MAGNUS Pro and MAGNUS are now shipping to: US 🇺🇸 CA 🇨🇦 (NEW!) MY 🇲🇾 (NEW!) EU 🇪🇺 UK 🇬🇧 AU 🇦🇺 SG 🇸🇬 Don't see yours? Sign up to our mailing list to make sure you're the first to know when Secretlab MAGNUS arrives on your shores secretlab.co/magnuspro

@rengoku7136

Жыл бұрын

Hope they ship to Philippines :(

@damysticalone87

Жыл бұрын

Nice, but make also an option to choose: + a complete silver, white, glas, or and transparent version of the table too; + white and transparent cables; + more sizes variants.

@ty-qu6qr

Жыл бұрын

they shipped to Australia before Canada? make it make sense

@aldwincastaneda3114

Жыл бұрын

Make it available for your PH fans please :(

@PaalKiwi

Жыл бұрын

NZ please, we're next door to Australia 😁

My only suggestions would be some more patterns for the MAGPADs, I'd like to see stone and wood patterns for some natural aestethics. A heavy-duty monitor arm for ultra wide screen would be nice. The cable channels on the left and right side of the desk need a bigger opening going into the cable tray on the back. But the price and value of this desk is spot on.

@anonay7238

Жыл бұрын

Agreed. Needs wood effect magpads to brighten it a bit not everyone wants a black/dark table top. Also monitor arms should be able to lift the heavier ultra wide monitors (30lbs+)

Just ordered one. Can’t wait.

@TheRealAriLove

Жыл бұрын

Did you get it yet?

This is incredible! I'd love to see how it would look in my studio.

Bought this desk about a month ago. This is possibly the best desk on the planet right now. Cable management is absolutely amazing. Only gripe I have is with support of 3rd party monitor arms - which I had from before and had to do some major compromises to get it mounted to the desk.

@misbakhan20

4 ай бұрын

How does the desk feel to hand? Does the metal make a clunky sound?

@ZheikoNileth

4 ай бұрын

@@misbakhan20 No sounds at all - there is this leatherette cover over the table, which isnt too soft, but not hard either - its not cold because of it, and I can sit with short sleeves and still have my arms on the desk without freezing. I live in fairly cold country too.

@TylerPlunkett9

3 ай бұрын

But you got your monitor arm to work though? I got. Triple monitor stand and thinking about getting this desk. Just don't want to have to spend extra $400 on stands when I got one.

@ZheikoNileth

3 ай бұрын

@@TylerPlunkett9 I had to angle grind a bit of the old holder for it to fit - it also does not fit where the cable management tray is underneath - I could cut that too, but decided not to - so I have now my 3x screen setup on a corner of the desk where it could fit

@FraizyMD

2 ай бұрын

Hey! Late to the party but hopefully you see this! I know you already answered this question but just needed some additional clarification. I know that secretlab makes their own monitor arms but I have a 43" ultrawide monitor (they don't make arms for that), so I have my own. Are you saying that it won't fit onto the desk? Or if it does, will it completely block that back cable tray? I'm seriously considering this desk, any information would be helpful :)

Im in love with my desk but ... this looks amazing.

I have always complained that standing desks are ugly-looking. When I saw your ad pop up on Instagram, I was delighted to find that finally someone understands the needs of the user. Looking forward to buying it when I move to a new home!

I just put my order in for the Magnus Pro. I can't wait to get it. Such a badass looking table. Well done.

@varunaX

Жыл бұрын

never heard anyone call a table badass before in my life on this planet

@marcosmaciel1347

Жыл бұрын

@@varunaX he just feels cool bc he spend almost 1000 on a table that glows and hides cables

@mynameiswalterhartwellwhite420

Жыл бұрын

@@marcosmaciel1347 🤓

Ordered the Magnus Pro XL can wait to get it setup with my new HDR video edit suite. Will upload a review in November when it arrives. This desk with an Apple Mac Studio M1Max and 42" ASUS Rog Strix HDR OLED is going to look awesome.

i love this desk! but i' m waiting for a corner version :-)

love my chair cant wait to buy the desk

Get mine at the end of October! I'm excited!

