Dear Friends, support us for more videos! Click Thumb UP, Share this video and subscribe us. After watching this video, watch our New tips video - kzread.info/dash/bejne/nnigs5mCmtW4Y8o.html

Genius idea for cutting the wood log on the table saw. Your site is a must for all beginners through to trade apprenticeship trainees.

@UWOODWORKER

2 жыл бұрын

Thanks very much!

The steam trick is an oldie, but very effective! I still can't figure out how that power cord trick works!!! All in all, great tips!

@lenac3587

2 жыл бұрын

Neither can I 🤨

@patrickperry6945

2 жыл бұрын

Just lift the legs far enough to pull the plug out

@sfperalta

2 жыл бұрын

@@patrickperry6945 True enough. And that's how I would do it if possible. But in this video, he does NOT lift the legs. Still figuring it out...

@giorgio84

2 жыл бұрын

The trick is, he is not moving "head" anywhere, he just "wraps" cord around legs so it becomes with the loop on other end of table, try to do as he does and you will get it maybe

dude that power cord thing was awesome. Impossible even

@tassie7325

2 жыл бұрын

Its also a trick. If you follow the actions in reverse, you will observe that the plug was never passed under the rebar in the first place..

When wood has been crushed all you need is a few drops of water in the dent and a little time. If the dent is vertical wet a piece of paper towel and tape it in place overnight. Running long screws into hardwood requires lube and any lube will do, wax, grease, soap, oil even spit will help.

@UWOODWORKER

2 жыл бұрын

Thanks for your comment. I like when viewers write their tips!

I loved that the technique for transferring holes to the wall was used to display your well deserved KZread 100K subs plaque

@UWOODWORKER

2 жыл бұрын

Thanks, friend!

Ну да, сало же у всех в холодильнике есть, а вот мыла в ванной комнате нет

Well done!

@UWOODWORKER

2 жыл бұрын

Thanks!

Bar soap works well for getting screws in. I like the tiny soaps they give out in motels.. It's about the right size to keep in the tool kit. And you don't get slimy hands..

@giorgio84

2 жыл бұрын

Knucklehead youtuber also suggested using hair natural oils work too, for bald people it wont work but you get the idea...

And yet another day when I go to bed less stupid 🌞 Thank you for sharing

@UWOODWORKER

2 жыл бұрын

Thanks for watching. Good night))

Es muy inspirador verlo trabajar por todos los trucos que sabe felicitaciones.

El mejor truco que he visto, genial.

2:56 is magic!

Perfeito. Fiquei surpreso com a do ferro de passar e a do tronco que virou um barrote.

Очень понравился метод распила бревнышка на циркулярке в два этапа с использованием двух квадратов. Super!

@UWOODWORKER

2 жыл бұрын

🤝

Hot glue instead of brad nails works wonders for the log trick as well!

Excelente vídeo. Parabéns 👍🏻👏🏻👏🏻👏🏻

Back in 1958, I was 10, my Dad showed me the using of a bar of soap on wood screws to thread them into wood.

Hermano, muchas felicidades, y gracias por el video, son muy buenos tips. Saludos desde Tlajo Jal Mex.

@UWOODWORKER

2 жыл бұрын

thanks, friend!

Another excellent video...all extremely helpful tips. Thanks and keep up the great work.

3:53 Soap works just as well as fat. Plus it is more readily available and nicer to keep in your tool kit.

@jasondoust4935

2 жыл бұрын

Grease is fantastic, especially for long construction screws. I keep a piece of an old candle in my apron for this purpose. (And an old bit of surfboard wax in my bench drawer.) They're also brilliant for making my plane soles slick again on tough old Australian hardwood.

Belles idées. Merci de vos bons conseils.

@UWOODWORKER

2 жыл бұрын

Thanks for watching!

особенно понравилась столярная хитрость с проводами.

Excelentes ideas!

So many nice tips 👍

@UWOODWORKER

2 жыл бұрын

thank you, friend!

Bien merecido ese reconocimiento👏👏👏👏

Gracias...es genial👌👍👏👏👏

Every time I see the "cable under a bar" trick, I shake my head. No in amazement of releasing it so easily, but I have never ever had a cable in this situation--it is always the cable -fully under the bar- in which I must raise the table, bookcase, or whatever. Show me levitation trick, and then I'll be amazed. :)

Que buenos trucos de carpintería, sobre todo de los cables.

