happened to me. In the UTM main screen, Right-click the Windows instance and select Edit. Next, go to QEMU and un-check the box that reads "TPM 2.0 Device". That's it.

when you said press a keys that utm can boot I'm not sure what to press

It doesn’t allow me to click the windows 10 ISO ☹️ I’ve been at this for days. What can I do

Ezcad Software is not found with 404 not found... What should I do?

при окончании установки я ничего не нажимаю когда компьютор перезагружается. но установка начинается опять заново. что делать?

It will go into Shell for me only even if I click any key when promoting to do so.

Nice Video . Were is part 2?

@LaserEverything

5 ай бұрын

Coming soon

@LaserEverything

4 ай бұрын

kzread.info/dash/bejne/oqd-x7dscbS-eLw.html

Does AutoCad works with the windows version en MacBook Air?

@LaserEverything

6 ай бұрын

The emulation is already VERY slow. I wouldn't expect AutoCad to run at anything close to an acceptable speed.

When I do it step by step as u do it will run but it won't connect to the internet? Do u know what I can do? I tried any things such as reinstall, reset IP configs but nothing seems to work

@sukurov.6337

11 күн бұрын

Go to settings, then to the network and make it bridged(advanced)

Que equipo necesito para hacer esto y que valla fluido??

for some reason whenever I finish setting up and making my account, it stops at some point or another, sometimes after opening Microsoft edge, sometimes immediately after setting up, it will restart and we're back at the beginning. Edit: I figured it out, I was continuing to press buttons after restarting look a goof

I followed all steps .. installed windows 10 in my Mac M1.. installed guest tool everything. Internet is not working inside the windows 10 ... what to do ?

@LaserEverything

4 ай бұрын

Check the "Network" settings inside the Windows 10 VM "Properties" section. There should be a few options in there to play with to get the network passthrough working. That's where I would start.

I keep on getting stuck on the Yellow Shell page so I turned off UE Boot but now it says there is no disk to boot. Any suggestions?

@rakeshraysim73

4 ай бұрын

same here, any solutions??

@rubyyb

4 ай бұрын

@@rakeshraysim73didn’t end up working for me so found videos on windows 11 and worked it well hope this helps

This didn't work for me.

what do you mean by “emulating” the processor?

@LaserEverything

4 ай бұрын

Emulating means rather than using the computers ARM processor to execute x86 instructions (which it can't do) - it literally creates a virtual processor to execute the instructions instead. It's an extremely resource intensive translator.

Any idea if this will work on an MacBook Pro m3Pro ? Thanks

@fancythanos9917

5 ай бұрын

i am using m3 and i am figuring it out if it works

@oaw2780

4 ай бұрын

@@fancythanos9917 let me know if it does, because I have an M3 Pro and my vm gets stuck in the "Why did my PC restart?" loop and the guides to fix it aren't working for me.

@fancythanos9917

4 ай бұрын

​@@oaw2780 it does work, its just it get stucks with the powershell. All you need to do is spam a key once it starts up

I got this error (QEMU error: QEMU exited from an error: qemu-x86_64-softmmu: -drive if=none,media=cdrom,id=driveA8ECAB32-76C7-4900-8109-01F765853DEC,file=/Users/Akram/Downloads/windows system/Win10_22H2_English_x64v1.iso,readonly=on: Failed to lock byte 100) how can I solve it?

@arjaycastillas7087

3 ай бұрын

same issue did you solve this?

@saad2602

3 ай бұрын

@@arjaycastillas7087 same did you solve it?

@silidox3440

3 ай бұрын

same issue any way to solve it?

when it boots up it says recovery

@berkaykurkcu

8 ай бұрын

same here. Restarts on itself, tells "we think this will be solved with update", just a moment spins for a few minutes and cycle repeats.

Hello, It worked for me but when my processor is like 100% everytime without doing anything. I checked speeds and each processeur clocks at 1Ghz. Is that normal ? Do I have to change something ?

@LaserEverything

Жыл бұрын

Hey there, I'm not an expert at this by any means. Kind of figuring it out as I go along as well but I might try a different QEMU processor. There's another x64 variant at the very bottom of the processor list. Perhaps that might make a difference.

This program can only installed on version of window designed for the following architecture x64 HOW TO SOLVE THIS PROBLEM PLS HELPP😢😭

@LaserEverything

4 ай бұрын

If you are getting this message the program you're trying to install is 64-bit and you've installed a 32-bit version of windows. Check your processor settings, make sure you're emulating a 64-bit processor and make sure your copy of windows you're installing is a 64-bit version of windows.

Fail on install for me: 12:08 after press any key Yellow Words with Mapping Table and ends up with a Shell> in yellow prompt Ideas?