@jamesyinbaare

18 күн бұрын

Did you get it?

You guys are geniuses.

So much Tim Cook vibe in the presentation :) Love the new Magnus desks, especially the XL version.

This was scarily well timed with it's announcement. I'd recently started looking at desks to replalce my current old one and was liking the look of the magnus, but wanted to get a sit-to-stand desk instead for the variety usage. Due to arrive tomorrow, so looking forward to seeing how long it takes to get setup. Instructions say it won't take too long to assemble, but with the clutter/lack of free space in my room, clearing and dismantling the old desk first, and then giving the carpet area a clean before setup......it could take a while :P

@SpicyDragoon

9 ай бұрын

9 months later, how is it? I'm looking at getting one myself.

I would totally get this if I had the room 😆

My god this is beautiful

Bloody amazing

I'd love to see an L shaped extension for this like there was with the previous desk. I'd snap that up in a heartbeat.

The original Magnus was a great desk but I think you guys absolutely nailed it with the Pro. Personally I think the price point is spot on. I'll definitely be purchasing one. One question though, will the pc arm support larger cases such as the Lian Li OP series? Thanks SL and very well done!

@Secretlabchairs

Жыл бұрын

Hey, thank you so much for your support, really. To share more, our PC mount can accommodate to PC cases with heights between 354mm to 543mm and widths ranging from 170mm to 300mm. We do recommend that you check out its specific measurements on our page to see if it'll fit your PC. secretlab.co/pages/resources?product=desk-accessory Hope this helps!

@Zockmock

Жыл бұрын

Just to save everyone a click. Dimension wise it fits but the weight limit of 15Kg will probably be the KO. The Lian Li Dynamic XL case itself weights around 10-11Kg and the pc mount can handle up to 15Kg. So a "light" (if that is even a thing) build may fit but be sure to check first.

@eduardksenofontov6641

Жыл бұрын

@@Zockmock thank you legend! Lian li XL plus the new 4090 is 100% KO

@WinterReflections

Жыл бұрын

You think just shy of $1,000 for the Pro, which doesn't even include half of the features they show in its cost, is good pricing?

@ultimomos5918

Жыл бұрын

@@WinterReflections that's what I said lol

Wow!

If everything was in stock ready to ship I'd have purchased one tonight with all the add ons but don't want to wait until next year

@WinterReflections

Жыл бұрын

Yeah, I've been looking at these desks periodically over a two year period since the original, I don't know if I've EVER seen the desks + accessories in stock. They're always on preorder and it has to be intentional.

I waited that my whole life... I'm buying it. Right now.

@johnwilliam8366

Жыл бұрын

I'm still waiting for the desk to arrive in California for over a month. It would be easier if the desk could be purchased from a store.

Wow! It's official, I'm in love with it. Time to start saving for one as I am disabled and bed bound which makes it impossible for me to get anything done even with my height adjustable hospital bed. I end up having to have an over the bed desk making it hard for me to put my feet on the ground. This is super cute, practical and neat 👌

Are there plans to make a white version?

@iprinceza_

Жыл бұрын

Yeaa me 2 have a white setup.. dont want to mess it up with a black table 🥹

@tragedyproductions4165

Жыл бұрын

This would make the perfect purchase for me if they designed a white one🙁

@KevVanc

Жыл бұрын

Listen to the people! My money is ready!

@DrHurden

Жыл бұрын

Wood top would be nice

@TheLawIX

Жыл бұрын

No plans to build a privileged desk. Check yourself.

Wish these came with metal castor wheels for mobility in our photo studio

Needs support for a 4+ monitor setup for monitors that are mounted horizontally while stacked vertically 2 high on top of each other (2x2). Would be an awesome desk for software development if you built something like this. Specifically I'd like to see some accessories that can support 4x 32" monitors without harming the desk.