Hola muy buen video saludó cordial Daniel de Argentina

thanks for your nice ideas

Thanks for the video. Going to try the raw wood on table saw idea. Thanks

@jonblocker7709

2 жыл бұрын

Ppl

DELIGHT! You never cease to amaze) Where did you get such a rarity, a well-preserved iron since 1967?

@UWOODWORKER

2 жыл бұрын

Thanks for the support!!! This iron is very rare and in such excellent condition. It spent a long time in the abandoned garage of my friends. They gave it to me. I gave him a second life)))

Nice video. What was the purpose (time marker :49) of showing the serial number on the iron?? People might think that you have to have that iron to make it work, which is not the case.

@UWOODWORKER

2 жыл бұрын

no, any iron will do it)

@rodman0088

2 жыл бұрын

I believe he was just showing the 'year' of the iron and what great shape it was in. Just my opinion.

@UWOODWORKER

2 жыл бұрын

@@rodman0088 yes

Great idea!

Fita adesiva marcar furos , boa idéia, obrigado

Excellent!

thank my fc you i thailand your knowlage

Всем доброго времени суток!!! Молодец всё оригинально и коротко, без лишних слов-СПС!!!!

@alekssax5370

2 жыл бұрын

И инструмент достойный!!!

@alekssax5370

2 жыл бұрын

А главное руки и ясная голова!!!

@UWOODWORKER

2 жыл бұрын

Спасибо за поддержку 🤝

You can also use Methylated spirits to remove dents in timber. Dab with a soaked rag or use an eye dropper let soak in and set fire to it. Radical I know but it's a winner.

@rickwaldripsr.5113

2 жыл бұрын

I use the old iron trick myself, but I’m going to try yours. Sounds WAY more fun!!

@jasondoust4935

2 жыл бұрын

Nice. I can warm my hands by it in a Canberra winter. :-) (It's not too miserable in my garage, as long as I keep working!)

ГЕНИТАЛЬНЫЕ советы!

very helpfull for new comers & for the person with eco problem

Many thanks 😊

Great tips. Thanks so much!

@UWOODWORKER

2 жыл бұрын

Thanks for watching and support!

Ты где такой утюжок откопал? Он всего на два года, моложе меня!

@UWOODWORKER

2 жыл бұрын

Эхо советских времён)

That cord trick got me messed up. For the life of me, I cannot figure out how he did that 😯

@ericwilliams538

2 жыл бұрын

Yeah, I saw that and immediately pressed pause, and scrolled down to the comments section!!!

@imtp70

2 жыл бұрын

It's from above the pipe. If it would be below the pipe, no tricks will work.

@UWOODWORKER

2 жыл бұрын

the KZread player has a function to slow down playback))) this is another trick from me))

@UWOODWORKER

2 жыл бұрын

@imtp70 no, from below

@doylewilson6673

2 жыл бұрын

@@imtp70 thanks

Genial

No doubt you are a clever fellow but my best one that I liked was the cord trick that was stuck under table of course I would have just left the table up but I can see where that trick would come in handy and a table that you could not pick up good job!

Klasse !!!!!!

Τhe best of...

Fantastic

@UWOODWORKER

2 жыл бұрын

thanks, friend!

Some of the oldest woodworking tricks in the books. tho not many kids know about them.

@UWOODWORKER

2 жыл бұрын

Yes I agree. be sure to read books

Can u show us tips w/o expensive tools?

@UWOODWORKER

2 жыл бұрын

yes I can. if your comment gets a lot of support, I will think about your suggestion. Also, if people support it, I'm ready to create a whole section "tips w/o expensive tools" - GO!!!

@UWOODWORKER

2 жыл бұрын

it is my old video, w/o tools - kzread.info/dash/bejne/gXaHuatymdbUZps.html

At 2:33, you can fold back the bottom of the scotch tape to collect dust; thanks for this video!

4.33 , 6.40 👏👍👍

@UWOODWORKER

2 жыл бұрын

Thanks for your watching and comment! 👍

Show!!!!!!

@UWOODWORKER

2 жыл бұрын

glad you liked it!

Minuto 1:05 no es la misma madera inicial, las hebras no coinciden.

👍😃👏😊👍👍 Век живи- век учись!

👏👏👏👏Very good.

Iron from 1967???

@UWOODWORKER

2 жыл бұрын

yeeess!!! This is a rarity 😉

The Perfect day to start any job, tomorrow. Why there's nothing that can't be accomplished, tomorrow.

