INSANE EV CHARGER INSTALL AT DONCASTER CABLES' FACTORY
Ғылым және технология
INSANE EV CHARGER INSTALL AT DONCASTER CABLES' FACTORY.
Join Jordan, Cory and Luke for a special commercial EV charge point installation at the Doncaster Cables factory. The Artisan team install 4 different EV charge points using Doncaster Cables' very own EV Ultra cable as well as getting up to all their usual antics. Cory plays a prank on Jordan, Luke learns a lesson that could save his job and Jordan enjoys a good northern breakfast!
Stay to the end to find out who won the competition featured in the previous video - "130 MILES IN AN ELECTRIC VAN, WILL WE MAKE IT?" - • 130 MILES IN AN ELECTR...
Subscribe to our KZread Channel for more great electrical content: kzread.info...
For more information on EV-Ultra Cable - bit.ly/3IHNv6a-EVUltra
About Doncaster Cables - bit.ly/3IDLHLo-DoncasterCables
Buy Runpotec Cable Puller - bit.ly/3ICFlf9-Runpotec
/ doncastercables_official
/ admin
/ @doncaster_cables
🧰🛠️ Tool Of The Day 👇
Armeg Impact Rated Roofing Bolt Driver: amzn.to/3G5dMJR
Knipex Super Knips Flush Cutters: amzn.to/3o1jqX9
Unilite Work Lights:
Get 25% off all Unilite Products using our code "ARTISAN25"
UK Store - bit.ly/UNILITE
Europe Store - bit.ly/UNILITE-EU
USA Store - bit.ly/UNILITE-NA
Australia Store - bit.ly/UNILITE-AUS
Timestamps:
00:00 Coming up in today’s episode
00:10 We’re at Doncaster Cables
01:03 Here’s what we’re doing
02:17 Lock out tag out with Cory
03:23 Re-use the board?
04:26 Burnt out Rolec
05:41 Cable tray plan
07:19 This van is a disaster!
08:07 Prepping the new DB
10:20 Day 2
11:46 “Borrowing” some cable
12:19 On site guide to the rescue
13:25 A Northern breakfast
14:01 Why we use EV Ultra cable
15:48 4 charge points head to head
17:21 Correct PPE!
18:03 Cory’s DB update
19:16 Hijacking the factory
20:12 Northern hospitality
20:26 Superb stripper
21:54 Tool or the day - Armeg Impact rated roof and bolt driver
22:46 Cory’s spider prank on Jordan
24:00 Cable puling made so easy
26:00 A lesson in cable tying
27:15 Cold cutting or Kolkata
27:38 Mounting the EV charge points
28:19 Honest tool review!
29:59 Day 3
31:55 The finished DB
33:05 Competition winner announcement
34:37 The finished product - Job done
🏷️😱 Big Boots - get 5% off our amazing work boots when you use our discount code "ARTISAN" at checkout here bit.ly/BIGBOOTS
🔔 Become a Channel Member To Get Access To Exclusive Perks 👇
➤ / @artisanelectrics
✅ Check Out All Our Favourite Tools Here 👇
➤ www.amazon.co.uk/shop/artisan...
-----Electricians Business Course-----
📩 Sign Up To My Electricians Business Course Here And Get The First 4 Lessons Free 👇
➤ bit.ly/2Z582zI
🔔 Subscribe to TOOLS4SPARKS KZread Channel 👇
I Also Have A Dedicated KZread Channel About Tools:
➤ / tools4sparks
-----MY ENERGY PROVIDER-----
🐙 Get £50 credit when you switch to Octopus Energy 👇
➤ share.octopus.energy/zappy-sh...
🏷️ DISCOUNT BUSINESS SUPPLIES 👇
➤ www.amazon.co.uk/tryAB?tag=ar...
📈Make the most of your KZread analytics with TubeBuddy - Sign up here👇
➤www.tubebuddy.com/ARTISAN
-----TRADES INSURANCE DISCOUNT-----
If you need to renew your public liability insurance or need tools in van insurance, I recommend Rhino Trade Insurance, I've just renewed my insurance with them.
🏷️ Use My Discount Code “ART5” and you get a 5% Extra Discount On Their Already Excellent Prices.
➤ www.rhinotradeinsurance.com/quote
📞 or call 01162437904.