@serenazahora5431

Жыл бұрын

@@Culperrr Not with the monitor mounts they supply. You might be able to make another mount work but you'd probably be better off using 2 or 3 mounts spread across the desk to accomplish that.

@Culperrr

Жыл бұрын

@@serenazahora5431 For weight distribution?

This would be perfect for Odyssey Ark!

Damn, when I finally graduate next year, I will buy one of these desks. Hope u ship to GER.

Wish they had this in the Philippines

Next year baby! Next year cos I just recently got the omnidesk wildwood xl 😂

Like it! A lot! What is missing: - an Ethernetkable that runs like that build in Power Input from the Base foot to the PC - I would prefer something more like a "Cutting Mat" instead of that leather thing

Noiiice!

I really love this design, and will order at the end of the month! Maybe a nice future, you see a lot of gamers using this desk. What if there would be a possibility to hang a console (PS5/Xbox) just like the pc? to free up deskspace

The thing I love about secretlab is they always make sure you get your money's worth.

@WinterReflections

Жыл бұрын

I sure hope so, you're gonna spend $1,000 minimum just for the desk + desk mat, without even getting into shipping and other accessories.

I'm definitely keen for one. What PC case is in the video? I'd have to downsize mine to fit in there (currently at 21kg)!

I'm definitely buying one of these in the coming half year. Compared to other motorized high-quality desks it ain't THAT much more expensive and compared to the cheap motorized stuff, this will probably outlast most by a long shot if as durable as claimed. Plus being steel opens the way for a lot of little DIY add-ons, like say 3D-Printed magnetic brackets to hold a Ethernet Switch on the underside or the legs. Do have some specific questions on some dimensions i may inquire about via the website. Notably of the back cable tray.

@WinterReflections

Жыл бұрын

Have you considered that none of the accessories/features advertised are included? Even down to the desk mat Every little piece that makes it novel is sold separately for ridiculous markups.

Making me want to sell my magnus for this excellent design

You guys are putting together an amazing company. I'm sold on this desk, need one for my son.

@TheJoBlackos

Жыл бұрын

Same here, looking to buy one for my son, this one fits all needs :)

looks cool for dj desk

el setup de mis sueños definitivamente

If you could make a three monitor mount, I'd be in heaven.

Bring this & the rest of your products to South East Asian markets please!

You know it would be great if you guys listed the Current (A) and Total power usage (W) for the electical specification before people gonna over plug the device on the table or fried their expensive PC or other electronic 😉 But my best guess is that the power cable you guys used is rated "10 A", therefore the power usage is limited to 1000W (if outlet provides 100V) or 2400W (if outlet provides 240V) which I don't think is safe for high end PC (esp with RTX 4090) lol

One major miss is that nicely concealed power routing in the left leg isn't configurable. If your desk only has the right side touching your going to have to route a long cable from the right side over to the left side just to power the desk. Two bad the powered leg couldn't have been put on either side at assembly.

The pro is cool but the price is high. Maybe your next desk could be a Magnus XL without the sit-to-stand functionality. Keep the other features, but reduce the price and give us a 70 inch desk that acts like the original.. Because the only thing I didn't like about the original magnus was the length of the desk.

@user-hv8uw5ku3u

Жыл бұрын

Def agree. Love the xL length but want the L-shape add on too

@WinterReflections

Жыл бұрын

The price should be lower AND they should at very least include the mats in that price. It seems to me the desk mat isn't really a bonus add on, and is actually pretty much essential.

I love my magnus desk, i would never get any other gaming desk again besides secretlab

@Secretlabchairs

10 ай бұрын

Appreciate the kind words - we're glad the MAGNUS has served you well!

I have been a Secret Lab support for years now from the titan chair too many accessories. However, sadly I found out that I am not qualified to purchase this MAGNUS desk because it doesn't ship to Taiwan. I've contacted your one of the staff member today about this problem and wished to come up with a plan, I even offered to pay extra for shipping. Becuase this table is big and couldn't ship to Taiwan I suggested that how about we seperate the parts and I'll happily pay for everything. Becuase this is the desk of my dreams, I've been saving money ever since I heard sercet lab were going to make this table and now it's a shame I couldn't purchase my dream desk.

