This is the good school for people what they don’t know how must to working the injector’s….good explaining!!!

Best video I have seen. so clear, no gimmicks makes it simple and doesn't blind you with science. fantastic

This is what i looking for, clear and show in hand without selfish knowledge. Well done, please keep it up.

Great video!!! Ive got an injector on its way out on my n47 BMW. Injectors are surprisingly well accessible so i might have a go at that. Amazing how many video's just skirt over the smallest steps and if someone is actually following the video as a guide it will completely throw them off.

This must be the best video on KZread on teaching you about diesel engines learned alot well done

@roypettersson6840

5 жыл бұрын

peter friel BB

@citraatopi5788

5 жыл бұрын

A

@novi0974

4 жыл бұрын

Indeed !!

@abusina147

3 жыл бұрын

Y⁶

@abusina147

3 жыл бұрын

Tý⁶6⁶⁶

I had questions on how to remove the injector since it was stuck. You just answered that question! Great video

@norsinahnullah5820

4 жыл бұрын

why my enjin diesel not fuel cosomption what the problem

I'm a mechanic and I watched the whole video. Merci Beaucoup

Good video to help the DIY person without access to better diagnostic kit. Ok there will be critics but in the real world this is perfectly adequate advice. Thanks for posting.

Best video i have seen on KZread simple very informative

Awesome video, just what I was looking for, much appreciated thanks.

Videos like this are the education channels you need on KZread

wow, what a quality and well explained video! subscribed instantly after watching!

This is very helpfull! Thank you for making this video :)

This was very informative, well done, i had a no start condition in a great wall steed equipped with delphi inyection yours started right after cranking even when you removed 2 inyectors

Awesome, thank you very much for thinking about others!

Thanx for the wonderful video on injectors test & replacement !!

Excellent video!

@khaikhairul3520

7 жыл бұрын

cmdarb141

@rajanadar5032

7 жыл бұрын

cmdarb141

@princesspeach9788

7 жыл бұрын

cmdarb141 b h

@petersonjoseph9589

7 жыл бұрын

verry good

@htunkyawoo9494

7 жыл бұрын

Peterson Joseph

very good instructional video. I would cover all the injector holes, before blowing out the bore with compressed air. You do not want to blow debris into the other bore holes. After cleaning the bore holes with a rag, blow them out again. The only reason for cleaning area around bore holes is to avoid sand or metal shavings out of the cylinders. Your first step in cleaning around the injector before removal would have been sufficient. Using a solvent spray on a cool engine and rising the area, then blow dry, would be best practice. Thanks for posting.

Great video! The only thing I would do slightly differently would be to take the caps off the injectors when they're in to avoid any tiny particles going in them when putting it in the bore. If the injectors are really stuck in you can slacken the clamp a little and turn the engine over. The fuel pressure will blast the injector out a bit making it much easier to remove. Brilliant video though. Your clio engine looks much better than mine!

@mugenlords

2 жыл бұрын

i was cringing when he was working above them with those open heads

Out of all the videos I've seen this is most helpful thanks very much

Very informative video on test & change of faulty injectors !!

Amazing video, helped me diagnose 2 bad injectors on my bmw. Thanks!

Very well made video. Thank you. I have a different engine - a Nissan Patrol 2.8 turbo - but this video has helped with diagnosis of injector problems.

Great Video. Very clear instructions. Thank You.

Thanks for the video I've just changed mine easily with your help & it's sorted now

Brilliant video, thank-you.

more knowlage than school thanks. great vid

Great video, very well explained, keep up the good work, thanks a lot yeh...

Wow! Just keeping going!! Great video explanation!

Simple and sweet, nice information, good job bro.

This is a very good teaching. Well done.

Fantastic excellent concise video. You are fantastic !!!!!!

I was kind of sceptical to the robot voice, but good job really did explain it really well and it spoke at nice speed.

Outstanding video. Very informative. Thank you very much..

Excellent job and I learnt lots of things. Thank you very much for your hard effort. Please make more videos.

@satterprabha

3 жыл бұрын

Lllllllllllllllĺllĺĺlĺl

i'm very thanks for making this video

Excellent video! Thank you

it is very important and good video for disel car owner

What a great tutorial on injector problems it's award winning thank you so much so helpful to me i can't save it on my computer for some reason . Sean

i loved this video thanks for uploading this vid and it is very helpfull for me

So great video ! Specially on explanation :)

Fantastic video Thank you

Great video and Great labour. thank you.

thankyou great video 👍🏻

Thank you!youve explaind it superb!

very well explained. so the engine achives fully conditioned when 4 injectors are replaced? thanks

Great video thankyou. I subscribed and look forward to more diesel related content. 👍

Very good calmly presented and clear many thanks

my questions are all answered.thanx for the good video

Great video, good job, thanks for sharing, though I would have replaced all four injectors, but that’s just the way I roll with my cars!