📱 Don't Forget to Follow Social Media, FOLLOW US on Your Favourite Social Networks 📱
📸 Artisan Electrics Instagram Account 👇
➤ / artisanelectrics
🐦 Artisan Electrics Twitter Account 👇
➤ / artelectrics
📓 Artisan Electrics Facebook Account 👇
➤ / artisanelectrics
This video is for entertainment purposes only please do not attempt to copy or recreate it. Do so at your own risk.
#sparkylife #electricianlife #artisanelectrics
Пікірлер: 320
me waiting quietly for the Flexi con jokes
@artisanelectrics
2 жыл бұрын
HAHAHA I WAS SOOO TEMPTED
@rubbersteve123
2 жыл бұрын
So was I, 😁
@matttaylor8390
2 жыл бұрын
I was waiting as well after all the defrosting jokes lately
@farmlad1883
2 жыл бұрын
When I saw the flexi con I did think that Bundy been there before. (Or was it one of Adam's weekend jobs) Luckily Artisan ripped out the shocking workman ship, and put in some quality cables, and chargers! (Love both of you channels!(
@electricalservicesmaroc
2 жыл бұрын
Yes
It was great to have you on site for those (short 😢) few days! The final result looks great and the cable you used looks... familiar?? As a side, at about 33:06 Cory starts dancing (At least we think it's dancing?) and we can't believe you didn't notice 😂
@curtismal1726
2 жыл бұрын
Yeah that cable stuff looks really good I think its made by Prysmian
Amazing guys work! Very nice idea you installed on the wall. Cory makes these videos. He's funny putting spiders in Jordan's EV. Wait to see Jordan will laugh.. Thumbs up!!!! Cheers!!!
I have used an Ideal cable sheath stripper like Knipex brand since 1978. It has saved me alot of time and skined cables over the years. Enjoyed the video and learned somethings too.
Video of the year Jordan! Really enjoyed that, especially seeing our friends up at Doncaster cables. Give us an update on the spider.
“Up schitts creek without a paddle” 😂😂😂😂😂❤❤ love the content!!
It's like regular electrical work taking place interrupted every 5 minutes by Jordan from the shopping channel! 🤦♂️
Great job well done all of you.
Cory makes these videos he’s so funny !!
What beautiful install guys
great Artisan instal Jordan , Cory and Luke ,keep up your extent work ,
@artisanelectrics
2 жыл бұрын
Thanks 👍
Great video, absolutely love the passion & pride you guys have for the trade.👍🏼 I hope no spiders were harmed in the making of this video.😂 You all have done a really neat & tidy job of the EV chargers.👌🏼 Cory thanks for the funny entertainment, Well done guys.👏🏼
@artisanelectrics
2 жыл бұрын
Thanks a lot!
Great content guys , and really enjoying learning from you guys thanks Jensen ⚡️👊
Great video and demonstrated your professionalism in installing EV chargers. Is there not a cover you could add for the trunking ?
Your best video for a while. I really enjoyed it, I also prefer watching industrial work over domestic, and I would rather do it too. The Armeg screw head looks a great little tool. I might have to invest in one. I would have preferred to see the cables dressed on the lower side of the tray, then any additional cables that needed to be added wouldn’t have to cross everything you’ve just installed. A transition to a smaller piece of tray for the drops down to the chargers would have looked even more professional. It’s always easy to comment as your watching someone else’s install in the comfort of your home. It’s completely different when you’re on site with what you believe is all the materials you will need. I know from experience. Keep the vids coming guys 👍
Great video guys !. Looking forward to the factory tour. I was looking at the amount of green mould on the old Rolec units your removed and the huge amount of green mould on the that drip fence, at the bottom of the side cladding ( above your new cable trays ) sitting on the top of brick wall of the building. The amount of water that hits the side of the factory, is ALL leaving off that drip fence. When it leaves the drip fence, all of that water is going to test the I.P. rating of them new four units to the Max !. I personal would recommend some additional protection from the sheer deluge of water leaving the side of that factory cladding via the dip fence. They could really do with four small canopies over each of the wall boxes really ?. I think it would really scary to see the level / amount of water hitting them units in a heavy storm. No I.P rating is going to stand up to that level of water ingress long term. What do you think Jordan ?. A recommendation to the customer to install a few small canopies ?. Could save a few calls backs due water ingress 🤔?.
Amazing job 👏 congratulations 👏 🎊
Nice to see you up my neck of the woods. would have nipped over and introduced myself . as always brilliant and interesting video.