I keep a bar of soap around for that wood screw lube trick.

@UWOODWORKER

2 жыл бұрын

it is right

The blade is to high.

Well developed and executed content. This display of concept skill and execution meets the high standard of This Teacher. Bravo!

@UWOODWORKER

2 жыл бұрын

It's a pleasure to read such comments, they motivate us to make more videos! thank you, friend

Killer video. Subbed. 👍👍

That first tip works on carpets too.

At 4:38. NO PUSH STICKS!!!! Dude, use push sticks, your fingers will thank you later in life when you find that you still have them.

Der erste Trick funktioniert nur wenn die Fasern des Holzes nicht durch trennt sind. Eigentlich zu leicht wenn ein Schreiner es sagt

👍👍👍

Minuto 4:00 en el centro esa madera es más blanda, el primero tornillo lo coloca más alejado del centro.

👏🏼👏🏼👏🏼🤝🏼

At 4:45AM, interesting ...

@UWOODWORKER

2 жыл бұрын

=)

Не, ну сало вместо мыла, это жестоко.😂

@UWOODWORKER

2 жыл бұрын

Это работает и это главное!

@user-in8vp5zd3h

2 жыл бұрын

@@UWOODWORKER работает конечно, но свечка или мыло, как-то привычнее. Салом надо пищевод смазывать, чтобы беленькая глубже входила😂

@UWOODWORKER

2 жыл бұрын

😂

The bird chirping is maddening!!!!

☺️👍

buena😝✌🇨🇱🇨🇱🇨🇱

Пофигу на вилку и шнур, вот саморез с салом/мылом больше возмутил: золотой саморез битой ph2 не закручивается, а чёрный закручивается и он войдёт даже без сала, просто изначально нужна правильная бита

"The Fat" haha, love it!

@SwissTrippin

2 жыл бұрын

From an Indian mom's tenderloin

А теперь утюгом также, только уже на лакерованной поверхности.

Good video...and useful...

@UWOODWORKER

2 жыл бұрын

👍😉

3:01 Brain : "syntax error"

5:40?

Never ever drill that close to the edge of brick. And use a hammer drill next time😒

Perché non c'è la traduzione in lingua italiana ?

Phillips screws for construction/woodwork are no good.

2:56 less of a tip and more of a magic trick lol

Grees is better than wax

Ничего нового.

Некоторые советы не советы, а обычный процесс работы без каких либо хитростей по типу как бы я вчера закрутил шуруп под углом если бы сегодня не посмотрел этот ролик!

@likitoni371

2 жыл бұрын

Я тоже согласен с этим.

1 хитрость похожа на обман

@UWOODWORKER

2 жыл бұрын

100% работает. Пробуйте! О результатах напишите

Not sure ingenious is it .no accuracy displayed at all marking lines on wall across the shoulders of the level and marking paper when u just measure it .glowing bits of wood together that are t flush at the ends when done .its pleasant carpentry for people who cant read a tape measure

Dislike for that 3:00 Put straight wire under the pipe and remove.

@UWOODWORKER

2 жыл бұрын

What?????

@imtp70

2 жыл бұрын

@@UWOODWORKER lift the table. Put cord under the rod. Than you show the trick of removing the cord.

@UWOODWORKER

2 жыл бұрын

@@imtp70 This table weighs 100 kg. You are welcome to help)

убью за сало,лучше не закрутить самарез

Салом саморез? Совсем зажрались!

Los trucos de este son tan reveladores como tomar el martillo con una mano y con la otra el clavo, por favor.

🤣🤣🤣😂😂🤣😅 !!!!!! THXXXXXXX 😜🤪😜 @+^^

3:03 fake

хотелось бы понять- кто у кого пиздит идеи и ролики. Мне кажется, эту медленную хуйню я просмотрел на десятке каналов.

Bullshit on the stuk cord. Other stuff was cool

@UWOODWORKER

2 жыл бұрын

thank for watching and opinion!

Я далеко не столяр и не плотник, но НИЧЕГО нового или оригинального не увидел. Многое помню ещё со школьных уроков труда. И, кстати, кое-что можно сделать и проще и эффективнее. Для примера - от сала остаются жирные пятна, возьми мыло. Перенос размеров скотчем. А рулеткой, линейкой не проще, не быстрее? С теми же квадратами на торце полена, что мешает обработать без перестановки сразу ДВЕ стороны? Так что, честно говоря, и не понял, за что Серебряная Кнопка?