YOU Can Print RMRRF’s Most Insane Models for FREE!
Ғылым және технология
Today, we print a banana.
Try everything on Brilliant free for 30 days! brilliant.org/zackfreedman
What are your favorite prints? Tell me at / discord !
Support future videos: / zackfreedman
The Rocky Mountain RepRap Fest brought a gaggle of nerds to my doorstep. Like geese, they made a lot of noise, extruded a lot of crap, and threatened to bite me. So I printed their stuff. I don't even know why I'm writing this, nobody ever reads the description.
===The Stuff===
- Maraca by Leedle Dynamics: www.etsy.com/listing/16794504...
- Simple Printed Talon Mag by Qwertz0: www.thingiverse.com/thing:553...
- Adjustable Blaster Optic by T-MAN: www.printables.com/en/model/1...
- Reel Workout by Cookiecad: spool-models.cadit.app
- Pezfinity by Pezliz: than.gs/m/1027034
- Pez Tiara by Pezliz: thangs.com/designer/fixumdude...
- Braille Slate and Stylus Set by PortlandPrints: www.thingiverse.com/thing:412...
- Braille Training Cell by 3DPrinty: than.gs/m/1037863
- TD-1 by Ajax-3D: ajax-3d.com/
- HueForge: thehueforge.com
- A Better Filament Swatch: www.thingiverse.com/thing:664377
- Filament Librarian donations page: filamentcolors.xyz/donating/
- Imperial Scaling Banana by SMC: www.printables.com/en/model/1...
- Metric Scaling Banana: N/A (the banana is not an SI unit)
- BabyBelt Pro by Rob Mink: github.com/RobMink/BabyBeltPro
===The Filaments===
Some of these affiliate links give me money.
- Cookiecad PLA Fairy Floss (Maraca, sponsored): cookiecad.com/products/fairy-...
- Cookiecad Unicorn PLA (Maraca, sponsored): amzn.to/4bF95X8
- Inland Shimmer PLA (Maraca, Optic): amzn.to/3QMhuzY
- Polymaker Matte Marble (Maraca): amzn.to/3WIT26G
- Overture Orange PETG (Maraca): amzn.to/4aozfMV
- Cookiecad Mint Chip PLA (Reel Workout, sponsored): amzn.to/3UZyMfF
- Cookiecad Funfetti PLA (Reel Workout, sponsored): amzn.to/3V216xO
- Cookiecad Sunrise Elixir PLA (Reel Workout, sponsored): amzn.to/4bETDKE
- Cookiecad Granite Mixer PLA (Reel Workout, sponsored): amzn.to/4buu670
- I'll add the rest later, I'm tired
===Timetable===
00:00-02:19 Get off my lawn!
02:19-04:23 Maraca Blaster
04:23-05:30 Reel Workout
05:30-06:26 Pezfinity
06:26-09:30 Braille Training Cell
09:30-12:02 TD-1 and HueForge
12:02-13:42 Filament Librarian
13:42-15:19 Scaling Banana
15:19-18:58 BabyBelt Pro
18:58-24:11 Wrap Up
===Credits===
"RMRRF 2024 Day 1" by Zachary 3D Prints: • RMRRF 2024 - Day 1 Of ...
"3D Printed Braille Cells - Printing with Purpose" by 3D Printy: • 3D Printed Braille Cel...
"Free 3D Printed Braille Cell - Public Domain!!" by Filament Stories: • FREE 3D Printed Braill...
"Metal and Flexible from EOS" by 3D Printing Nerd: • METAL and FLEXIBLE fro...
Stock footage from Storyblocks
Interference SFX from Partners in Rhyme
Other SFX from www.zapsplat.com
Пікірлер: 512
I can’t believe Zack 3D printed all of these people!
@dingdongdaddy589
29 күн бұрын
I can’t believe it’s not butter.
@ckellingc
29 күн бұрын
Hey that Inland filament is cheap enough to print whatever you want
@clancyr1696
29 күн бұрын
I wonder if theyre on thingiverse...
@lady_draguliana784
29 күн бұрын
sadly, a few appear to have been printed on the miscalibrated belt printer... 😬
@LackLusterMedia
29 күн бұрын
(With chocolate filament)
"Then they'll have to wash their hands with soap." Always great writing.
@delarey
29 күн бұрын
I came here to say this! Best line ever!
@thebossman6687
29 күн бұрын
Lmfaoshiafomc😅!
@ImXyper
29 күн бұрын
zack would be a great poet
@keenheat3335
28 күн бұрын
no need, 3d print out a mechanical hand for each person. Maximum grip strength to show who's dominant, while keep away all the hand germ. Best of both world.