I enjoyed watching this video! 👍 Good work lads
The spider in the van, that’s going to be fun if it comes out when driving! 🤣
@mrgfromoxford8644
2 жыл бұрын
It’s actually really stupid and dangerous, there’s a true story in America when a woman died after lowering her sun visor and a spider fell on her lap , she panicked and went straight over a cliff edge . I’d go mental if he did that to my van .
@JMackyD18
2 жыл бұрын
@@mrgfromoxford8644 yeah I wouldn’t be very happy either. I hate spiders massively. I don’t think he intended for it to go inside the actual dash though looking at his reaction
@corynoahmac
2 жыл бұрын
It came out of its own fruition later on that day fortunately. Luke spotted it and he was freed 😆. Unfortunately the VW lives on
Nice job except using 200mm cable tray was excessively wide, and the cables just resting over the edge of the tray?? As mentioned below, I'd also be furious if someone put a spider in my vehicle like that. Not to mention a bit sad for the spider too.
Great video. You guys are so clever 👍
Glad to see they gave you some proper food while you were up here :)
This video needs 100% more Ruben
“Up the creek without a paddle!” , is the appropriate description and is suitable for use Down-under. I have generally heard more colourful language used in the example provided! 😂😜
I’ve got a RS pro wire stripper I used offshore which is very similar to the one in this video. Never had much luck with it so stuck with knife but going to give it another go👍
Great video guys! One point to note, in my experirence using cable ties on outside cable tray. The ties only last for about 5 years, due to the weather and enviroment conditions. Best to use cable clamps - more expensive though! I had the task of replacing the snapped ties on a run of tray once, man that SWA cable was heavy!
@makg4655
2 жыл бұрын
Will / should use metal ties therfor last way more than 5 years
@discomonkey3492
2 жыл бұрын
@@makg4655 they weren't around 25 years ago me old
we do 1.5m for every bracket, and uni strut for cable tray runs, we use the zebs clips and the 90s clips on the side to hold them in place as well the connections on the tray so they are very secure, from the ceiling and along a wall as well
Cant wait for this one!
"Up the creek" is the correct saying 🙂
When the pages of you're on-site guide are stuck together... You've been enjoying reading it far too much!
RJ11 connector, not RS485 (which is a serial standard). I also hope you clamp each current clamp onto the same phase of the incomer as the charger is connected to. It'd be entertaining otherwise. (3 phase is such fun!)
@xxxxbigdavexxxx
2 жыл бұрын
RJ11 all day long lol
@davepusey
2 жыл бұрын
Technically, if it has four contacts then it is RJ14 (RJ11 only has two contacts)
@xxxxbigdavexxxx
2 жыл бұрын
@@davepusey nah mate, RJ11 has the possibility of having 6 pins, it is usually seen with just 4 connectors, but on some telephones you will see just 2 used, RJ9 / RJ11 or RJ22 have 4 pins but are smaller in size than the RJ11
Hope your other vendor has plenty of charge ports! Ringo's drumming made him famous too.
For what it's worth, the Aussie expression is "up shit creek without a paddle." Great video as always!
@ryan543213
2 жыл бұрын
Yeah I was looking for that. Up shit creek
Great video !
cool vid i have been looking for them cable rollers .
"Up S**t Creek, without a Paddle", from an Aussie. Enjoy the channel. keep up the great work!
@adamw225
2 жыл бұрын
Ha yeah came to the comments to put this one in
I used to live about 200 metres from the doncaster cables factory in bentley. I still work in sunny donny! In fact the house i lived in is on the far left of the drone shot at 16:34!
Cracking video as always!
Another great video, nice to see you all hard at work, and taking such pride and care with the install, good to see some other makes of EV chargers to, the last one looked neat and compact, but tight to wire? ideal for the front of my house (maybe) :) nice to see the different EV Ultra cables they make, and they you may get your own Tag on it, on the subject of the cable, there are no instructions of how to enter the free giveaway for the Artisan Branded EV Ultra Cable :) maybe its just a thumbs up (done) and a comment? (done). Can not wait for the next upload from you :):)
@heladas90
2 жыл бұрын
The sync ev is compact but is an absolute doddle to wire, you can only use certain entry points but its the safest and smallest harger on the market
Up sh*t creek without a paddle, come on Jordan lol!
Cant wait for this one
Nice job boys. I wonder when the spider might pop up & scare Jordan.