Would be good to know the power draw of the motor, I use UPS units for my PC and streaming equipment, these have a limited load capacity and I may not be able to use the power passthrough with an electric motor in the desk.

Do you think the pc mount will be updated for newer/larger cases? for example LianLi O11 Dynamic Evo XL - which the height of the case fits the dimensions of the mount but the width is longer than what the mount can handle.

ngl this installation looks way better than the other company in Singapore. Absolute nightmare assembling my friend's O___desk

What if your wall power comes from the right side of the desk? The legs should have been interchangeable, so that the power cord could be connected on the right side if necessary. As it is, I would have awesome cable management except for the power cord running across the floor for the entire length of the desk. And I doubt it's long enough to (nor should I have to) run it up the right leg, through the cable tray, and back down the left leg to plug it in to the wall for a clean look.

Well after 3 months of looking at reviews for a standing desk i think I found the one.

I am interested in this for my second office. With the cable management compartment, will I be able to clamp my Elgato Key Lights to the desk?

@firefly9838

20 күн бұрын

Bro has more than one office? I have truly failed in life😳

When is the LAN extension for the desk leg coming out? Desk seems incomplete without it

Im extreamly torn now. I was so excited about the L desk extension and now I have this to consider. Wish there was a Sit to Stand Secretlabs L Desk. 😖

@Secretlabchairs

Жыл бұрын

We totally understand that everyone has their requirements. At the moment, we don't have news of a L-Shaped Desk extension for the MAGNUS Pro yet, but do stay subscribed for the latest news at secretlab.co/magnuspro!

@neil12011

Жыл бұрын

Same! Need the L shape

Just make it a 4-legged version and there is perfection! plus the warranty needs to match other table manufacturers too....5 years is too less compared to the average 10-year standard.

I hope they do akatsuki table design like the chair.

Hey guys, would you be intersted in sponsoring the channel with your Magnus Pro XL Desk? 😁😁

Make a 60-70 inch Walnut wooden top version and you have a deal.

I need it in white. I have an all white aesthetic. I can't ruin that now.

We need white version and more colors

Looks super nice, would love to get one so I could use the PC mount, I have a custom loop 5000T though and the empty case itself weighs 14.5kg. The mount says it has a limit of 15kg. Any chance of heavier support in the future? Also, my two predator monitors have chunky power bricks with their cables, are these typically hideable within the desk also?

@Secretlabchairs

Жыл бұрын

Hey Akairem, the built-in cable management tray in the Secretlab MAGNUS Pro and Secretlab MAGNUS Pro XL is bigger than before, now measuring 111mm deep. You can check the dimensions of your power brick to see if it will sit inside the tray. To add on, while the current Secretlab Premium PC Mount can hold up to 15kg and can hold most PC cases, we know that in special cases, such as yours, you might need more, and we'll bring this up with our Product guys!

@Akairem

Жыл бұрын

@@Secretlabchairs Thanks for the reply :) I hope the heavier support can come soon and i'll defo look to get one

@Austerys

Жыл бұрын

@@Secretlabchairs I would also be interested to see a larger mount as I'm running an Omen 45L that weighs around 22kg and would like a desk that could mount it.

@TheAquilaSamurai

Жыл бұрын

Would also be interested if a mount for heavier case would be possible. Has been using a Corsair 200R which likely would be no issue, but before ordering this desk I'd recently upgraded to a 780T for better airflow (no mid-towers availabe had everything I needed/wanted). The 780T is rather heavy, just on it's own, so with the PSU added, it definitely exceeds the weight limit for the current mount. It's also not a clean box shape, so even if the mount coulld support the weight, I'm not sure whether it would handle cases with curved or angled edges :S

@secretlab, what about Ethernet cables? Do they still dangle or is that connect into the desk as well?