@Frank_wow
27 күн бұрын
zach is the funniest
The Pez Tiara is by Fixumdude, we will have to release it soon! Thank you for sharing PEZFinity with the world! Great meeting you at RMRRF!
Yes! The braille cell's Public Domain license clearly condones crafting confectionery copies consisting of cocoa. Thank you for featuring the design :)
@JRo250
27 күн бұрын
You are an incredible human being. You've already public-released so many great designs but then top it all with this one for people in need. Well done!!
@fredio54
27 күн бұрын
I have not seen any of your work, but came here to sag good on ya!
That Braille training cell is the reason why 3D Printing is so awesome, decentralised creativity
3d printy is the real one for making the tools for education far more accessable and public domain. Thank you for making the world a better place 3d printy!
@Liedson9000
29 күн бұрын
Real one what? Of which category do they distinguish themselves as the Number One?
@sodiumhydrocarbonate4707
29 күн бұрын
@@Liedson9000 Yes.
@Wolphie
29 күн бұрын
@@Liedson9000 *insert LazyTown music video here*
Thanks for the shoutout! Sorry the work on the scanning is taking longer than expected! I have some good ones for Christopher and the Blåhaj though as they dont have lots of hair ;) Miss you, Brooke, Millie, and of course Rob!
Aww, Reese was so excited to be a surprise guest in your video; thanks for making her day! Love the prints (my son totally wants to print the blaster now!)
Wow! I am honored that you decided to cover my creation in this video. Thank you for the kind words on the TD-1.
@MattPoston
29 күн бұрын
PC only? Or does it also work on Mac?
@AJAX_3D
29 күн бұрын
It is also Mac compatible
@patricktierney4392
29 күн бұрын
I can't wait to get/make one. Amazing!
In case anyone is wondering what Zack is like to meet in person, he's exactly as you'd hope. Welcoming, friendly, a wonderful creative energy. He indulged me to talk a good 5 minutes about my filament hanger system. There was also this teenage neurodivergent guy there (game recognize game) and Zack handed his glasses to him to put them on. I demanded the guy's phone camera to take a picture so he would have proof of this beautiful memory. Zack is a good dude.
@BasementStudi0s
18 күн бұрын
what a sweet moment. im sorta confused tho, how were the glasses important to the teen
I'm sure I'm not the only one who felt the free Braille board very heartwarming.
I absolutely died laughing at the wash your hands with soap joke!!! that's straight GOAT tier dad jokes right there
I watch the credits every time for 2 reasons. 1. I know how important retention is and 2. Zach's are hilarious 😂
***Description is fixed!***
@Imthefake
29 күн бұрын
thanks
About the credits needing to be shorter: to me that's the best bit of the episode. That's why I watch the episodes to be honest
Good to see the 3D Print General in a video again. Polymaker really stepped up to "right the wrong" that YT did to him.
@bnl346
29 күн бұрын
Glad to see someone else spotted him. Good on Polymaker
@NapalmXD
27 күн бұрын
@@bnl346 Hell ya! I had to Ctrl F the commends to confirm I wasn't loosing my shit imagining things.
@bnl346
27 күн бұрын
@@NapalmXD na, I'm there with you. I think he's still got something good going on the "Odd Sea", but KZread done him dirty. Shame!
@b-rad7708
24 күн бұрын
@@bnl346 wait, my context clue senses are telling me terrible things. please do explain?! and no im not going to spend the 2 minutes searching google for myself because i just asked this question and that would be rude of me. thank you in advance.
@bnl346
24 күн бұрын
@@b-rad7708 3D Print General is the author of 3d Printing Failures (available on Amazon), which has invaluable information on this hobby. It's a lot of what he used to have posted here on KZread. I learned a ton from him on basic troubleshooting and fine tuning of printers and prints. He was also an advocate for the printed 2nd amendment community. He interviewed several guys like Ctrl Pew and also showcased many of his creations. Now, KZread has strict guidelines on what you can and can't show in regards to these "types" of prints. For instance, you can't show anything in relation to assembly of the firearm. This guy was one of the cleanest channels, when it came to these guidelines, yet they still sent him a strike on his channel; then another. So, he started deleting anything related to 3d printed guns and appealed back to KZread. Needless to say, KZread was his career and he didn't want to risk getting his channel banned, permanently.... ....but then, someone, maybe a friend, started uploading some of his deleted videos on their own channel. KZread took this as "dodging their strikes" and permanently banned his channel and all videos. All his catalog, all the income, was instantly gone. He's been trying to get something reinstated ever since. Heck, I believe even Linus Tech Tips was standing in for him, since he had more of KZread's ear. Anyways, that's the long and short of it, I guess. The General was a wealth of information, banned for silly guidelines that he never was in violation of, in the first place.