Lovely neat job.
I would love to see your own branded cables that would be brilliant because that would be able to advertise who installed it and who done the amazing cable running and amazing angle drilling
Three phase boards. Scary work those!
@FG-br8yv
2 жыл бұрын
Totally common in Germany!
Good job guys but the only thing letting you down is the hole you made for the cable entry to the board. Use some fire rated foam or fire products to seal and protect.
This channel is now one big advertising channel
No earth on the tray sorry lads stick to houses the way the cable comes off the tray is shite
Another quality video lads
@artisanelectrics
2 жыл бұрын
Glad you enjoyed it
It must have been in 70's when Ideal were selling a cable sheath stripping tool just like that, a 'V' section to guide the cable with an eccentric central , rotating blade so it stripped around the cheath and then along the sheath. They were standard issue at a company back in those days as 'American District Telegraph' I probably still have one somewhere.
Nice work boys. Just an idea but I personally would of cut t pieces into the tray where the armoureds come down and used tray to come down to just above the EV chargers. Would given a nicer finish rather than the armoured coming over the sides of the tray. Other than that nice work. Keep up the great content!
What a video! Please do way more multi-charger installs if possible! Would be great to see e.g. 4 Zappies, each with 3phase and with full solar and battery integration 🤓 Of course you need the customer for this, but if possible, please do!!
@artisanelectrics
2 жыл бұрын
Thanks!
Nice job 😎
What do you guys think of the PodPoint charge points? I recently had one installed for my yet to be delivered Audi etron.
You have used one cable diameter between each final circuit, unless you have applied a correction factor
Great video but just one question? How far did Jordan get before he realised the Ohme back plate was upside down?
Proper Northern breakfast... would be from a van in a layby. :)
@artisanelectrics
2 жыл бұрын
Oh yes!
20:45 i'm using this Yokari (c) style knife ( German ) since my days at college ( somewhere in the 90's )
"up the creek, without a paddle" in OZ
True blue aussie here, its "Up shits creek without a paddle".
Nice vid again boys
M10 red heads for that tray!! Jesus
Why did you put a hole in the wall with a hand grenade
What you use in industrial applications looks a lot like what we use in residential applications in Canada, haha... Although residential and industrial are actually pretty similar here, just the scale is different.
YOUR BEST ASSET IS CORY! (Help, Cory just randomly broke into my house and told me to write this).
Very nice work! The only thing you should have done is to put the cabels low on the tray instead of high as if in the future you add more chagers the new cabels now has to cross the old cabels.
26:40, Jordan, no safety glasses whilst cutting the cable ties, tut tut, you said to call it out 😉
Why is the Ohme junction box low? Could a EV reverse into it?
Did they not scrap the set heights for EV chargers in Amendment 1 of 18th edition? I’d personally still fit them between the heights mentioned for accessibility. Just curious??
Is the load monitoring different for them? Single phase charger on 3 phase install or does it just monitor the phase it's installed on?
its all about the FLUSH CUTTER!! :) but i'll defend the interchangeable Wera drivers for service calls or field service work specifically where you have flown or traveled by ship to the job.
Along with glasses on the job, Gotta have harness and helmet on when going up on the lifts (Or at least harness i think). Also the cable cutter thing is called a Jokari cable stripper, Theres a bunch of them depending on what diameter you need to strip. Think the only difference is between a jokari and the one you got is brand name, Not sure though, Looked exactly like a jokari.
I do love the way you all take so much care to produce a beautiful end product. I was so disappointed when the installers of my solar panels and Zappi charger used standard twin and earth in conduit to connect the charger - it looks amateurish after seeing your installations.
Nice to see the various chargers and I suppose that was the point ie to compare and contrast. But otherwise, the Easee Charger for 3 phase with built in load balancing would allow all 4 chargers to be put on a single circuit. Assuming not a massive demand. I hate to say it (not really 😀) but I do think you missed a trick by not routing the cables over and behind the cable tray before coming down the wall to the chargers. Would be so much neater.
No way that spider will come out on the Motorway...the range will have it back in a charge station before the spider makes it out from behind the dash. 🤣🤣🤣
That EV ultra stripper is also under another name originally called "WEICON". The EV ultra branded one must be more expensive but they are both exactly the same thing made in the same factory
@artisanelectrics
2 жыл бұрын
Its a great little tool!