I want, no I actually NEED this desk. STAT YESTERDAY!!! Please make shipping this available with USPS. I want one but due to my location I can’t accept the UPS or FedEx deliveries.😕

Would love to get one asap but the XL doesn't ship out for another 3 months. Too long to wait when you need a desk for daily work...

This looks awesome and I would love this but the Thermaltake Core P6 will not fit in the PC holder without modification and would still raise the minimum desk height by a few inches because the holder doesn't mount flush to the bottom of the desktop, and that is a dealbreaker for me.

SecretLab, what is the brand of monitor in the video and what size screen?

Can the monitors be stacked horizontally on top of themselves with that dual monitor stand ? Waiting for these desks to arrival in AU which should be in a couple of months :)

@Secretlabchairs

Жыл бұрын

Hi there, our MAGNUS Dual Monitor Arm does not support the stacking of monitors at the moment, but we'll be sure to share your feedback with our Product team for future consideration. Thank you.

Very impressive...hope they available RSA

im tryna upgrade my setup and the desk will be too i just seen this was just released will the new hyte y60 case fit the pc pc mount

Can you attach any Elgato Stream lights or camera mounts to the table ?

I like the idea of the hanging PC mount but my Phanteks Enthoo Primo Full Tower weighs a ton. Wonder if it would support it. And does the single arm monitor mount support 38" ultra wides?

@Secretlabchairs

11 ай бұрын

We are unsure of the specifications for your PC, but our Premium PC Mount can support up to 25kg/55.1lbs. You can also find the full specifications for supported dimensions under the Resource section her: secretlab.co/products/premium-pc-mount. As to our MAGNUS Monitor arm, we're working on a Heavy-Duty Monitor Arm that support wider and heavier displays, and we'll share more details when those are made available.

Love my Titan , but it makes my work chair feel like a dollar store chair lol

Looks great you guys! I wish I would have known about this before getting a new desk last week.

@Secretlabchairs

Жыл бұрын

Ah, sorry about that. Our Product guys are constantly iterating and improving on new products and that takes time but thank you for the kind words! We'll be here if you ever decide to give us a shot.

@COOLio544

Жыл бұрын

Ahh I bought mine from omnidesk last week too. I wish I’d seen this

@wolvwwc

Жыл бұрын

@@COOLio544 Return it!

Been looking for a desk for so long with all the right features and along comes this one from a company I trust. Why do I trust you? Because my Titan chair still looks and feels new, and when one of the arms broke, my fault, you guys sent me replacement arms at a great price. This is the desk I will be getting along with the monitor arms. Can’t wait!

The monitor arms look really slick, but will a standard clamp-on monitor mount work? I already have one, so I'd hate to have to buy another just to use with this desk.

@Secretlabchairs

11 ай бұрын

We'd strongly recommend using the MAGNUS Monitor Arms as they have been designed to work with the Secretlab MAGNUS Pro optimally, but you can check out specifications sheet for the MAGNUS Pro to see if your existing mount is compatible: secretlab.co/pages/resources

I have messaged your twitter handle as well but will ask here... have a concern about my monitor layout. I have a 49” ultrawide with a 35” above that and a 27” to the left of the 49” two concerns are weight? And depth from monitor to me when mounted, although I need to figure out the Mount and assume I can use any monitor mount on your desks?

Hi, nice desk! I'm very interested but I have a question : are the monitor arms compatible with an Alienware AW3423DW or a Samsung Odyssey Neo G9 49", which are quite large monitors? Also, is the RGB strip compatible with Philips Hue in a way?

@harrysmith5353

Жыл бұрын

Ah just asked the same thing . Love the look and functionaly of this product .

@ZombifiedTech

Жыл бұрын

If they are heavier than 17 lbs than no as per the double arm monitor mount system says each arm limit is 17 lbs.

Even carries the PC as it changes elevation. 😱

This is how it should have been released last year.