That's awesome you shouted out the braille reader I have a blind family member and this could have really helped them in the early years really hoping school Para programs can get these in the classroom ASAP
It was SO fun to be here. Thanks for the pic! Ps i was the awkward teen who was wearing their phone in an eye burningly orange gauntlet. Edit: holy shit I made it into a Zach freedman video!.
5:27 Missed opportunity to put two rolls of PEEK and PEKK on there for the pun :P
"..and a collapsible sub-miniature printer with an inverted glass buildplate heated by coils of crystal clear indium tin oxide" - The best description of Positron yet We love being the run-up for an excellent punchline. 😂
That's my son with the carrot sword @0:24! He is very excited that you put him in the video 😎
Thanks for featuring the Scoreboard! I have had multiple people tell me today that they had no idea it was printed until your video. Wish time had allowed a bit more chatting, but I'm glad I was able to "gift" you Mariah before we both left the venue.
So glad you mentioned 3d printy, all of his designs are amazing and he seems to be just a straight up guy - he has multiple modular building systems and recently incorporated gridfinity cross-platforming for one of them!
Screwfinity! The ultimate 42mm screw organizer system
@pezliz
29 күн бұрын
With PEZFinity on top!
@TechJeeper
29 күн бұрын
@@pezlizand on a headband! Just make sure you duck when you go through doors.
Wait, there are people who don’t think Zack reading names is the best part of the video?
@MrDivinePotato
29 күн бұрын
IKR!
@adanufgail
28 күн бұрын
I'm usually watching his videos in my Watch Later playlist on a second screen, but when wmI watch other things on my TV and I get to the end of a video where the creator has a sponsor and then nothing else, I click off. I imagine that's common, which is why many creators mid-roll their sponsors.
Honey wake up Zack just posted
The "*COUGH* INSULIN" at 9:30 almost made me choke on my coffee, great comedic timing
@uuuuuusssseeerrrrrrr
25 күн бұрын
ikr
The dumbbells are hilarious and I'm absolutely printing those for my girlfriend to use
Thanks for featuring FilamentColors!! We actually have 2000 published colors, and ~425 in the backlog currently :) I'm hoping your box gets here soon! 🎉
19:32 I think that's the first time on youtube I've heard that name being said near accurately
6:10 calling all members of "The Sanctuary of Sacred Slots"
6:10 calling all members of "Gridstianity"
I'm actually going to miss the read at the end, was a nice touch to keep up with it every video.
What i love/hate most is how useful that banana was for scale for those motors 😂
@GoetiaTV
29 күн бұрын
I thought it was a maker joke, but yeah seeing it in use sold me. 😂
I cant believe mariah made it into a video before christmas 🤣🤣 great meeting you, great video as always
9:30 you might wanna get that cough checked out, because Brook aounds siiiick 🤙🤙
its so nice to watch and hear you say all those names. It's always entraining. I'm sure the long term followers can understand curating the list. keep up the amazing work my friend.
I guess we'll have to wait for the metric banana.
I can definitely see a use for the Baby Belt printer. If you look around on KZread enough, you will find people are beginning to LARP sci-fi open world survival games. Instead of just doing various forms of bushcraft, they're doing various forms of bushcraft while using a laptop and 3D printer they've drug out into the forest. It's silly as hell, but the Baby Belt looks like it's small and stable enough to print off a couple simple tools over a weekend for that sweet sweet ad revenue. Heck, if they get enough views, it might even pay for the filament they used during the video!
That TD-1 is an awesome idea. It just makes it a more simple process.
"I borrowed a technique from the frozen dessert sector" your scripts leave me speechless
13:09 just get two more 2D printers and order will be restored
@TiogshiLaj
29 күн бұрын
And if not order, at least parity.
@flamestoyershadowkill6400
29 күн бұрын
preferably ones that can inkjet print cds
FWIW I always watch the full credits. Too good.
The TD-1 is so fricken brilliant. I got my kit, printed the parts, just got to make the time to build it.
Hey I made it in the video! Anyways great to meet you at RMRRF keep up the good work and yes I watched through the credits.
I made a cameo! Great meeting you!
7:20. Best joke I've heard in a while
"Hah Insulin !" -Brooke. Made my day.
I love hearing all of the people shouted out at the end of the episode and despite my short attention span I always let your episodes play out all the way. I also dream of the day when I can financially afford to get on that list lol
Your videos are the only ones that I actually watch the entire patreon sponsor names. The names are almost as entertaining as the rest of the video.