@Rayan_elg

6 ай бұрын

Someone said to turn off UEFI boot, fixed the issue for me

@rubyyb

6 ай бұрын

​@@Rayan_elg I keep on getting stuck on the Yellow Shell page so I turned off UE Boot but now it says there is no disk to boot. Any suggestions?

@rubyyb

6 ай бұрын

keep on getting stuck on the Yellow Shell page so I turned off UE Boot but now it says there is no disk to boot. Any suggestions?

im stuck on "UEFI Interactive Shell v2.2"

@mohammedtime2701

9 ай бұрын

Turn off UEFI boot please.

@rubyyb

6 ай бұрын

keep on getting stuck on the Yellow Shell page so I turned off UE Boot but now it says there is no disk to boot. Any suggestions?

@mohammedtime2701

6 ай бұрын

@@rubyyb no thank you

@rubyyb

6 ай бұрын

@@mohammedtime2701 lmfao

The follow up video ??

@LaserEverything

5 ай бұрын

Coming soon

So how am i gonna open the windows again after shutting it down?

@LaserEverything

6 ай бұрын

Simply running UTM again and selecting the OS will "reboot" the "computer"

it asks for a product key

Is this possible on a M1 MacBook Air ?

@LaserEverything

6 ай бұрын

It should but I haven't tested it so results/settings may vary. Process SHOULD be the same though.

Too slow :( How to upgrade clock speed on windows

You guy’s probably have enough videos edited or not to upload everyday for at least 3 months out

@LaserEverything

Жыл бұрын

lmao I edited this this morning 🤣

If this works, I'll drop parallels. I am a programmer and my libraries are making weird stuff like windows x64 arm

@sergisanchezgonzalez5919

6 ай бұрын

hey, did it work?

@user-vz7tt6tf7x

5 ай бұрын

hey, did it work?

@bennyswayofficial

5 ай бұрын

@@sergisanchezgonzalez5919 notifications came in handy. So it worked but I have to point out. I use Gradle to make my builds and spinning up the packageDistributionRelease was a pain. I crashed almost everytime, but running a project (dev/release) worked okay. I had a 16gb ram M2 Mac 13" touchbar 2022 version. I tested it as well on a 2018 MacBook Air 4gb. That's Intel and all ran without crashes. So just know his configuration is correct but architecture emulation might not handle heavy IO processes

@bennyswayofficial

4 ай бұрын

yes it did. be warned on the cpu, I use gradle and it did not love it. @@user-vz7tt6tf7x

@LaserEverything

4 ай бұрын

Hope it works out for ya!

It was completely done but how do I boot to Windows?

@LaserEverything

4 ай бұрын

This is a virtual machine so it must run inside of MacOS. For an example see part 2, just published, here: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=lwfJZaKJT46-8qtO

How can I emulate intel processor? instead of ARM CPU

It’s still super super slow even after I’ve downloaded windows 10, is this normal? 😭

@LaserEverything

5 ай бұрын

Yes, unfortunately that is a characteristic of emulation. 😬

How do i switch between Windows and os?

@LaserEverything

4 ай бұрын

Since the VM runs as a windowed application on MacOS you don't really have to switch back and forth. It's more like both are running simultaneously. You can watch part 2 for an example here: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=blveYCmYc4Si7lnB

@juwonwilson3199

4 ай бұрын

@@LaserEverything thank you boss

Will this work with Windows Server 2022?

@LaserEverything

4 ай бұрын

It certainly could as long as your system can afford the overhead demand.

@AshwinSKumar

4 ай бұрын

@@LaserEverything okay

Where’s the windows activation video

@trguh6914

8 ай бұрын

You buy that shit tf you mean

mine so slow

whats the next episode?

@LaserEverything

4 ай бұрын

UTM Emulation for beginners, just published: kzread.info/dash/bejne/oqd-x7dscbS-eLw.htmlsi=lwfJZaKJT46-8qtO

@rupinderjeetsinghhans

4 ай бұрын

@@LaserEverything thank you ❤️

*where's part 2*

@LaserEverything

4 ай бұрын

kzread.info/dash/bejne/oqd-x7dscbS-eLw.html

@fvrrljr

4 ай бұрын

@@LaserEverything THANK YOU

The windows installation is loop after i restart the vm :(

not succeeded. I encountered this error code: 0xc0000428.

How do i then install ezcad2 once I have windows open .

Checked the performance of x64/x86 windows 10 on mac m1 pro, in brief, the virtual machine works very slowly, so much so that it is impossible to use, explorer opens for 10 seconds..., everything hangs heavily - it is impossible to use, I do not recommend installing x86/x64, it would be much better to use vps....

Where are the 🍎 people at? 😂

@LaserEverything

Жыл бұрын

Facebook -_-

@ARBWoodwork

Жыл бұрын

🙋