Learn how to inspect deck beam spans and deck joist cantilevers during a home inspection at www.nachi.org/....
Жүктеу.....
Пікірлер: 21
@LifeSurfingDude5 ай бұрын
Very helpful Ben. it makes perfect sense to me now and I can easily design my own deck without overkilling it and pass inspection.
@internachi
5 ай бұрын
Glad it was helpful!
@orangeblossomhomeinspectio432 Жыл бұрын
One of the great finds that I see all the time.... Joists that are on a balcony that doesn't penetrate the wall and are not part of the joists in the home!! Thanks, Ben and everyone behind the scenes at InterNACHI. John Grimaldi Florida CMI and Home Inspector Mentor
@internachi
Жыл бұрын
Thank you for watching. I teach free online classes for inspectors at www.nachi.org/webinars. Free, online, and open to everyone.
@anthonypecoraro5402 Жыл бұрын
Thanks Ben great video
@internachi
Жыл бұрын
Glad you enjoyed it.
@spelunkerd2 ай бұрын
Thank you, I had one of those 'aha' moments when I understood the topic at a higher level. Am I correct to assume that measurement of actual joist or beam span and cantilever are always taken from the center of the relevant load bearing post or beam, rather than from the closest face of the post or beam? Are there any exceptions?
@internachi
2 ай бұрын
I believe so.
@regularstan62122 ай бұрын
Thanks
@internachi
Ай бұрын
Welcome
@jakester45525 күн бұрын
I never saw a joist called out as also a beam (4:20). I assume the joist becomes a beam when it carries the load to the rim board, which supports the other joists? So on this example, every other joist is also a beam? Either that or the drawing isn't right, or maybe I'm just not getting it. I wish you had a 3D rendering also.
@internachi
24 күн бұрын
Thanks for watching.
@tylermoore7189 Жыл бұрын
So, i plan to build a dropped beam deck using 3 ply 2x12 southern pine, this will be a free standing deck beside my house. So it is permissible to cant the beam and the joists using this table. Deck is going to be 16 wide by 22 long, i want to get it dialed in before i build but i think i am over doing it. I plan on running the beams parrallel to the structure and just want to have the correct measurements but i keep getting confused reading the different tables.
@internachi
Жыл бұрын
I appreciate that! Thanks for watching.-
@erikherroz26382 ай бұрын
How do you an enclosed deck inspection
@internachi
2 ай бұрын
Can't inspect what's not visible. Good point.
@AllFallBeforeMe Жыл бұрын
Holy shit bro, i think ill just send some pictures to the building official and let them decide. 😂
@internachi
Жыл бұрын
Okay. Do that. Thanks.
@regularstan6212
2 ай бұрын
Good luck.
@TheTabwinner2 ай бұрын
Quit repeating yourself. This is not rocket science.
Пікірлер: 21
Very helpful Ben. it makes perfect sense to me now and I can easily design my own deck without overkilling it and pass inspection.
@internachi
5 ай бұрын
Glad it was helpful!
One of the great finds that I see all the time.... Joists that are on a balcony that doesn't penetrate the wall and are not part of the joists in the home!! Thanks, Ben and everyone behind the scenes at InterNACHI. John Grimaldi Florida CMI and Home Inspector Mentor
@internachi
Жыл бұрын
Thank you for watching. I teach free online classes for inspectors at www.nachi.org/webinars. Free, online, and open to everyone.
Thanks Ben great video
@internachi
Жыл бұрын
Glad you enjoyed it.
Thank you, I had one of those 'aha' moments when I understood the topic at a higher level. Am I correct to assume that measurement of actual joist or beam span and cantilever are always taken from the center of the relevant load bearing post or beam, rather than from the closest face of the post or beam? Are there any exceptions?
@internachi
2 ай бұрын
I believe so.
Thanks
@internachi
Ай бұрын
Welcome
I never saw a joist called out as also a beam (4:20). I assume the joist becomes a beam when it carries the load to the rim board, which supports the other joists? So on this example, every other joist is also a beam? Either that or the drawing isn't right, or maybe I'm just not getting it. I wish you had a 3D rendering also.
@internachi
24 күн бұрын
Thanks for watching.
So, i plan to build a dropped beam deck using 3 ply 2x12 southern pine, this will be a free standing deck beside my house. So it is permissible to cant the beam and the joists using this table. Deck is going to be 16 wide by 22 long, i want to get it dialed in before i build but i think i am over doing it. I plan on running the beams parrallel to the structure and just want to have the correct measurements but i keep getting confused reading the different tables.
@internachi
Жыл бұрын
I appreciate that! Thanks for watching.-
How do you an enclosed deck inspection
@internachi
2 ай бұрын
Can't inspect what's not visible. Good point.
Holy shit bro, i think ill just send some pictures to the building official and let them decide. 😂
@internachi
Жыл бұрын
Okay. Do that. Thanks.
@regularstan6212
2 ай бұрын
Good luck.
Quit repeating yourself. This is not rocket science.
@internachi
2 ай бұрын
Okay. I'll stop. Okay. I'll stop.