@pn8902
2 жыл бұрын
@@artisanelectrics for sure, there’s also one with a knife blade on top. Spare blades aren’t easily available on amazon, weicon do sell them. I’d just sharpen it by hand
Dave’s on a roll 😂😂😂
Mounted the ohme home pro back plate upside down lol
Luke really does look like Podrick Payne off Game Of Thrones 😂
Yes indeed Jordan - "up sh*t creek without a paddle"
Being an ole boy from heavy industry, a few old euphamsims entered this apprentices' tender ears in the 1980's. Most cannot be repeated! Amongst the more tame was up sh*t creak. If something turned into a huge job unexpectedly, it was said to be 'a bigger epic than Ben Hurr'. If many things went wrong at once it was said to be a 'cluster f*ck'.
One thing puzzles me though. If that cable has 3 cores and a data cable in it won't the AC frequency I give interference on the data lines? As I understand from a network point of view you never run a cat5 cable along AC cables.
Dose running data and mains electric so close together not cause issue with data transfer? I always told to run the 2 separately.
@timbo19
2 жыл бұрын
In practice it does not. In this case it isn't "data" anyway as it's an analogue signal coming from the CTs. Remember that the live and neutral fields also cancel each other out pretty well (equal current running opposite directions) so it's not really an issue even for actual data use. Shielding doesn't protect against EMI, it's primarily for RFI.
Come on, you can use standard side cutters and get a flush cut. I only found this out about 2 months ago after twenty five years in the industry. We live and learn.
looks really good with the tray and all only thing i would have done different is to not use foam to close the hole since it tends to look really nasty after some time and crumble, but silicon would also be no good by that big of a hole, best would be mortar or cement or something similar
Interesting video. 4 year apprenticeship in Ireland from commercial side. Cable tray , trunking and conduit. Within a year you are doing that by yourself and is seen as not a important job. Its expected you can run that. I think domestic sparks getting better wiring knowledge at the start. I for sure lagged behind when I went to college. UK system seems funny. Do you guys go to college one day a week ? We do 7 or 8 months on site and the rest in college . Its all done in block slots. Fair play on shout out on PPE. Always wear your goggles at least
@knockmore50
2 жыл бұрын
Ok
Who actually wants some cable with Artisan Electrics stamped on it?
@nickbea3443
2 жыл бұрын
More importantly, what will the name add to £ per m?
That stripping tool looks like a life saver where did you get it from please?
Cory...Nothing wrong with a bit of bottom entry... 😂
I assume since Doncaster Cable is calling it Cat5 it passes standard Cat5 tests, but I'd be interested to see the performance with it literally bundled beside high amperage power wires. Obviously speed isn't terribly important if it's just being used to monitor the CT's or give a data connection to the Charger, but it would be interesting to know regardless. Is it a shielded Cat5?
@thesteelrodent1796
Жыл бұрын
Looking at the specs for these cables, it's just a normal Cat 5 cable rolled in with the other wires. None of the chargers use the full speed of a Cat 5 and it's only used to make it easier to hook them up to an existing network, so it's doubtful the noise from the power going through the neighbouring wires is a concern. Would not be surprised if they worked just as well with a regular phone cable hooked up to the RJ45 connectors
Got here quick time
It’s up the creek mate
I Would of been cheeky and brought a drum of Prysmian Armoured cable in
With that much roof space I'm surprised they don't have a massive solar array!
Go 'Billy Preston' Cory!
That tool from Doncaster is basically the equivalent of a pipe cutter for the plumber... Seems odd to me that it isn't standard kit for electricians! Haha
Hmm the stripping tool goes the other way around the cable then yes pull or push along the cable.
Great Vlog guys. I wonder if the cable tray was available with an exterior cover for U.V protection and protection from physical damage. I know they are available in black. Maybe you could get brown to match siding.
Did I see right, three days to do this with three of you? Figured it would’ve taken two days tops with two of you!
@JorgeAMG187
2 жыл бұрын
1 Day max 2 Guys here in Germany
@EdthePlumber
2 жыл бұрын
The work only took a day but Jordan’s van needed the rest of the time to get a full charge
@artisanelectrics
2 жыл бұрын
@@EdthePlumber pretty much 😂
@rogerbean393
2 жыл бұрын
Plus camera guy !!! Ching Ching
@artisanelectrics
2 жыл бұрын
It was only less than two full days work but we had two half days travelling up and back and the time doing the factory tour and lots of eating 😂