@arthurimona5901

3 жыл бұрын

So replacing all 4 would be the best option right? So that means, the lower the return flow, the better the injector.

@akeelmukhtar1808

3 жыл бұрын

@@arthurimona5901 yes that's correct mate

@Alexander_l322

3 жыл бұрын

You pretty much have too replace all of them because they all work for the same time and last about the same time so changing only one or 2 will be a waste of time as the other 2 will fail shortly after and need replacing too. If you can’t afford all of them at once then just do one at a time but it’s not wise.

@Alexander_l322

3 жыл бұрын

As you can see here after changing those too the other 2 are still worn but are working fine right now. It won’t be long before those too fail like the first 2 did.

@potatoman9116

Жыл бұрын

​@@akeelmukhtar1808 can't you just scan it with a diagnostic tool???

Great informative video sir 👍👍👍 great work sir

sir jeep ok tlga ang tuturial mo. pwede mag request? pano vah mag lagay ng piston ring sa piston ng motorcyle

Very healpful information

Indeed its really helpful me to learn how to check and change injector

Very helpful video men , keep it up bro

Thanks a lot well explained. Common rail is very different compair to traditional system.

Merci beaucoup. Ça m'a aidé vraiment

Terima kasih atas informasinya,dan berbagi ilmu pengetahuan untuk seluruh pemirsa di dunia di atas bumi ini, Tuan dan nyonya yang terhormat, barangkali memungkinkan sangat bermanfaat dan berguna sekali bagi yang belum atau tidak memiliki pengetahuan tersebut,karena bukan di bidangnya. Namun, semua ilmu ilmu pengetahuan dapat dipelajari,hanya waktu dan alat bantu serta tingkat kecerdasan yang tidak sama . Namun, secara pribadi dan private serta privacy, saya berterima kasih banyak. Semoga tuhan yang maha esa membalas kebaikan anda dan keluarga, Salam hormat kami. TTD, RHBS

Nice video many people have no clue about diesels but may still be reasonable petrol mechanics ...

THANKS TEACHER I LEARN GOD BLESS U

자세한 설명 감사합니다.

love the video. it's very well made

Just a fine demonstration.

from iraq my greeting for you r information well done

Cool video - loved it !!!! Thx dude

Amazing,,i love this video.thank you for teaching me

It's an early Delphi System. The pumps used to eat them selves and screw the injectors. But things have got better happy days👍🏼

excelent video! thanks men

best video on diesel engine

Hey! I have a question about painting a car. My car is painted in indigo blur but it has some paint cracks due to sun i guess,i took a sandpaper and removed all those paint cracks. My question is,do i have to sand paper my entire car or just specific spots where are cracks. Also do i have to use a primer spray for entire car? Thanks!

@user-tc8oz5mg3k

3 жыл бұрын

اهنةعى احى حسن هشحى ٠٥٣٤٦٤٧١٠٧

@gscranage4594

3 жыл бұрын

Spray the repaired areas with grey primer, sand back with wet & dry sandpaper. Use degreaser if necessary. ensure the car is dry & free from dust. Respray areas with choice of colour. Enjoy. 🚙

I love this work .fuel pumps and injectors.i know all work old model diesel engine

Nice one, thanks for this vedio

This is the best video I have ever seen in Internet

Thanks ..Excellent video.

Thanks a lot very clearly explained

Amazing video !

Super useful! Thank you!

@aminullahkhan2723

5 жыл бұрын

thank

Excellent video! Please tell me: He didn't programing the new injectors? Or how to did it? Whitch program?

Great instructional video

Very usefull video . Thancks for sharing

Very enjoyable and helpful. Thanks.

@okmobile5227

5 жыл бұрын

Ruiiffvb

thanks for putting this on

very nice....its very good information to all of us.....

i will do same thing now on my 1,6 diesel engine. i have smoking and sometimes hard to start. and vibration is higher all signs as in this video. know what to do next. thanks for informative video

I m a machanic this vedeo is very helpful thanks mate alots.excelant vedeo

Watching from Qatar Informative God bless

Thanks! Very good.

Great video, thanks :)

@josepeixoto3384

5 жыл бұрын

reminds me of .the virginian.

Great video. Thz you so much. Bumes

EXCELLENT VIDEO NO BULLSHIT THANKYOU

very helpful video !

thanks for sharing great video

Hats off to this video maker

Its very nice video thank you very much...

The best video on inject

I have a Mercedes c class and cant see a priming bulb ..does turning the key and operating the fuel pump a few times do the same job ?

Realy helped for me.

very useful. nice tutorial.

Very gud vedio .lots of information

Awesome!, learned a couple of new things. Thanks :-)