I know what I'll be getting with my christmas bonus LOL

Just thought of a feature that could be an Add-on for the original MAGNUS right as I finished last comment Make a replacement leg for the MAGNUS that has a power supply attached to it that goes in the try to give it a pro feel

Just ordered mine. This deks just fit my needs to a T! However my only complaint is having to wait 4+ months to receive it. This Is a little much in my opinion. I knew this ahead of time so I cannot place the blame on Secretlab.

@Secretlabchairs

Жыл бұрын

Hi Javier, we appreciate your support and we're glad to hear that the MAGNUS Pro is exactly what you're looking for. We know that you're excited to get your hands on the desk, so hang tight and rest assured that our team is doing everything they can to get your order to you as soon as possible.

I really like the idea of the pc mount...unfortunately, I have a Corsair 7000x that's too big. 😭

HS They listened!

가지고싶다..

Now we need an L shape wan too. And different top . Maybe woood ? Wow

Can a full sized 81key piano fit underneath? Or maybe a piano tray?

I have the monitor arm. Do I clamp it to the rgb strip or does the rgb strip go over it

Wish I saw this before I bought the IKEA desk

I want it but our set up is white. Any plans for a white desk in the future?

Will the desk hold a Samsung odyssey ark 55”? The weight is 41,5 kg. I’m looking for something and I think Magnus pro is a great option

Can you daisychain them so having 3 forming a U shape but raising or lowering one rasises or lowers them all? For people who work and play from home, a two monitor desk is often insufficient. I use two monitors for my main desktop, two for my work laptop, and often like to have my own laptop open on the side. I have yet to find a desk that offers a good solution to this. I'm currently using two L shaped desks put together to form a I_I shape but it isn't ideal.

Will other monitor arms work on this desk while also allowing the cable management cover to fully close? My monitor is too big and heavy for the monitor arms that you sell.

@Secretlabchairs

Жыл бұрын

Our MAGNUS Pro is designed to work with a vast majority of monitor arms with a screw clamp length of under 100mm. As long as your existing monitor arm falls within the shared specifications, it should be able to fit the MAGNUS Pro. For a more detailed specification of our desks, head over to secretlab.co/resources!

We need a monitor arm that can support larger screen (38-49 in)

Just got mine and love it. One thing I'm not happy with is that you call it a metallic desk, when it's largely made from a wood composite and then plated with metal.

@GamingLoodsAlmere

Жыл бұрын

Question: Do you have any issues with the desk being easy to wobble around from pushing?

@andriegilsson6623

Жыл бұрын

@@GamingLoodsAlmere not at all. Very sturdy.

Will the monitor arms support the weight of a Mac Studio Display at max height? If so, I may just have to purchase the arms alongside my Magnus Pro.

@Secretlabchairs

Жыл бұрын

The Secretlab MAGNUS Monitor Arm can support a maximum weight of 8kg and maximum screen size of 34". As long as your monitor falls within the shared specifications, it should be able to fit well. secretlab.co/products/magnus-monitor-arm

Bought one , but with a bunch of accessories and a titan xl chair... all shipping in march because no stock :( sad

Damn, this looks amazing! Do you need a mat though? The leather top surface is a little odd to me. If you dont add a mat, is the surface just hard metal?

@Foxhood

Жыл бұрын

According to their FAQ: You can use the Magnus desks without a mat, in which case you would have the powder-coated steel surface and two ridges at the side. They do advise to use the PU leatherette pad as it protects the surface, is more comfortable and is replaceable.

@Secretlabchairs

Жыл бұрын

Appreciate the support! We strongly using the Secretlab MAGPAD with the MAGNUS to protect your desk's surface. It's also specially designed to deliver a comfortable feel under the skin.

@WinterReflections

Жыл бұрын

They intentionally made it so the desk is uncomfortable and less practical if you don't buy their mat as well. It's weird to me how they act like the mat is a "bonus'" and optional so they can sell it separately.

@WinterReflections

Жыл бұрын

​@@SecretlabchairsThe mat should be included. The desk is objectively worse if it's just bare metal with ridges on each side. Why does it cost extra? Why only PU leather?