I might have to make that blaster, and hueforge looks WAY cool
It was so great to meet you there, and thanks for taking the time despite being super-busy! The tips on the POM and PVDF filament were super-helpful, and I can't wait to try them as soon as I have a way to handle the terrifying resultant gasses. Also, glad you made it to the FilamentColors booth! I was sure hoping this would be the result :)
My aggressive filament collecting has gotten so out of hand I took up woodworking to make custom filament storage cabinets. Now I have two problems.
I was planning on printing a Maraca last week! I think this is a sign I should get started
You should add a Crawl to the bottom of the screen to display list of patrons, announce upcoming events, etc. It can run the whole episode or just to the end of the info. Thanks for all the great videos. You and the Mrs(I apologize if the title offends) do excellent work. Keep on, keepin’ on!
Ahh I gotta make the next one. I'm in Aurora but had no idea about this :[
@user-cm4gc9to9o
29 күн бұрын
Same!
That isn't janky at all, that's the most glorious printer I've ever seen.
I'm not going to lie, I'm glad to hear you're going to shorten the credits. I always watch them because I know it's important for your metrics, but they've been getting pretty lengthy for a while now and it's been getting harder and harder to stick with it. Good compromise you've come up with I think.
@peterbronez1188
29 күн бұрын
Yup. Credits are kinda fun but way too long. Makes complete sense to back off.
you are so helpful with 3d printing
Hey I always stayed for the credits at the end of your vids :)
Funny enough I've just printed "Happy Fathers day" in Braille on some some keyrings.
What brilliant designs!
I love your channel. You have some amazing wordsmithing skills.
Fascinating video! Thank you for all the work you do. 🎉
I started watching this channel a few months ago when I first got interested in 3D printing because I had a stupid idea and people wanted to much $$ to help make it a reality. Thanks dude, I learned a lot of cool info and tips that I have already applied expanding on my electronics work!
I got my very own copy of HueForge a week or so ago...it's been a slog, I think in part because the instructions come in video form, but in the software's defense my first project is something that it wasn't really designed to do in the first place. On the bright side, when I got it there was a coupon to get a healthy discount on a spool of Polymaker filament, and those guys are great supporters of the community so it wasn't a hard choice to pull the trigger on the whole deal.
That rubber band SFX on the flex, tho. chef kiss.
LeedleDynamics' Maraca blaster is great for dual-wielding as well. Print two and shake em to reload! Oh yeah and if you run into any friction with the slide, lay down some lube between it and the body. I used white lithium grease on mine.
I am sad to see you leaving your small creator era, but happy to see you have success. RIP to all the funny Patron names.
the "Hah INSULIN!" from off camera made me actually laugh for the first time in days. That was incredible!
Awesome as always
You and 3DPrinty are the two that I really was hoping to run into while I was there but I missed both! Sensory overload there! Maybe next year!
I love when you read the names. Also that banana is sick.
Beautiful writing, as always
Dude, you kill me. Love watching your videos just for the laughs, that T1 bit, I died.
"Zack Freedman's Weird Stuff" is probably an accurate description of the entire channel
Smart decision on the supporter shoutouts, and you're being more than fair. Great video!
Ok but I would love to see more info about that wood block mountain qr code. I love qr codes.
9:30 Based Brooke 🫶🏻
Can't wait till you switch up to only new names spoken thought the episode but you'll have to limit the number of new names to 10% of the video runtime while you'll have a secondary limit of also 10% run time of already named patrons and speed up the scroll to 250%.
I have always loved the Patreon readout, looking forward to the inevitably hilarious abbreviations.
15:35 YOOO I saw that printer pack at LTX last year. Really cool to see it again
oh man, that baby belt pro is seriously SO COOL
I watched till' the end. :) Thanks Zack! God bless you,
Your play on words continues to impress, almost as much as your prints!
My god the writing is on point in this one
Wish I would’ve been able to make it. Looks like so much fun
Awesome video as always!
Who doesn’t stick around for the credits? it’s one of the most entertaining parts of the videos.
4:46 did a number on YT compression oO
I really do look forward to the Paetron list at the end. The vids are great but the names get me laughing every time!
As always your comedy is gold.
At the end there when you read off Olive Robbins , I heard , All of Robins and I thought WOW thats really impressive.
17:18 First time viewer. Enjoying your content. Is that BabyBelt Pro spitting out circa 2018 FIRST Power Up cube swag?! (IYKYK)
some good stuff thanks!
5:30 PEEK performance? Looked like PLA performance.
I feel like that wash there hands with soap jole went way underrated
This is the first video I have watched from this channel. 3 minutes into the video and I subscribed. This guy's funny.
You are holding your banana phone upside-down! The stem antenna goes up! (duh!) I would like to say, regardless of how you eat a banana (stem down is the correct way), that stem UP is the only valid banana phone orientation.
The sheer number of banana puns you can make in such a short time baffles me