No video
Infiniti Q45. Front Sway Bar Links. Clunking noises
Also known as stabilizer bar connecting rods. It's a fairly simple process once the car is secure and the wheels are off.
If you would like to make a donation in support of the channel, here is a PayPal link:
www.paypal.com...
Пікірлер: 19
Thanks for the video. Im about to do this project at the end of the week and this helps a ton!
Thank you. Those are exactly the ones I bought for my M45 and the clunking is horrible. I will confirm whether I installed them the wrong way.
Thanks for the info. I too have my steering wheel worn out from the sides it kinda sucks 😂
@EdBwoy
5 жыл бұрын
Haha, now you've gotten me a little self conscious. I hadn't noticed the issue, it was probably too shaky for me to notice the cosmetics.
E, do you have Advance Auto Parts in your area too? I've learned they have good online discounts so you can order a part online with say a 15-25% discount code and pickup at a local store.
@EdBwoy
5 жыл бұрын
Not very close, but I do shop there once in a while. I get decent discounts at O'Reilly's and AutoZone plus I do the aitozone rewards
Did you also have a rattle with that clunk When idling?
@EdBwoy
Жыл бұрын
No, the noise was only present when in motion
Do you have a video of changing these on the 2006-2010 M?
@EdBwoy
4 жыл бұрын
kzread.info/dash/bejne/dY19mMZ7k7OelZM.html
Question do i don't have a impact. Can i still get the bolts off ?
@EdBwoy
3 жыл бұрын
Yeah, just use a breaker bar then regular ratchet. This impact tool isn't all that powerful, it's just to save me the frequent repetitive motion.
@zoidzoid87
3 жыл бұрын
@@EdBwoy okay thanks that's what I thought because when I tried to turn it with just the ratchet it didn't budge.
Ed what is the best location to lift the front end of a 2003-2004 Infiniti M45 off the ground, please advise. Thanks
@EdBwoy
5 жыл бұрын
What are you lifting the car with, and what task are you planning to do?
@TboneM45infiniti00
5 жыл бұрын
@@EdBwoy I'm using a 3.5 ton floor jack and i do have jacks stands, to change the stabilizer bars and the O2 sensor's and cam/crank shaft position sensor.
@EdBwoy
5 жыл бұрын
@TboneM45infiniti00 I use a part of the subframe under the engine. It is a beefy lift point right in front of the steering rack
@TboneM45infiniti00
5 жыл бұрын
@@EdBwoy Thx for the insight bro, keep up the good work.
@EdBwoy
5 жыл бұрын
@@TboneM45infiniti00 stay safe. And if you learn something new, share with us